Field Notice: VG248 Upgrade Required For Use With Cisco CallManager 4.0(1)

Available Languages

Updated:June 1, 2004

Document ID:FN29374

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Updated June 1, 2004

April 14, 2004

Products Affected

VG248 Version 1.2(1)

Problem Description

With VG248 version 1.2(1), conferencing and supervised transfers fail when the gateway is registered to Cisco CallManager release 4.0(1)

Background

Changes in CallManager 4.0(1) required changes to the VG248 code.

Problem Symptoms

VG248 will not be able to initiate an Ad-Hoc conference nor complete a supervised transfer.

Workaround/Solution

An upgrade to engineering special build 1.2(1)ES10.2 is required. This version can be found on the Cisco VG248 Analog Telephone Gateway software page on Cisco.com.

Remember that you must first log in with your CCO Username and Password. If you do not have a CCO account go to the Cisco.com Registration page and register.

DDTS

To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.

DDTS	Description
CSCuk49338 (registered customers only)	Supervised transfer does not work properly with CCM 4.0(x)
CSCin68424 (registered customers only)	Conference does not work properly with CCM 4.0(x)

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.