Guest

Cisco Small Business IP Phones

Encountering Problems Retrieving the Contact List Using the Cordless Internet Telephony Kit

Document ID: 108708

Updated: Dec 12, 2008

   Print

Contents

Introduction
I am encountering difficulties retrieving the contact list using the CIT400.
Related Information

Introduction


This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Q. I am encountering difficulties retrieving the contact list using the CIT400.

A.

Getting Unavailable when checking the contacts list can be because the Base Station is disconnected from the Line or Ethernet connection or another user may be using the contact list or Skype menu.

To resolve this, follow the instructions below.

Step 1:
Check the connection between the Base Station and the telephone line or the network Ethernet cable.

Or

Step 2:
Make sure the Handset and the Base Station are connected. Press the PAGE button on the Base Station to check if it is connected to the Handset. The Handset will ring to acknowledge the page.

Step 3:
The contacts list will be inaccessible if another user is using the contact list or Skype menu. Try accessing the contact list later.

Related Information

Updated: Dec 12, 2008
Document ID: 108708