Guest

Cisco IP/TV Software

Changing the Cisco IP/TV Content Manager Java Web Server Port

Cisco - Changing the Cisco IP/TV Content Manager Java Web Server Port

Document ID: 12543

Updated: Sep 08, 2006

   Print

Introduction

This document provides the procedure to change the port used by Cisco IP/TV's Content Manager Java web server.

Before You Begin

Conventions

For more information on document conventions, see the Cisco Technical Tips Conventions.

Prerequisites

There are no specific prerequisites for this document.

Components Used

This document is not restricted to specific software and hardware versions.

The information presented in this document was created from devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If you are working in a live network, ensure that you understand the potential impact of any command before using it.

Step-by-Step Instructions

Perform the steps below to change the Cisco IP/TV Content Manager Java web server port.

  1. In your web browser, enter the following location:

    http://<IP address or hostname of Content Manager>:9090

    For example, http://192.0.2.10:9090.

  2. Log in with the following user ID and password:

    • User ID: admin

    • Password: admin

  3. Select Web Service in the Content Manager window, and click the Manage button.

    33a.gif

  4. Select Network in the Content Manager window. Change the port number field from 80 to the new port number. Click the Restart button.

    33b.gif

Note: After you complete these procedures, make sure you change all the IP/TV clients and servers to communicate with the Content Manager on the new port number, instead of port 80.

Related Information

Updated: Sep 08, 2006
Document ID: 12543