Cisco IAD2400 Series Integrated Access Devices

Field Notice: Cisco IAD2400 Installation Safety Notice

October 18, 2004

Products Affected

  • IAD2430-24FXS

  • IAD2431-16FXS

  • IAD2431-1T1E1

  • IAD2431-8FXS

  • IAD2432-24FXS

Problem Description

When the Cisco IAD2430-24FXS, Cisco IAD2431-8FXS, Cisco IAD2431-16FXS, Cisco IAD2431-1T1E1, and Cisco IAD2432-24FXS products are wall-mounted such that the cables connecting to the product are pointing toward the ceiling or floor, the resulting top panel ventilation openings exceed the dimensional limits of the applicable safety standards.

The following mounting configurations are fully compliant:

Rack mounted, Table top and wall mounted with the cables connecting to the product exiting left or right.


When these products are incorrectly wall mounted, as illustrated below, the oversized top openings may allow the entry of foreign objects into the platform.


Click for picture enlargement

Problem Symptoms

There is no specific problem symptoms related to this issue. Adhere to the recommended installation procedures outlined in Cisco documentation per the request of this Field Notice.


Mount the product by rotating it 90 degrees such that the cables exit either the left or the right side, consistent with Figure 3-10 of Chapter 3 of the hardware installation guide:

Cisco IAD2400 Hardware Installation Guide

The following illustration is the proper wall mount orientation per hardware installation guide link provided above:


Click for picture enlargement

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.