Cisco Security Advisory-
This is the Cisco Product Security Incident Response Team (PSIRT) security advisory related to a posting entitled "Cisco Unified Videoconferencing multiple vulnerabilities" by Florent Daigniere of Matta Consulting regarding vulnerabilities in the Cisco Unified Videoconferencing (Cisco UVC) 5100 series products. Several of the vulnerabilities also impact Cisco Unified Videoconferencing 5200 and 3500 Series Products.
Cisco has released software updates that address these vulnerabilities.
Workarounds that mitigate some of these vulnerabilities are available.
This advisory is posted at https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20101206-cuvc.
-
These vulnerabilities affect the following Cisco UVC Linux operating system products:
-
Cisco Unified Videoconferencing 5110 System
-
Cisco Unified Videoconferencing 5115 System
The following Cisco UVC VxWorks operating system products are affected by a subset of these vulnerabilities. The Details for Reported Vulnerabilities section indicates if products that are based on the Linux operating system, the VxWorks operating system, or both are affected by an individual vulnerability.
-
Cisco Unified Videoconferencing 5230 System
-
Cisco Unified Videoconferencing 3545 System
-
Cisco Unified Videoconferencing 3527 Primary Rate Interface (PRI)
Gateway
-
Cisco Unified Videoconferencing 3522 Basic Rate Interfaces (BRI)
Gateway
-
Cisco Unified Videoconferencing 3515 Multipoint Control Unit
(MCU)
Vulnerable Products
All versions of system software prior to the first fixed, which is indicated in the Software Version and Fixes Table, are affected.
To view the version of system software that is currently running on Cisco Unified Videoconferencing 5100 Series Products, access the Cisco UVC device via the web GUI interface. On the status screen, the "Software Version" field below the "Product Information" section indicates the current system software.
To exploit any of these vulnerabilities, a remote user must authenticate to the administrative interface or to the system via FTP, Telnet, or SSH.
Products Confirmed Not Vulnerable
No other Cisco products are currently known to be affected by these vulnerabilities.
-
Cisco Unified Videoconferencing 5110 System
-
The following vulnerabilities have been reported against the Cisco UVC devices:
-
Hard-Coded Credentials in Cisco UVC Products
The Linux shadow password file contains three hard-coded usernames and passwords. The passwords cannot be changed, and the accounts cannot be deleted. Attackers could leverage these accounts to obtain remote access to a device by using permitted remote access protocols.
This vulnerability only affects Linux-based operating system Cisco UVC products.
This vulnerability is documented in Cisco bug ID CSCti54008 ( registered customers only) and has been assigned CVE ID CVE-2010-3038.
-
Remote Command Injection on the Web Interface in Cisco UVC
Products
Several fields in the web server interface of Cisco UVC products are vulnerable to a shell command injection vulnerability. An administrator user who is authenticated to the web interface of Cisco UVC products could exploit this vulnerability to execute root-level commands on the Linux operating system. Exploitation of this vulnerability could result in a complete compromise of the device.
This vulnerability affects Linux-based operating system Cisco UVC products. It may also affect VxWorks-based Cisco UVC products.
This vulnerability is documented in Cisco bug ID CSCti54059 ( registered customers only) and has been assigned CVE ID CVE-2010-3037.
The following security vulnerabilities which were reported against the Cisco UVC devices, have been classified as security best practices or service misconfiguration issues and as such have not been assigned CVE identifiers.
-
Weak Obfuscation of Credentials in Cisco UVC
Products
An attacker who can obtain access to the Linux operating system could retrieve a file that is used to store the administrator and operator accounts of the Cisco UVC web GUI. The passwords in this file are obfuscated using an easily reversible hashing scheme. Exploit code that assists in recovering the passwords exists.
This vulnerability affects only Linux-based operating system Cisco UVC products.
This issue is documented in Cisco bug ID CSCti54010 ( registered customers only) .
-
FTP Server Accessible by Default in Cisco UVC
Products
The FTP server is enabled by default on Cisco UVC systems. An attacker can leverage the FTP server to exploit other vulnerabilities in this Cisco Security Response. Authentication is required to log into the device via the FTP server.
FTP access to the device can be controlled via the "Security mode" field of the Cisco UVC product's web GUI. If the Security setting is configured as "High" or "Maximum," the device will not accept FTP connections. For further information, consult the Configuration Guide for Cisco Unified Videoconferencing 5000 MCU Release 7.0 at the following link: http://www.cisco.com/en/US/docs/video/cuvc/7_0/configuration_guide/setup.html#wp1690479
This service misconfiguration affects both Linux-based operating system Cisco UVC products and VxWorks-based Cisco UVC products.
This issue is documented in Cisco bug ID CSCti72032 ( registered customers only) .
-
Shadow Password File has Read Permissions for All Users in
Cisco UVC Products
The shadow password file should only be readable by the root account. Allowing read access to the shadow password file allows other users of the system with shell access to retrieve the shadow password file. An authenticated user who has access to the Linux operating system directories, may be able to retrieve the shadow password file.
This service misconfiguration only affects Linux-based operating system Cisco UVC products.
This issue is documented in Cisco bug ID CSCti54043 ( registered customers only) .
