Guest

Cisco Small Business IP Phones

Rebooting the SPA941

Document ID: 108801

Updated: Dec 12, 2008

   Print

Contents

Introduction
How do I reset the IP phone to factory default?
Related Information

Introduction


This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

Q. How do I reset the IP phone to the factory default?

A.

Rebooting the SPA941

In order to reset the SPA941 to the factory default, complete these steps:

Step 1:
Press the Setup on the SPA941.

Step 2:
Using Navigation select Factory Reset (12).

Step 3:
Press OK soft key afterwards.

Step 4:
SPA will reboot and will be back to its default settings.

Related Information

Updated: Dec 12, 2008
Document ID: 108801