Guest

Cisco Packet Data Serving Node

PDSN/ Home Agent R2.0 Product Bulletin; 12.3(8)XW Release

  • Viewing Options

  • PDF (137.8 KB)
  • Feedback
PRODUCT BULLETIN NO. 2703

INTRODUCTION

This Product Bulletin describes the content and delivery information concerning Cisco IOS software release 12.3(8)XW, the release vehicle for the Packet Data Serving Node Release 2.0, and migration vehicle for the Cisco IOS software release 12.3(7)XJ, the initial release vehicle for Mobile Wireless Home Agent 2.0. This release is focused on the Cisco 7206VXR, 7600, and Catalyst 6500 platforms. The 7600 and 6500 utilizes the Multi-Processor WAN Application Module (MWAM). The features delivered with this release will be incorporated into the 12.4(1st)T release, but 12.3(8)XW represents a release vehicle that provides these features sooner. For more information about the Cisco IOS software release process, please see Product Bulletin #537.

MIGRATION GUIDE

Figure 1 below displays Cisco IOS 12.3(8)XW release functionality relative to the 12.3 and 12.3T releases. This diagram also identifies the migration path.

Figure 1. Cisco IOS Release 12.3(8)XW Migration Guide

This is also the migration path for the previous Early Deployment release 12.3(7)XJ.

FEATURES IN CISCO IOS RELEASE 12.3(8)XW

Cisco IOS Release 12.3(8)XW New Features (PDSN)

The following new features will be delivered in the initial release of 12.3(8)XW.

Table 1. Cisco IOS Release 12.3(8)XW New Features (PDSN)

New Feature

7206VXR

6500 (MWAM)

7600 (MWAM)

On-Demand Address Pools (ODAP)

-
X
X

Prepaid (IS-835C)

X
X
X

Resource Revocation (IS-835C)

X
X
X

Packet of Disconnect (IS-835C)

X
X
X

Always On (IS-835B)

X
X
X

Please see the next section for documents that address details on these new features. Any ED release of software should be utilized first in a test network before being deployed in a production network.

Detailed Information

On-Demand Address Pools (ODAP)

Cisco On Demand Address Pool (ODAP) feature supports the capability of a large IP address pool per chassis. Each separate PDSN processor will request a subnet of IP addresses from the large IP address pool. Local pools per member would not need to be configured at all; one main pool would be configured on a Centralized Server. The benefits include more efficient use of IP addresses, centralized management benefits, and simplified operational procedures.

Prepaid Per IS-835C

The Prepaid feature provides PDSN to AAA server support of the prepaid VSAs, as defined in Is-835C. It provides real time metering of Simple IP, Proxy Mobile IP and VPDN based services. It also provides undifferentiated real time metering of Mobile IP services. "Undifferentiated" means that all the Mobile IP flows for a single user will be rated equally. Metering can be based on data volume or call duration. Note that the AAA server must support the defined VSAs, and be integrated with a Prepaid Billing Server (PBS).

Resource Revocation Per IS-835C

This allows the PDSN to clean up an HA binding (e.g. when call drops) as well as allows HA to clean up a PDSN session, e.g. on handoff. This is the implementation of the standardization of Cisco binding update feature available in HA R1.2 with an additional enhancement.

Packet of Disconnect (PoD) Per IS-835C

This provides a trigger mechanism to cancel sessions on the PDSN and/or HA. The trigger can come from AAA, billing mediation, etc. (whoever is controlling the access). It can be used alone, or in conjunction with Resource Revocation feature, to clean up the session/binding. This means that resources are not wasted.

Always on Per IS-835B

The always-on service maintains a subscriber's packet data session irrespective of ppp inactivity timer value for the user. At the same time, by making use of a finite ppp inactivity timer value, this feature provides a compromised approach to keep a session only as long as the user is reachable.

CISCO IOS RELEASE 12.3(7)XJ FEATURES (HA)

The following features were initially delivered in 12.3(7)XJ and will be maintained in the initial release of 12.3(8)XW.

Table 2. Cisco IOS Release 12.3(7)XJ Features (HA)

New Feature

7206VXR

6500 (MWAM)

7600 (MWAM)

On-Demand Address Pools (ODAP)

-
X
X

HA-SLB

-
X
X

Resource Revocation (IS-835C)

X
X
X

Packet of Disconnect (IS-835C)

X
X
X

HA Redundancy Enhancements

X
X
X

Conditional Debugs for Mobile IP

X
X
X

Hotlining

X
X
X

VRF

X
X
X

Please see the next section for documents that address details on these new features. Any ED release of software should be utilized first in a test network before being deployed in a production network.

