Introduction
This document describes how to check the deployment type in Prime Collaboration Assurance (PCA).
How to check the deployment type in PCA?
PCA has four deployment types, namely:
- Small
- Medium
- Large
- Very Large
Sometimes as a part of deployment, you need to know the deployment type in order to narrow down to the root cause or other known issues.
This can be identified with the help of this configuration file.
- Log in to PCA from CLI via Secure Shell (SSH) with port 26.
- Log in as admin user and then change to root user.
- Type more /opt/emms/emsam/conf/emsam.properties to find the deployment type as shown in this image: