Revised October 18, 2006
July 31, 2001
THIS FIELD NOTICE HAS BEEN ARCHIVED AND IS NO LONGER MAINTAINED OR UPDATED BY CISCO.
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE, WARRANTY OR SUPPORT. USE OF THE INFORMATION ON THIS FIELD NOTICE OR MATERIALS LINKED FROM THIS FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
CWM 10.4.01 patch 2
Patch 2 for Cisco WAN Manager (CWM) 10.4.01 has been removed from CCO
CWM patch 2 reintroduced some bugs which had been previously resolved in patch 1. Patch 2 has been removed from CCO.
Patch 2 contained a list of DDTS fixes that were included in the build. However, as part of the rev down process from another baseline, some DDTS fixes that existed in patch 1 were omitted.
Refer to Release Notes below for patch 1 for the DDTS:
Patch 3, which will resolve this issue, is scheduled to post to CCO on August 14, 2001. Until then, the customer has two alternatives. First, if the network is unaffected by the DDTS list below they can continue to operate normally, and install patch 3 when available. Second, they could perform a baseline CWM 10.4.01 installation, and then install patch 1.
To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.