Detailed Information

On-Demand Address Pools (ODAP)

Cisco On Demand Address Pool (ODAP) feature supports the capability of a large IP address pool per chassis. Each separate HA processor will request a subnet of IP addresses from the large IP address pool. Local pools per member would not need to be configured at all; one main pool would be configured on Centralized Server. The benefits include more efficient use of IP addresses, centralized management benefits, and simplified operational procedures.

Home Agent Server Load Balancing (HA-SLB)

The Server Load Balancing (SLB) function runs on the Supervisor and front ends a pool of HAs, providing load balancing across a group of HAs running on the MWAMs listed in its server farm. Only one virtual IP address must be known to the FA. Note that the proper option is also required on the Supervisor image to enable this feature. See Ordering section for 6500 and 7600 starting on Page 10 for details.

Resource Revocation Per IS-835C

This allows PDSN to clean up an HA binding (e.g. when call drops) as well as allows HA to clean up a PDSN session, e.g. on handoff. This is the implementation of the standardization of Cisco binding update feature available in HA R1.2 with an additional enhancement.

Packet of Disconnect (PoD) Per IS-835C

This provides a trigger mechanism to cancel sessions on the PDSN and/or HA. The trigger can come from AAA, billing mediation, etc. (whoever is controlling the access). It can be used alone, or in conjunction with Resource Revocation feature, to clean up the session/binding. This means that resources are not wasted.

HA Redundancy Enhancements

This is an enhancement to the existing HA Redundancy feature. It adds support for the feature when local pool IP addressing, or proxy DHCP addressing, is utilized.

Conditional Debugs

Enhancement made to existing conditional debug feature to add support for Mobile IP.

Hotlining

Uses standard IS-835C based CoA messages to change user session profiles at the start of the session or in mid session. Data packets from the subscriber in the upstream can be re-directed to a different server, which will capable of handling these packets. This provides support for "web steering" statically configured by realm and dynamically configured per user within the realm. Example is a prepaid user who runs out of quota can be redirected mid session.

VRF

HA can have virtual HAs which are using the Virtual Router Function (VRF) to support address overlapping. Thus, one HA can provide connection to different corporate users using a different transport.
For more detailed information about the platforms and features being delivered in 12.3(8)XW, please reference the following documents:

Support

Cisco IOS software release 12.3(8)XW follows the standard Cisco support policy as indicated in the following link.

Note: Cisco Software Application Support (SAS) must be ordered for the PDSN; it is not covered under Smartnet. See Product Numbers section below for details. Cisco SAS includes 24-hour technical assistance from the Cisco Technical Assistance Center (TAC) via telephone and the Web, online tools, plus bug fixes, maintenance, and rebuilds of the same release (R2.0) of PDSN and HA.

Product Numbers

The spare product code is designated with `=' and should be ordered when moving to a different PDSN or HA image, or when the platform hardware is not being ordering conjunction with the software.
There are two PDSN images available with R2.0: Basic and Premium.

Basic-Includes basic feature set. 10k session capacity on 7206VXR; 20k session capacity on MWAM

Premium-Includes basic feature set plus Prepaid. 20k session capability on 7206VXR and MWAM

There are two HA images available with R2.0: Basic and Premium.

Basic-Includes basic feature set

Premium-Includes basic feature set plus Hotlining, VRF

There are two options when ordering software for the MWAM:

• Single Image

• Bundled Image

Each single image contains one PDSN image to run on one of the five MWAM processors; each bundled image contains five PDSN images that run on each of five MWAM processors.
When ordering more than one single image, the first one should be ordered as an option to the MWAM. Any subsequent single images, should be ordered as spares.

