Guest

Cisco IAD2400 Series Integrated Access Devices

Field Notice: *Expired* FN - 28515 - IAD-2430 Chassis Guard - Safety Regulation


Revised April 20, 2008
January 19, 2004


NOTICE:

THIS FIELD NOTICE HAS BEEN EXPIRED AND IS NO LONGER MAINTAINED OR UPDATED BY CISCO.

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE, WARRANTY OR SUPPORT. USE OF THE INFORMATION ON THIS FIELD NOTICE OR MATERIALS LINKED FROM THIS FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Products Affected

Product

Top Assembly Part Number

Comments

IAD2430-24FXS

800-23164-03

Any IAD2430-24FXS not shipped with the chassis guard.

IAD2431-8FXS

800-21619-03

Any IAD2431-8FXS not shipped with the chassis guard.

IAD2431-16FXS

800-21616-03

Any IAD2431-16FXS not shipped with the chassis guard.

IAD2431-1T1E1

800-21617-03

Any IAD2431-1T1E1 not shipped with the chassis guard.

IAD2432-24FXS

800-21618-03

Any IAD2432-24FXS not shipped with the chassis guard.

  

Problem Description

New chassis safety guard introduction to extend environment deployments.

These products can be installed in a rack, but if mounted on a wall, the floor must be cement or another noncombustible material. Some existing customers who need to install the device over a floor with combustible material may not have the appropriate accessory kit to do this safely.

Currently, the Cisco IAD2430 Series Integrated Access Devices Quick Start Guide, has a warning and a caution regarding wall mounting.

See the Cisco IAD2430 Series Integrated Access Devices Quick Start Guide for caution statements relating to wall mounting.

Background

These products where release with restrictions on how and where they can be mounted.

Warnings are in the Regulatory Compliance and Safety Information and on Quick Start Guide.

The new chassis safety guard will now allow for wall mounting in previously restricted environments.

Problem Symptoms

If the floor is not concrete or a combustible material, you can not mount the unit either horizontally or vertically on a wall, this will expose the possibility of burning material to fall out of the underside venting holes.

Workaround/Solution

Cisco has added a new optional chassis guard to the accessory kit. The chassis guard is mandatory to meet Safety Regulations for customers who need to mount the unit over a floor with combustible material. The unit must be mounted vertically for chassis guard to be in effect to meet the following Safety Regulations for installation areas with floors with combustible material:

North America

Safety UL60950, CAN/CSA-22.2 NO. 60950

European Union

Safety EN 60950, IEC 60950

Other Counties:

Safety TS001, AS/NZS 3260 with Amendment 1,2,3 and 4

Refer to the Cisco IAD2430 Series Integrated Access Devices Quick Start Guide for detailed information on the installation of the chassis guard.

How to Obtain a New Accessory Kit

To obtain the chassis guard if one does not exist in the accessory kit received, contact iad2400-interest@cisco.com with your name, company and address and the kit will be promptly sent to you.

Regulatory Compliance and Safety Information

Cisco IAD2430 Series Integrated Access Devices Quick Start Guide

Marketing Contacts:

Cisco IAD2400 alias, iad2400-interest@cisco.com

Jennifer Blatnik, Product Manager, jennyng@cisco.com

Andy Chen, Technical Marketing Engineer, andychen@cisco.com

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.