Guest

Cisco Small Business Wireless Access Points

Cisco WET200 Wireless-G Business Ethernet Bridge Cisco Small Business Access Points

  • Viewing Options

  • PDF (152.6 KB)
  • Feedback

High-Speed Wireless Bridging for Small Businesses with Multiple Locations

Highlights

• Securely connects separate wired networks spanning different locations

• Connects to Power over Ethernet devices, simplifying installation and eliminating the need for and cost of installing external power supplies

• Protects business information with enhanced security and advanced encryption

Figure 1. Cisco WET200 Wireless-G Business Ethernet Bridge

C:\Documents and Settings\agoldsmi\My Documents\December Launch - EVIA\AP 541N\Images (Rebranded)\WET200.jpg

Product Overview

The Cisco ® WET200 Wireless-G Business Ethernet Bridge (Figure 1) transparently bridges separate Ethernet networks together wirelessly and is ideal for small businesses with offices and resources that are in different office suites of a building or in closely adjacent buildings. The WET200 is a Power over Ethernet (PoE) end device, so it can be installed anywhere an Ethernet cable can be run if there is no ready access to a power outlet. PoE enables delivery of both data and power to the Cisco WET200. An AC adapter is also included for use if the device installation site has a power outlet nearby.
Advanced security features include Wi-Fi Protected Access (WPA2) with up to 256-bit Advanced Encryption Standard (AES) encryption using Extensible Authentication Protocol (EAP), giving small businesses the protection they need to communicate and transfer data securely. The integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video applications.
Additional support for VLANs, Simple Network Management Protocol (SNMP), Spanning Tree Protocol, and port mirroring make this an ideal solution for network administrators to incorporate into larger organizations.

Features

• 5-port 10/100 BASE-T Ethernet managed switch, autosensing half/full duplex and medium dependent interface (MDI) and MDI crossover (MDI-X)

• Supports 802.11b and 802.11g wireless connection to access point

• Easy installation and configuration via a web interface

• Supports Wired Equivalent Privacy (WEP), WPA Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, and WPA2-ENT wireless encryption

• SMA detachable dipole antennas with 1x2 multiple-input, multiple-output (MIMO) to increase coverage

• Supports PoE or external DC power

• Supports SNMP and features an intuitive web-based interface

• Support 802.1Q and port-based VLAN on LAN switch - 1 VLAN bridged over wireless

• Support 802.1p, IP type of service (ToS), and differentiated services code point (DSCP) based QoS on LAN switch

• Supports rate limiting on both wired switch and wireless interface

• Supports Spanning Tree Protocol, port mirroring, and MAC-based access control lists (ACLs)

• Limited lifetime warranty

Specifications

Table 1 lists the specifications, package contents, and minimum requirements for the Cisco WET200 Wireless-G Business Ethernet Bridge.

Table 1. Specifications for the Cisco WET200 Wireless-G Business Ethernet Bridge

Specifications

Standards

IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1p (QoS priority), 802.1Q (VLAN), 802.1X (security authentication), 802.11i ready (security WPA2)

Ports

Five 10/100 BASE-T Ethernet, 12V DC power

Buttons

Reset

Cabling type

Unshielded twisted pair (UTP) Category 5

LEDs

Power, PoE, Wireless, Ethernet 1-5

Operating system

Linux

Setup/Config

Web user interface

Built in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management

SNMP version

SNMP version 1, 2c, 3

Web firmware upgrade

Firmware upgradable through web browser

Dynamic Host Configuration Protocol (DHCP)

DHCP client

Operating Modes

Wireless client

Infrastructure or ad hoc

Wireless

Spec/modulation

Radio and modulation type: 802.11b/DSSS, 11g/OFDM

Channels

Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)

Internal antennas

None

External antennas

2 (omnidirectional) SMA detachable

Transmit power

Transmit power (adjustable) at normal temperature range: 802.11b: 12 ± 1 dBm; 802.11g: 16 ± 1 dBm

Antenna gain in dBi

2

Receiver sensitivity

11g: 54 Mbps at -69 dBm, 11b: 11 Mbps at -82 dBm

Security

WEP/WPA/WPA2

WEP 64-bit/128-bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT

Access control

MAC-based ACL between wired and wireless interfaces

802.1X

IEEE 802.1X support

Quality of Service

QoS

• 4 queues
• Queue mapping on ingress based on default priority, 802.1p tag, DSCP, and IP ToS
• Rate limiting on both ingress and egress direction
• Wi-Fi Multimedia (WMM) priority settings for wireless egress

General

• 16 VLAN groups
• 256 MAC address entries across wireless bridge
• 1024 MAC address entries in the switch

Environmental

Dimensions
W x H x D

6.69 x 8.07 x 7.68 in.
(170 x 205 x 195 mm)

Weight

12.17 oz (345 g)

Power

12V 0.5A DC input and IEEE 802.3af-compliant PoE

Maximum power draw: 4.2W

Certification

FCC, ICES-003, CE

Operating temperature

32º to 104ºF (0º to 40ºC)

Storage temperature

-4º to 158ºF (-20º to 70ºC)

Operating humidity

10% to 85% noncondensing

Storage humidity

5% to 90% noncondensing

Package Contents

• Cisco WET200 Wireless-G Business Ethernet Bridge
• 2 SMA detachable dipole antennas
• User guide on CD-ROM
• Quick installation guide
• Ethernet network cable
• Power adapter
• Product stands
• Registration card

Minimum Requirements

• PC or devices with Ethernet port
• 802.11b or 802.11g wireless access point
• Switch/router with PoE support or PoE injector when used with PoE
• Web-based configuration: Java-enabled web browser

Product Warranty

Limited lifetime hardware warranty with return to factory replacement.

Cisco Limited Lifetime Warranty for Cisco Small Business Products

This Cisco Small Business product comes with a limited lifetime hardware warranty with return to factory replacement and a 1-year limited warranty for fans and/or power supplies. In addition, Cisco offers telephone technical support at no charge for the first 12 months following the date of purchase and software bug fixes, as available, for the warranty term. To download software updates, go to: www.cisco.com/cisco/web/download/index.html.
Product warranty terms and other information applicable to Cisco products are available at www.cisco.com/go/warranty.

For More Information

For more information on Cisco Small Business products and solutions, visit: http://www.cisco.com/smallbusiness.