Guest

Cisco Small Business IP Phones

Power issues on the SPA901

Document ID: 109223

Updated: Dec 12, 2008

   Print

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Q. What are the power requirements for the SPA-901 to function well?

A.

For the SPA-901 to function well, make sure the following power requirements are met:

Switching Type (100-240v) Automatic
DC Input Voltage: +5 Volts DC at 2.0 Amps Maximum
Power Consumption: 5 Watts
Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord

Note: Ensure that your power adapters are plugged securely to the power port of the SPA-901 and are conforming to these specifications to eliminate possible power problems.

Related Information

Updated: Dec 12, 2008
Document ID: 109223