This document provides the procedure to change the port used by Cisco
IP/TV's Content Manager Java web server.
For more information on document conventions, see the
Cisco Technical Tips
There are no specific prerequisites for this document.
This document is not restricted to specific software and hardware
The information presented in this document was created from devices in
a specific lab environment. All of the devices used in this document started
with a cleared (default) configuration. If you are working in a live network,
ensure that you understand the potential impact of any command before using
Perform the steps below to change the Cisco IP/TV Content Manager Java
web server port.
In your web browser, enter the following location:
http://<IP address or hostname of Content Manager>:9090
For example, http://192.0.2.10:9090.
Log in with the following user ID and password:
User ID: admin
Select Web Service in the Content
Manager window, and click the Manage
Select Network in the Content
Manager window. Change the port number field from 80
to the new port number. Click the Restart
Note: After you complete these procedures, make sure you change all the
IP/TV clients and servers to communicate with the Content Manager on the new
port number, instead of port 80.