Field Notice: FN - 62215 - ONS 15454 False Mismatched Equipment Attributes (MEA) Alarm with Cisco ONS 15454 HD Shelf with Correct B-Side BNC and SMB EIA Panels

Available Languages

Updated:February 14, 2006

Document ID:FN62215

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

February 14, 2006

NOTICE:

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Products Affected

Products Affected	Comments
15454 - 15454-EIA-1BNCB24=	Issue has been corrected in Software
15454 - 15454-EIA-1BNCB48=	Issue has been corrected in Software
15454 - 15454-EIA-1SMBB84=	Issue has been corrected in Software
15454 - 15454-SA-HD	Issue has been corrected in Software
15454 - 15454-SA-HD=	Issue has been corrected in Software
15454 - 15454-SA-HDAHDB2=	Issue has been corrected in Software
15454 - 15454-SA-HDAHDB=	Issue has been corrected in Software
15454-R6.0.0SWCD - R6.0.0	Issue has been corrected in Software

Problem Description

During initial system installation and turn-up of a B-Side EIA panel, or an upgrade to R6.0.0 software, a false MEA alarm against the BIC-B (EIA) panel will be raised if the system matches the system configuration identified above under Products Affected. The Cisco ONS 15454 R6.0 software has been improperly populated to raise an MEA alarm against the BIC-B (EIA panel) when either a 1BNCB48, 1BNCB24, or 1SMBB84 version EIA panel is installed on an SA-HD version shelf assembly. These three EIA panels are compatible with the SA-HD shelf assembly. This MEA alarm is not service impacting, but causes a standing alarm (CR, SA).

Background

The MEA against the BIC (EIA panel) is designed to allow the system to verify that the correct type of EIA panel is installed on a shelf assembly. If an incorrect EIA panel is installed on the shelf assembly, this can result in interface ports to the system becoming unusable. Release 6.0.0 software was incorrectly coded to include the 1BNCB48, 1BNCB24, and 1SMBB84 EIA panels as not compatible with the SA-HD version shelf assembly.

Problem Symptoms

A standing MEA against the BIC-B EIA panel will be raised.

Workaround/Solution

This issue has been corrected in software releases 6.0.1 and 7.0.0. The MEA alarm against the BIC-B is not service affecting for this configuration and can be ignored until the node is upgraded. Replacing the EIA panels will not correct this issue.

DDTS

To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.

DDTS	Description
CSCsb90576 (registered customers only)	Getting MEA alarm for BIC-B on a HD 15454 shelf

Revision History

Revision	Date	Comment
1.0	10-FEB-2006	Initial Public Release

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.