Guest

Cisco PGW 2200 Softswitch

Field Notice: Certain MGCP Error Codes Received From the MGCP Gateway May Impact Call Processing on the PGW


February 12, 2005


Products Affected

Product

Comments

PGW -

Release 9.5(2) System Patch 19 and 20

Problem Description

This problem affects customers using Media Gateway Control Protocol (MGCP) based public switched telephone network (PSTN) gateway solution. The system cannot make any calls after a call failure with certain MGCP error codes are received by the Cisco PGW.

Background

  • PGW 9.5(2) System patch 19 and 20 may cause the problem.

  • The issue is fixed in PGW 9.5(2) System Patch 21.

Problem Symptoms

Call processing may be impacted. Cannot make any calls after a call failure with certain MGCP error codes received by the Cisco PGW.

Workaround/Solution

  • Do not load PGW 9.5(2) System patch 19 and 20.

  • The issue is fixed in PGW 9.5(2) System Patch 21.

  • If PGW 9.5(2) system patch 19 or 20 is installed, immediately install Patch 21.

  • A switch over clears the issue.

DDTS

To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.

DDTS

Description

CSCsa60930 (registered customers only)

Can't Make any SS7 calls after a call failed with MGCP 510 error

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.