Field Notice: *Expired* FN - 13018 - ONS15454 TL1 Commands ENT-CRS-VT1 and DLT-CRS-VT1 Cause TCC Resets

Available Languages

Updated:October 23, 2007

Document ID:FN13018

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Revised October 23, 2007

December 17, 2000

NOTICE:

THIS FIELD NOTICE HAS BEEN EXPIRED AND IS NO LONGER MAINTAINED OR UPDATED BY CISCO.

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE, WARRANTY OR SUPPORT. USE OF THE INFORMATION ON THIS FIELD NOTICE OR MATERIALS LINKED FROM THIS FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Products Affected

Product	Comments
ONS 15454	Version 2.2.x -- All Revisions Version 2.2.3

Problem Description

Using Transaction Language Ones (TL-1s) ENT-CRS-VT1 and DLT-CRS-VT1 with an invalid CCT (cross connect type) of UPSR, UPSR-DC, UPSR-DROP, UPSR-EN, UPSR-HEAD, and UPSR-UPSR will cause the TCC to reboot.

Background

This problem was detected during system verification testing.

Problem Symptoms

In a system running software version 2.2.x, using the TL-1 commands ENT-CRS-VT1 and DLT-CRS-VT1 with an invalid CCT of UPSR, UPSSR-DC, UPSR-DROP, UPSR-EN, UPSR-HEAD and UPSR-UPSR cause the TCC to reboot.

Workaround/Solution

There is currently no TL-1 workaround. If you need to create or delete a VT UPSR cross connect, you need to use the Cisco Transport Controller (CTC).

This problem will be corrected with the release of version 3.0.x of the software.

DDTS

This defect has Cisco bug IDs CSCds80951 and CSCds80946. To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.

DDTS	Description
CSCds80951 (registered customers only)	TL-1: dlt-crs-vt1 on UPSR circuits causes TCC to reset or reboot.
CSCds80946 (registered customers only)	TL-1: ent-crs-vt1 with upsr type causes TCC to reset.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.