Cisco Security Advisory-
While fixing vulnerabilities mentioned in the Cisco Security Advisory: Multiple SSH Vulnerabilities (https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20010627-ssh) we inadvertently introduced an instability in some products. When an attacker tries to exploit the vulnerability VU#945216 (described in the CERT/CC Vulnerability Note at http://www.kb.cert.org/vuls/id/945216) the SSH module will consume too much of the processor's time, effectively causing a DoS. In some cases the device will reboot. In order to be exposed SSH must be enabled on the device.
Affected product lines are:
-
All devices running Cisco IOS® Software supporting SSH. This includes
routers and switches running Cisco IOS Software.
-
Catalyst 6000 switches running CatOS.
-
Cisco PIX Firewall.
-
Cisco 11000 Content Service Switch
family.
No other Cisco product is vulnerable. It is possible to mitigate this vulnerability by preventing, or having control over, the SSH traffic.
This advisory is available at https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20020627-ssh-scan.
-
All devices running Cisco IOS® Software supporting SSH. This includes
routers and switches running Cisco IOS Software.
-
This section provides details on affected products.
Vulnerable Products
These products are vulnerable:
-
All devices running Cisco IOS Software supporting SSH. This includes
routers and switches running Cisco IOS Software.
-
Catalyst 6000 switches running CatOS.
-
Cisco PIX Firewall.
-
Cisco 11000 Content Service Switch family.
Product Category
Vulnerability ID
IOS
CSCdw33027
PIX
CSCdw29965
VPN 3000
Not affected
Catalyst 6000
CSCdv85279 and CSCdw59394
CSS 11000
CSCdx59197
All software releases listed in the https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20010627-ssh (Cisco Security Advisory: Multiple SSH Vulnerabilities), including all subsequent software releases that contain the patches addressed by that advisory are vulnerable.
Products Confirmed Not Vulnerable
All software that does not contain fixes for the issues listed in the previous SSH advisory are not vulnerable to the issue described in this advisory. However, falling back to a previous software release will leave you exposed to the vulnerabilities described in the previous advisory and you will lose any additional features or functionalities introduced in the newer releases.
No other Cisco products are currently known to be affected by these vulnerabilities.
-
All devices running Cisco IOS Software supporting SSH. This includes
routers and switches running Cisco IOS Software.
-
While fixing the vulnerabilities listed in https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20010627-ssh (Cisco Security Advisory: Multiple SSH Vulnerabilities) an instability is introduced in some products. When exposed to an overly large packet, the SSH process will consume a large portion of the processor's instruction cycles, effectively causing a DoS. The capability to create such a packet is available in publicly available exploit code. In some cases this availability attack may result in a reboot of the device. In order to be exposed SSH must be enabled on the device.
The vulnerability in question is named CRC-32 Check in the https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20010627-ssh. It is also marked as VU#945216 and described in the CERT/CC Vulnerability Note at http://www.kb.cert.org/vuls/id/945216.
-
It is possible to mitigate this vulnerability in two ways:
-
Block all SSH connections on the border on your network,
or
-
On each individual device allow SSH connections only from the
required IP addresses and block all others.
Blocking all SSH connections, and all other protocols that are not supposed to come from the outside, on the network edge should be an integral part of the network security best practice.
-
Block all SSH connections on the border on your network,
or
-
For CSS 11000 family, the vulnerability is fixed in the following software releases.
WebNS
R5.00.045 or later (available now) 5.10.1.01 available July 2002
For Catalyst 6000 switches, the vulnerability is fixed in the following CatOS releases. This table lists the first fixed release.
CatOS
6.3(3.6), 7.1(0.94), 7.2(0.14)PEN
Each row of the table describes a release train and the platforms or products for which it is intended. If a given release train is vulnerable, then the earliest possible releases that contain the fix and the anticipated date of availability for each are listed in the "Rebuild", "Interim", and "Maintenance" columns. A device running any release in the given train that is earlier than the release in a specific column (less than the earliest fixed release) is known to be vulnerable, and it should be upgraded at least to the indicated release or a later version (greater than the earliest fixed release label). When selecting a release, keep in mind the following definitions:
-
Maintenance
Most heavily tested and highly recommended release of any label in a given row of the table.
-
Rebuild
Constructed from the previous maintenance or major release in the same train, it contains the fix for a specific defect. Although it receives less testing, it contains only the minimal changes necessary to effect the repair.
-
Interim
Built at regular intervals between maintenance releases and receives less testing. Interims should be selected only if there is no other suitable release that addresses the vulnerability. Interim images should be upgraded to the next available maintenance release as soon as possible. Interim releases are not available through manufacturing, and usually they are not available for customer download from CCO without prior arrangement with the Cisco Technical Assistance Center (TAC).