-
Lock Down OpenSSH Configuration in Cisco UVC
Products
The SSH server has a restricted shell, however the configuration of the SSH server allows for X.11 forwarding and socks proxies to be created.
This service misconfiguration affects only Linux-based operating system Cisco UVC products.
This issue is documented in Cisco bug ID CSCti54045 ( registered customers only) .
-
Daemon That Binds the Port of the Web Interface Runs as root
in Cisco UVC Products
If attackers exploit a flaw in a script that runs with root permissions, the attacker could gain write access to files, access the system, or cause a denial of service.
This service misconfiguration affects only Linux-based operating system Cisco UVC products.
This issue is documented in Cisco bug ID CSCti54047 ( registered customers only) .
-
Weak Session IDs on the Web Interface in Cisco UVC
Products
The Cisco UVC web interface has session IDs that are incremented based on a time counter. Having predictable session IDs, assists in the hijacking of user sessions.
This vulnerability affects both Linux-based operating system Cisco UVC products and VxWorks-based Cisco UVC products.
This issue is documented in Cisco bug ID CSCti54048 ( registered customers only) .
-
Usage of Cookies to Store Credentials in Cisco UVC
Products
On Linux-based Cisco UVC products, web interface credentials are stored in Base64 format in the cookie that is sent to a browser. On VxWorks-based Cisco UVC products, web interface credentials are stored in Base64 format or in clear text.
This vulnerability affects both Linux-based operating system Cisco UVC products and VxWorks-based Cisco UVC products.
This issue is documented in Cisco bug ID CSCti54052 ( registered customers only) .
-
Hard-Coded Credentials in Cisco UVC Products
-
Administrators can mitigate these vulnerabilities by limiting access to Cisco UVC web server to only trusted hosts. This could be achieved by infrastructure access control lists (iACL) on routers or switches that the Cisco UVC is connected to.
To disable FTP, SSH, and Telnet services, change the configuration setting "Security mode" field in the "Security" section of the Cisco UVC web GUI to "Maximum." For further information, consult the Configuration Guide for Cisco Unified Videoconferencing 5000 MCU Release 7.0 at the following link: http://www.cisco.com/en/US/docs/video/cuvc/7_0/configuration_guide/setup.html#wp1690479
-
When considering software upgrades, also consult http://www.cisco.com/go/psirt and any subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco Technical Assistance Center (TAC) or your contracted maintenance provider for assistance.
All Cisco UVC software versions prior to the first fixed software release, which is indicated in the following table, are affected by the associated vulnerabilities.
Cisco Bug ID
Cisco UVC Products
Cisco 5110, 5115
Cisco 5230
Cisco 3515, 3545
Cisco 3522, 3527
Linux OS
VxWorks OS
VxWorks OS
VxWorks OS
CSCti54008
7.1.2.15.
Not Affected.
Not Affected.
Not Affected.
CSCti54059
7.1.2.15.
7.1.2.15.
5.7.2.
5.7.2.
CSCti54010
7.1.2.15.
7.1.2.15.
5.7.2.
5.7.2.
CSCti72032
7.1.2.15.
7.1.2.15.
5.7.2.
5.7.2.
CSCti54043
7.1.2.15.
Not Affected.
Not Affected.
Not Affected.
CSCti54045
7.1.2.15.
Not Affected.
Not Affected.
Not Affected.
CSCti54047
This is a design architecture of the product. Version 7.1.2.15 removes known vulnerabilities that allowed access to the underlying operating system via the web GUI.
Not Affected.
Not Affected.
Not Affected.
CSCti54048
7.1.2.15.
7.1.2.15.
5.7.2.
5.7.2.
CSCti54052
7.1.2.15.
7.1.2.15.
5.7.2.
Not Affected.
Note: Once a fixed version of software has been installed on the affected device to active the above fixes the following configuration steps must be undertaken (This process is network disruptive and the device will reload during activation of the advanced security parameters):
Log into the device after upgrading the software and enter the "Advanced Parameters" configuration section of the web GUI. In the "CLI" section of the page enter in the "command" field strongsecuritymode and in the "Parameter" field Enable . The "Value" field remains empty. Click the execute button on the screen. The device will now reload and reconfigure based on the advanced security settings. Once the device reloads, access the device via HTTPS rather than HTTP.
Currently fixed software can be obtained by contacting your maintenance provider. This section will be updated with the links on Cisco.com to download the system software once the software is published to Cisco.com.
-
The Cisco PSIRT is not aware of any malicious use of the vulnerabilities described in this advisory.
The original report of these vulnerabilities is available at the following links: http://seclists.org/fulldisclosure/2010/Nov/167
and
http://www.trustmatta.com/advisories/MATTA-2010-001.txt
This vulnerability was reported to Cisco by Florent Daigniere of Matta Consulting.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Revision 1.1
2010-December-06
Updated Software information, added CVSS Scores and moved the original security response to a Cisco Security Advisory
Revision 1.0
2010-November-17
Initially published as a Cisco Security Response
Show Less
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A stand-alone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy, and may lack important information or contain factual errors. The information in this document is intended for end-users of Cisco products.