AV:N/AC:M/Au:S/C:C/I:C/A:C/E:F/RL:OF/RC:C
-
Cisco Unified Communications Manager (Unified CM) contains multiple vulnerabilities that could allow an unauthenticated, remote attacker to modify data, execute arbitrary commands, or cause a denial of service (DoS) condition.
Cisco has released software updates that address these vulnerabilities. This advisory is available at the following link:
http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20130821-cucm
-
Vulnerable Products
The following products are affected by the vulnerabilities that are described in this advisory:
- Cisco Unified Communications Manager 7.1(x)
- Cisco Unified Communications Manager 8.5(x)
- Cisco Unified Communications Manager 8.6(x)
- Cisco Unified Communications Manager 9.0(x)
- Cisco Unified Communications Manager 9.1(x)
Note: Cisco Unified Communications Manager version 8.0 reached the End of Software Maintenance on October 23, 2012. Customers using Cisco Unified Communications Manager 8.0(x) versions should contact their Cisco support team for assistance in upgrading to a supported version of Cisco Unified Communications Manager.Products Confirmed Not Vulnerable
No other Cisco products are currently known to be affected by these vulnerabilities.
-
Cisco Unified Communications Manager is the call processing component of the Cisco IP Telephony solution that extends enterprise telephony features and functions to packet telephony network devices, such as IP phones, media processing devices, VoIP gateways, and multimedia applications. Cisco Unified Communications Manager contains multiple vulnerabilities that could allow an unauthenticated, remote attacker to cause a DoS condition or execute code remotely.
Denial of Service Vulnerabilities
Cisco Unified Communications Manager 7.1(x) contains a vulnerability that could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. The vulnerability is due to improper error handling . An attacker could exploit this vulnerability by sending malformed registration messages, resulting in a DoS condition on an affected device. This vulnerability is documented in Cisco bug ID CSCuf93466 (registered customers only) and has been assigned the Common Vulnerabilities and Exposures (CVE) ID CVE-2013-3459. This vulnerability affects only Cisco UCM versions 7.1(x).
Cisco Unified Communications Manager 8.5(x), 8.6(x), and 9.0(x) contain a vulnerability that could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. The vulnerability is due to insufficient limiting of traffic on certain UDP ports. An attacker could exploit this vulnerability by sending UDP packets at a high rate to certain ports on an affected device, resulting in a DoS condition on the affected device. This vulnerability is documented in Cisco bug ID CSCub85597 (registered customers only) and has been assigned the CVE ID CVE-2013-3460.
Cisco Unified Communications Manager versions 8.5(x), 8.6(x) and 9.0(1) contain a vulnerability that could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. The vulnerability is due to insufficient rate limiting of traffic on the Session Initiation Protocol (SIP) port. An attacker could exploit this vulnerability by sending UDP packets at a high rate to port 5060 on an affected device. A sustained attack could allow the attacker to cause a DoS condition on the affected device. This vulnerability is documented in Cisco bug ID CSCub35869 (registered customers only) and has been assigned the Common Vulnerabilities and Exposures CVE ID CVE-2013-3461.
Buffer Overflow Vulnerability
Cisco Unified Communications Manager 7.1(x), 8.5(x), 8.6(x), 9.0(x) and 9.1(x) contain a vulnerability that could allow an authenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient bounds checking. An attacker could exploit this vulnerability by overwriting an allocated memory buffer on an affected device. An exploit could allow the attacker to corrupt data, disrupt services, or run arbitrary commands. This vulnerability is documented in Cisco bug ID CSCud54358 (registered customers only) and has been assigned the CVE ID CVE-2013-3462. This vulnerability affects Cisco UCM versions 7.1(x) through 9.1(1x).
-
No workarounds are available for these vulnerabilities.
-
When considering software upgrades, customers are advised to consult the Cisco Security Advisories, Responses, and Notices archive at http://www.cisco.com/go/psirt and review subsequent advisories to determine exposure and a complete upgrade solution. Cisco recommends upgrading to a release equal to or later than the release in the "Recommended Release" column of the following table:
Identifier
CVE ID
Cisco Unified Communication Manager Version First Fixed
Recommended Release CSCud54358: Insufficient Boundary Check of Input Buffer CVE-2013-3462 7.x 7.1(5b)su6 7.1(5b)su6a CSCuf93466: Improper Error Handling of Malformed Registration Messages CVE-2013-3459 7.x 7.1(5b)su6a 7.1(5b)su6a CSCub85597: Memory Leak Observed During UDP Flood CVE-2013-3460 8.x 8.5(1)su6,
8.6(2a)su3,
8.6(5)BE3K8.5(1)su6,
8.6(2a)su3,
8.6(5)BE3K
CSCub35869: High CPU Utilization and Memory Leak During UDP Flood CVE-2013-3461 8.x 8.6(2a)su3,
8.6(5)BE3K
8.6(2a)su3,
8.6(5)BE3K
CSCud54358: Insufficient Boundary Check of Input Buffer CVE-2013-3462 8.x 8.5(1)su6,
8.6(2a)su3
8.5(1)su6,
8.6(2a)su3CSCub85597: Memory Leak Observed During UDP Flood CVE-2013-3460 9.x 9.1(1) 9.1(2) or later CSCub35869: High CPU Utilization and Memory Leak During UDP Flood CVE-2013-3461 9.x 9.1(1) 9.1(2) or later CSCud54358: Insufficient Boundary Check of Input Buffer CVE-2013-3462 9.x 9.1(2) 9.1(2) or later *Note: Cisco Unified Communications Manager Version 8.5(1)su6 is targeted for release in mid-September 2013. Customers running Cisco Unified Communications Manager Version 8.5 are encouraged to upgrade to 8.6 for complete coverage for all vulnerabilities listed in this advisory.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
-
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerabilities that are described in this advisory.
These vulnerabilities were found during internal testing.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Revision 1.0 2013-August-21 Initial public release
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A stand-alone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy, and may lack important information or contain factual errors. The information in this document is intended for end-users of Cisco products.