In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco TAC for assistance as shown in the following section.
More information on Cisco IOS software release names and abbreviations is available at http://www.cisco.com/warp/public/620/1.html.
For PIX Firewall software, use the following table to determine affected and fixed software releases.
Train
Description of Image or Platform
Availability of Fixed Releases*
5.x-based Releases
Rebuild
Interim**
Maintenance
5.2
General Deployment (GD) for Classic, 10000, 506, 506E, 510, 515, 515E, 520 and 525
5.2(6)202 Available through TAC
5.2(7)
5.3
Early Deployment (ED) for Classic, 10000, 506, 506E, 510, 515, 515E, 520, 525 and 535
5.3(2)205 Available through TAC
5.3(3)
6.x-based Releases
Rebuild
Interim**
Maintenance
6.0
Early Deployment (ED) for 501, 506, 506E, 515, 515E, 520, 525 and 535
6.0(1)106 Available through TAC
6.0(2)
6.1
Early Deployment (ED) for 501, 506, 506E, 515, 515E, 520, 525 and 535
6.1(1)105 Available through TAC
6.1(2)
6.2
Early Deployment (ED) for 501, 506, 506E, 515, 515E, 520, 525 and 535
6.2(0)222 Available through TAC
6.2(1)
For Cisco IOS software, use the following table to determine affected and fixed software releases. This table always lists the first fixed release, which is not necessarily the recommended release for your particular environment.
Train
Description of Image or Platform
Availability of Fixed Releases*
12.0-based Releases
Rebuild
Interim**
Maintenance
12.0S
Core/ISP support: GSR, RSP, c7200
12.0(17)S4
12.0(20.4)S
12.0(21)S
12.0SP
Core/ISP support: GSR, RSP, c7200
12.0(20)SP2
12.0(20.4)SP
12.0ST
Core/ISP support: GSR, RSP, c7200
12.0(17)ST5
12.0(20.3)ST2
12.0(21)S
12.0XB
Early Deployment Release
Not Scheduled
Migrate to 12.1(1)T or later
12.0XM
Early Deployment Release
Not Scheduled
Migrate to 12.1(3)T or later
12.0XV
Early Deployment Release
Not Scheduled
Migrate to 12.1(2)T or later
12.1-based Releases
Rebuild
Interim**
Maintenance
12.1
General deployment release for all platforms
SSH not supported
12.1E
Core/ISP support: GSR, RSP, c7200, Catalyst 6000
12.1(8b)E8
12.1(10.5)E
12.1(11b)E
12.1EC
Early Deployment Release
12.1(10.5)EC
12.1(12c)EC
12.1(1)EX
Early Deployment Release
Not Scheduled
Migrate to 12.1(3)T or later
12.1(5c)EX
Catalyst 6000 support
Not Scheduled
Migrate to 12.1(6)EX or later
12.1(8a)EX
12.1E based XED
Not Scheduled
Migrate to 12.1(11)E or later
12.1(9)EX
Early Deployment Release
Not Scheduled
Migrate to 12.1(10)EX or later
12.1T
Early Deployment(ED): VPN, Distributed Director, various platforms
Not Scheduled
Migrate to 12.2 or later
12.1XB
Early Deployment Release
Not Scheduled
Migrate to 12.1(5)YB or later
12.1XC
Early Deployment (ED): limited platforms
Not Scheduled
Migrate to 12.2 or later
12.1XF
Early Deployment (ED): 811 and 813 (c800 images)
12.1(2)XF6 Release date to be determined
Not planned, migrate to 12.1(5)T or later
12.1XG
Early Deployment (ED): 800, 805, 820, and 1600
12.1(3)XG7 Release date to be determined
Not planned, migrate to 12.2(1)T or later
12.1XH
Early Deployment (ED): limited platforms
Not Scheduled
Migrate to 12.2 or later
12.1XI
Early Deployment (ED): limited platforms
Not Scheduled
Migrate to 12.2 or later
12.1XJ
Early Deployment (ED): limited platforms
Not Scheduled
Migrate to 12.2(2)T or later
12.1XL
Early Deployment (ED): limited platforms
Not Scheduled
Migrate to 12.2 or later
12.1XM
Short-lived early deployment release
12.1(5)XM7
Not planned, migrate to 12.2(1)T or later
12.1XP
Short-lived early deployment release
Not Scheduled
Migrate to 12.2(2)T or later
12.1XQ
Short-lived early deployment release
Not Scheduled
Migrate to 12.2(2)XB or later
12.1XT
Early Deployment (ED): 1700 series
Not Scheduled
Migrate to 12.2(2)T or later
12.1XU
Early Deployment (ED): limited platforms
Not Scheduled
Migrate to 12.2T or later
12.1YB
Short-lived early deployment release