Table 3. Cisco IOS Release 12.3(8)XW PDSN Product Codes

Platform

Software Feature Set

Product Code

Image

Flash

DRAM

7206VXR
CISCO 7200 IOS PDSN R2.0 BASIC
S72P2B-12308XW
S72P2B-12308XW=
c7200-c6is-mz
64MB
1GB
7206VXR
CISCO 7200 IOS PDSN R2.0 BASIC 3DES
S72P2K9-12308XW S72P2K9-12308XW=
c7200-c6ik9s-mz
64MB
1GB
7206VXR
CISCO 7200 IOS PDSN R2.0 PREMIUM
S72P2X-12308XW
S72P2X-12308XW=
c7200-c6is-mz
64MB
1GB
7206VXR
CISCO 7200 IOS PDSN R2.0 PREMIUM 3DES
S72P2K9X-12308XW
S72P2K9X-12308XW=
c7200-c6ik9s-mz
64MB
1GB
7206VXR
CISCO 7200 IOS PDSN R2.0 BASIC UPGRD FROM R1.2 BASE OR ENH
S72P2UB-12308XW=
c7200-c6is-mz
64MB
1GB
7206VXR
CISCO 7200 IOS PDSN R2.0 BASIC UPGRD FROM R1.2 BASE OR ENH
S72P2UB-12308XW=
c7200-c6is-mz
64MB
1GB
7206VXR
CISCO 7200 IOS PDSN R2.0 PREMIUM UPGRADE FROM R1.2 ENHANCED
S72P2EX-12308XW=
c7200-c6is-mz
64MB
1GB
7206VXR
CISCO 7200 IOS PDSN R2.0 PREM 3DES UPGRD FROM R1.2 ENH 3DES
S72PI2UK9-12308XW=
c7200-c6ik9s-mz
64MB
1GB
7206VXR
CISCO 7200 IOS PDSN R2.0 UPGRADE (BASIC TO PREMIUM)
S72P2UX-12308XW=
c7200-c6is-mz
64MB
1GB
7206VXR
CISCO 7200 IOS PDSN R2.0 UPGRADE (BASIC 3DES TO PREMIUM)
S72P2BK9X-12308XW=
c7200-c6ik9s-mz
64MB
1GB
7206VXR
CISCO 7200 IOS PDSN R2.0 UPGRADE TO 3DES
S72P2UK9-12308XW=
c7200-c6ik9s-mz
64MB
1GB
MWAM
Cisco MWAM Series PDSN R2.0 Basic
SC-SVC-PD20B
SC-SVC-PD20B=
c6svc-5mwam-c6is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series PDSN R2.0 Basic Single Image
SC-SVC-PD20BIM
SC-SVC-PD20BIM=
c6svc-5mwam-c6is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series PDSN R2.0 Premium
SC-SVC-PD20P
SC-SVC-PD20P=
c6svc-5mwam-c6is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series PDSN R2.0 Premium Single Image
SC-SVC-PD20PIM
SC-SVC-PD20PIM=
c6svc-5mwam-c6is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series UPGRD to PDSN R2.0 Basic from R1.2
SC-SVC-PD20B-UP=
c6svc-5mwam-c6is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series UPGRD to PDSN R2.0 Basic SI from R1.2 SI
SC-SVC-PD20BIM-UP=
c6svc-5mwam-c6is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series UPGRD to PDSN R2.0 Premium from Basic
SC-SVC-PD20-UP=
c6svc-5mwam-c6is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series UPGRD to PDSN R2.0 Premium from Basic SI
SC-SVC-PD20IM-UP=
c6svc-5mwam-c6is-b21_11.bin
128MB
512MB

The following Product Codes should be utilized when ordering Cisco Software Application Support (SAS) PDSN R2.0.

Table 4. Cisco Software Application Support (SAS) PDSN R2.0 by Product Code

Product Code

Description

CON-SAS-S72P2BXW
Support for product codes:
S72P2B-12308XW
S72P2B-12308XW=
CON-SAS-S72P2K9XW
Support for product codes:
S72P2K9-12308XW
S72P2K9-12308XW=
CON-SAS-S72P2XXW
Support for product codes:
S72P2X-12308XW
S72P2X-12308XW=
CON-SAS-S72P2K9X
Support for product codes:
S72P2K9X-12308XW
S72P2K9X-12308XW=
CON-SAS-S72P2UBXW
Support for product codes:
S72P2UB-12308XW=
CON-SAS-S72P2BUKX
Support for product codes:
S72P2BUK9-12308XW=
CON-SAS-S72P2EXXW
Support for product codes:
S72P2EX-12308XW=
CON-SAS-S72PI2UXW
Support for product codes:
S72PI2UK9-12308XW=
CON-SAS-S72P2UXXW
Support for product codes:
S72P2UX-12308XW=
CON-SAS-S72P2K9XX
Support for product codes:
S72P2BK9X-12308XW=
CON-SAS-S72UK912X
Support for product codes:
S72P2UK9-12308XW=
CON-SAS-PD20B
Support for product codes:
SC-SVC-PD20B
SC-SVC-PD20B=
CON-SAS-PD20BI
Support for product codes:
SC-SVC-PD20BIM
SC-SVC-PD20BIM=
CON-SAS-PD20P
Support for product codes:
SC-SVC-PD20P
SC-SVC-PD20P=
CON-SAS-PD20PI
Support for product codes:
SC-SVC-PD20PIM
SC-SVC-PD20PIM=

