Guest

Cisco Unified MeetingPlace

Field Notice: MeetingPlace Server - Only the First Half of the Ports from Each Span Configured as E1 QSIG Works


May 17, 2004


Products Affected

Product

Comments

Cisco MeetingPlace Server 8112 (M3)

Versions: 5.1.0x and 5.1.1b

Problem Description

Only the first half of the ports from each span, configured as E1 QSIG, work if connected to a PBX configured for QSIG - ECMA.

All E1 QSIG servers should have this hot fix applied.

Problem Symptoms

Server cannot be configured to support QSIG.

Workaround/Solution

WORKAROUND:

None

SOLUTION:

A cpserver hot fix is available for 5.1.1e. Contact the Cisco MeetingPlace Technical Assistance Center to apply this hot fix.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.