12.1(5)YB6 Release date to be determined
Not planned, migrate to 12.2(2)T or later
12.1YC
Short-lived early deployment release
12.1(5)YC3 Release date to be determined
Not planned, migrate to 12.2(4)T or later
12.1YD
Short-lived early deployment release
Not Scheduled
Migrate to 12.2(8)T or later
12.1YE
Short-lived early deployment release
Not Scheduled
Migrate to 12.1(5)YI or later
12.1YF
Short-lived early deployment release
Not Scheduled
Migrate to 12.2(2)XN or later
12.1YI
Short-lived early deployment release
Not Scheduled
Migrate to 12.2(2)YC or later
12.2-based Releases
Rebuild
Interim**
Maintenance
12.2
General deployment release for all platforms
12.2(6b)
12.2(7.4)
12.2(7)
12.2B
Early Deployment Broadband Release
12.2(4)B3
12.2(7.6)B
12.2BC
Early Deployment Broadband Release uBR7000 and uBR10000
12.2(8)BC1
12.2DA
Early Deployment Release: xDSL
12.2(6.8a)DA
12.2(7)DA
12.2DD
Specific Technology Early Deployment release for 7200 and 7400
Not Scheduled
Migrate to 12.2(4)B1 or later
12.2S
SPLOB
12.2(7.4)S
12.2T
General deployment release for all platforms
12.2(7.4)T
12.2(8)T
12.2XA
Early Deployment Release
Not Scheduled
Migrate to 12.2(4)T or 12.2(2)XB
12.2XB
Early Deployment Release
12.2(2)XB4 Available 2002-July
12.2XD
ICS7750, 820, soho70
12.2(1)XD4
Not planned, migrate to 12.2(8)T or later
12.2XE
806, 820, soho78
12.2(1)XE3
Not planned, migrate to 12.2(8)T or later
12.2XF
DOCSYS support, uBR7100, uBR7200, uBR10000
Not Scheduled
Migrate to 12.2(4)BC1
12.2XG
IAD2400/2600/3600
Not Scheduled
Migrate to 12.2(8)T
12.2XH
1700, 800, 820, soho70
12.2(2)XH3
Not planned, migrate to 12.2(8)T
12.2XI
Early Deployment Release 820/SOHO
12.2(2)XI2
Not planned, migrate to 12.2(12)T
12.2XJ
1700
Not Scheduled
Migrate to 12.2(4)YB
12.2XK
Early Deployment Release 820/SOHO
12.2(2)XK3
Not planned, migrate to 12.2(12)T
12.2XL
1700, 820, 800, SOHO70
12.2(4)XL5 Available 2002-June
Not planned, migrate to 12.2(12)T
12.2XM
Early Deployment Release
12.2(4)XM4
12.2XN
Early Deployment Release for enhanced MGCP support, selected platforms
Not Scheduled
Upgrade recommended to a release yet to be determined
12.2XQ
1720, 1750, 1752
Not Scheduled
Migrate to 12.2(4)YB or later
12.2XR
Short-lived early deployment release
Not Scheduled
Migrate to 12.2(4)XR or later
12.2XS
Short-lived early deployment release
Not Scheduled
Migrate to 12.2(6) or later
12.2XT
Short-lived early deployment release
Not Scheduled
Migrate to 12.2(8)T or later
12.2XW
Short-lived early deployment release
Not Scheduled
Migrate to 12.2(4)YB or later
12.2YA
Early Deployment Release
12.2(4)YA2
12.2YB
Short-lived early deployment release
Not Scheduled
Upgrade recommended to yet to be determined release
12.2YC
Short-lived early deployment release
Not Scheduled
Migrate to 12.2(13)T or later
12.2YD
Broadband suport for 7200
Not Scheduled
Migrate to 12.2(8)B or later
12.2YF
Short-lived early deployment release
Not Scheduled
Upgrade recommended to yet to be determined release
12.2YG
Early Deployment Release
12.2(4)YG
12.2YH
1700, 8xx, soho7x, ICS7700
12.2(4)YH
Notes
* All dates are estimates and subject to change.
** Interim releases are subjected to less rigorous testing than regular maintenance releases, and may have serious bugs.
-
Maintenance
-
Publicly available malicious software is known to trigger this defect. Scanning for Unix hosts running vulnerable versions of SSH has been prevalent and such a scan may trigger this vulnerability.
Cisco PSIRT is aware of a few customers who experienced problems related to this vulnerability, however we do not have any evidence that these devices were targeted directly.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A stand-alone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy, and may lack important information or contain factual errors. The information in this document is intended for end-users of Cisco products.