Setting up the SPA922 initially
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).
Q. How do I setup the SPA922?
Connect the WAN port of the SPA922 to your network (router, switch or hub). Make sure that you have a DHCP server so that the SPA922 will get the IP address.
Click here to register the SPA922 to a VoIP provider.
Was this Document Helpful?
This Document Applies to These Products
© 2016 Cisco and/or its affiliates. All rights reserved.