Cisco Security Advisory
Click Icon to Copy Verbose Score
CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N/E:X/RL:X/RC:X
-
Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform path traversal attacks on the underlying operating system to either elevate privileges to root or read arbitrary files. To exploit these vulnerabilities, an attacker must have valid Administrator credentials on the affected device.
For more information about these vulnerabilities, see the Details section of this advisory.
Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-traversal-ZTUgMYhu
-
Vulnerable Products
At the time of publication, these vulnerabilities affected Cisco ISE.
For information about which Cisco software releases were vulnerable at the time of publication, see the Fixed Software section of this advisory. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products section of this advisory are known to be affected by these vulnerabilities.
-
The vulnerabilities are not dependent on one another. Exploitation of one of the vulnerabilities is not required to exploit the other vulnerability. In addition, a software release that is affected by one of the vulnerabilities may not be affected by the other vulnerability.
Note: These vulnerabilities can be exploited only by valid and authorized users of the Cisco ISE system. As a best practice, customers can restrict console access and admin web access. To configure the access restrictions, choose Administration > System > Admin Access > Settings > Access > IP Access.
Details about the vulnerabilities are as follows:
CVE-2023-20166: Cisco ISE Path Traversal Vulnerability
A vulnerability in the CLI of Cisco ISE could allow an authenticated, local attacker to perform a path traversal attack to escape the restricted shell and gain root privileges on the underlying operating system.
This vulnerability is due to improper validation of parameters that are sent by a certain CLI command within the restricted shell. An attacker could exploit this vulnerability by logging in to a device and issuing a certain crafted CLI command. A successful exploit could allow the attacker to escape the restricted shell and gain root privileges on the underlying operating system of the affected device. To exploit this vulnerability, the attacker must be an authenticated shell user.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
Bug ID(s): CSCwd07350
CVE ID: CVE-2023-20166
Security Impact Rating (SIR): Medium
CVSS Base Score: 6.0
CVSS Vector: CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:NCVE-2023-20167: Cisco ISE Path Traversal Vulnerability
A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to read arbitrary files on the underlying operating system of an affected device. To exploit this vulnerability, an attacker must have valid Administrator level privileges on the affected device.
This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web application. A successful exploit could allow the attacker to read arbitrary files of specific types from the underlying operating system.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
Bug ID(s): CSCwe17953
CVE ID: CVE-2023-20167
Security Impact Rating (SIR): Medium
CVSS Base Score: 4.9
CVSS Vector: CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N
-
There are no workarounds that address these vulnerabilities.
-
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Fixed Releases
At the time of publication, the release information in the following table(s) was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.
The left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerabilities that are described in this advisory and which release included the fix for these vulnerabilities.
CVE-2023-20166
Cisco ISE Release First Fixed Release 2.7 and earlier Not vulnerable. 3.0 Not vulnerable. 3.1 Not vulnerable. 3.2 3.2P2 CVE-2023-20167
Cisco ISE Release First Fixed Release 2.7 and earlier Migrate to a fixed release. 3.0 Migrate to a fixed release. 3.1 3.1P8 (Aug 2023) 3.2 3.2P2 For instructions on upgrading a device, see the Upgrade Guides located on the Cisco Identity Service Engine support page.
The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.
-
The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerabilities that are described in this advisory.
-
CVE-2023-20166: This vulnerability was found during internal security testing by X.B. of the Cisco Advanced Security Initiatives Group (ASIG).
CVE-2023-20167: This vulnerability was found during internal security testing by Arthur Vidineyev of the Cisco ASIG.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Show LessVersion Description Section Status Date 1.0 Initial public release. — Final 2023-MAY-17
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.