Tidal Enterprise Orchestrator: Install Databases Manually

Available Languages

Updated:June 15, 2011
Document ID:113043

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

The standard installer for Tidal Enterprise Orchestrator (TEO) installs the required databases for use with TEO. Users may need to install their databases for Tidal Enterprise Orchestrator separately from the standard installation.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

  • Tidal Enterprise Orchestrator 2.1 or later

Components Used

The information in this document is based on the Tidal Enterprise Orchestrator 2.1 or later.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Solution

Complete these steps in order to install the required databases:

  1. For either the Process Database or Reporting Database, in the install media, choose DatabaseScripts > MSSQL, and run the database script in the \DatabaseScripts\MSSQL folder. There is a TEOProcess.sql and a TEOReporting.sql script.

  2. These scripts should be run with a system administrator account in order to create the databases and the required tables

  3. After the database and tables are created, run the TEO installer and when prompted, point to the proper database server.

  4. The installer detects that you already have a database and prompts you to use the current database. Choose Yes for both databases and proceed with the installation.

  5. Refer to Tidal Enterprise Orchestrator: Manually Create a TEO Report Database for more information on the Reporting Database.

Related Information

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products