May 20, 2004
Note: This Field Notice is a legacy Latitude Field Notice that has been converted to the Cisco format so the information would remain available to their customers.
If a user schedules a meeting on conference server 8 of a network environment and adds a power point presentation to the meeting, then the power point presentation will not be viewable in slide show mode.
Note:?This problem only occurs when the user schedules their meeting on the 8th conference server of a MeetingPlace network environment.
Users will not be able to view power point presentations in slide show mode if their meetings are scheduled on the 8th conference server of a MeetingPlace network environment.
Don't schedule on the 8th conference server if you intended to use slide show.
Installation Instructions for 188.8.131.52.6
If you are planning to apply this hot fix for a new installation of 184.108.40.206 or an upgrade to 220.127.116.11 Read these instructions carefully. At the end of a 18.104.22.168 installation or upgrade, the installer will prompt you to "restart now", "restart later", or "Finish". Before answering this question and proceeding, apply this hot fix by following the below instructions.
If you are applying this hot fix to an existing 22.214.171.124 system then ignore the previous two sentences and just follow the instructions below.
Make sure that this hotfix distribution package does not install files that have already been customized on your MeetingPlace Web server. If your MeetingPlace Web server has some customizations, please confirm with Latitude Communications whether this hotfix distribution package can be applied 'as is' on your server or needs to have some of your customizations re-applied.
Stop the MeetingPlace Web Conferencing service. This will stop all other MeetingPlace Web services and the World Wide Web Publishing service.
Note:?If you are doing a new install of 126.96.36.199 or an upgrade, you may not see the MeetingPlace Web Conferencing service. In this case, just proceed with the next step.
If you are using the ZIP version of this package, mpweb430_63_x.zip, double-click on it to launch the Winzip interface. Choose the 'Extract' option. Select the root folder of your MeetingPlace Web installation. Typically: C:\Latitude\MPWEB. Make sure options 'All files' and 'Use folder names' are selected. Click on 'Extract'. Confirm the file or files replacement if necessary.
If you are using the EXE version of this package (mpweb430_63_x.exe), execute the distribution package to launch the Winzip Self-Extractor program. Set the field 'unzip to folder' to the root folder of your MeetingPlace Web installation (Typically: C:\Latitude\MPWEB). Choose 'Unzip' to extract the whole content of the hotfix distribution package. All updated files will be extracted to their corresponding subfolders. If necessary, confirm the file or files replacement.
If you install this hotfix package on the external server of a DMZ-C configuration, you need to go to the 'DataSvc' folder and copy the files mpagentext.exe, mpagentext.map and mpagentext.pdb over the files mpagent.exe, mpagent.map and mpagent.pdb respectively.
Start the MeetingPlace Web Conferencing service. This will start all other MeetingPlace Web services and the World Wide Web Publishing service.
Note:?If you are doing a new install of 188.8.131.52 or and upgrade just go ahead and press "Yes" to restart the system at this point.
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.