Guest

Cisco Small Business IP Phones

Encountering Difficulties when the Screen Display Doesn't Appear After Powering On the Cordless Internet Telephony Kit

Document ID: 108707

Updated: Dec 12, 2008

   Print

Contents

Introduction
What can I do if I'm not seeing anything on the display screen upon powering on the wireless IP phone?
Related Information

Introduction


This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Q. What can I do if I'm not seeing anything on the display screen upon powering on the wireless IP phone?

A.

If the screen display on the wireless IP phone is not showing anything, it is due to batteries that are not properly placed or devices that are not properly connected together. To resolve this, follow the steps below.

Step 1:
Ensure that the batteries are properly placed in the battery compartment.

Step 2:
Make sure you have properly connected the handset, charger, and the base station together.

Step 3:
Place the handset on the charger to recharge the batteries.

 

 

Related Information

Updated: Dec 12, 2008
Document ID: 108707