Table 5. Cisco IOS Release 12.3(8)XW HA Product Codes

Platform

Software Feature Set

Product Code

Image

Flash

DRAM

7206VXR
CISCO 7200 IOS MW HOME AGENT R2.0 BASIC
S72PSH2-12308XW
S72PSH2-12308XW=
c7200-h1is-mz
64MB
1GB
7206VXR
CISCO 7200 IOS MW HOME AGENT R2.0 BASIC 3DES
S72PH2K9-12308XW S72PH2K9-12308XW=
c7200-h1ik9s-mz
64MB
1GB
7206VXR
CISCO 7200 IOS MW HOME AGENT R2.0 PREMIUM
S72PH2X-12308XW
S72PH2X-12308XW=
c7200-h1is-mz
64MB
1GB
7206VXR
CISCO 7200 IOS MW HOME AGENT R2.0 PREMIUM 3DES
S72PH2K9X-12308XW
S72PH2K9X-12308XW=
c7200-h1ik9s-mz
64MB
1GB
7206VXR
CISCO 7200 IOS MW HOME AGENT R2.0 BASIC UPGRADE FROM R1.2
S72PH2-12308XW=
c7200-h1is-mz
64MB
1GB
7206VXR
CISCO 7200 IOS MW HOME AGENT R2.0 BASIC 3DES UPGRD FROM R1.2
S72PH2UK9-12308XW=
c7200-h1ik9s-mz
64MB
1GB
7206VXR
CISCO 7200 IOS MW HOME AGENT R2.0 UPGRADE TO 3DES
S72PI2K9-12308XW=
c7200-h1ik9s-mz
64MB
1GB
7206VXR
CISCO 7200 IOS MW HOME AGENT R2.0 UPGRD (BASIC 3DES TO PREM)
S72PI2K9X-12308XW=
c7200-h1ik9s-mz
64MB
1GB
7206VXR
CISCO 7200 IOS MW HOME AGENT R2.0 UPGRD (BASIC TO PREMIUM)
S72PI2-12308XW=
c7200-h1is-mz
64MB
1GB
MWAM
Cisco MWAM Series HOME AGENT R2.0 Basic
SC-SVC-HA20B
SC-SVC-HA20B=
c6svc-5mwam-h1is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series HOME AGENT R2.0 Basic Single Image
SC-SVC-HA20BIM
SC-SVC-HA20BIM=
c6svc-5mwam-h1is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series HOME AGENT R2.0 Premium
SC-SVC-HA20P
SC-SVC-HA20P=
c6svc-5mwam-h1is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series HOME AGENT R2.0 Premium Single Image
SC-SVC-HA20PIM
SC-SVC-HA20PIM=
c6svc-5mwam-h1is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series UPGRD to HA R2.0 Basic from R1.2
SC-SVC-HA20B-UP=
c6svc-5mwam-h1is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series UPGRD to HA R2.0 Basic SI from R1.2 SI
SC-SVC-HA20BIM-UP=
c6svc-5mwam-h1is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series UPGRD to HA R2.0 Premium from Basic
SC-SVC-HA20-UP=
c6svc-5mwam-h1is-b21_11.bin
128MB
512MB
MWAM
Cisco MWAM Series UPGRD to HA R2.0 Premium from Basic SI
SC-SVC-HA20IM-UP=
c6svc-5mwam-h1is-b21_11.bin
128MB
512MB

The following Product Codes should be utilized when ordering Cisco Software Application Support (SAS) HA R2.0.

Table 6. Cisco Software Application Support (SAS) HA R2.0 by Product Code

Product Code

Description

CON-SAS-S72PSH2X
Support for product codes:
S72PSH2-12308XW
S72PSH2-12308XW=
CON-SAS-S72PH2KW
Support for product codes:
S72PH2K9-12308XW
S72PH2K9-12308XW=
CON-SAS-S72PH2XW
Support for product codes:
S72PH2X-12308XW
S72PH2X-12308XW=
CON-SAS-S72PH2K9X
Support for product codes:
S72PH2K9X-12308XW
S72PH2K9X-12308XW=
CON-SAS-S72PH2
Support for product codes:
S72PH2-12308XW=
CON-SAS-S72PH2UK
Support for product codes:
S72PH2UK9-12308XW=
CON-SAS-S72PI2K9
Support for product codes:
S72PI2K9-12308XW=
CON-SAS-S72PI2KX
Support for product codes:
S72PI2K9X-12308XW=
CON-SAS-S72PI2
Support for product codes:
S72PI2-12308XW=
CON-SAS-HA20B
Support for product codes:
SC-SVC-HA20B
SC-SVC-HA20B=
CON-SAS-HA20BIM
Support for product codes:
SC-SVC-HA20BIM
SC-SVC-HA20BIM=
CON-SAS-HA20P
Support for product codes:
SC-SVC-HA20P
SC-SVC-HA20P=
CON-SAS-HA20PIM
Support for product codes:
SC-SVC-HA20PIM
SC-SVC-HA20PIM=

BUNDLE PRODUCT NUMBERS

When ordering multiple MWAMs with the Cisco MWAM Series PDSN R2.0 Premium image, there is a bundle available. The following bundle includes:

• Two MWAMs (WS-SVC-MWAM-1)

• Two bundled images of PDSN R2.0 Premium (SC-SVC-PD20P)

When ordering multiple MWAMs with the Cisco MWAM Series HOME AGENT R2.0 Premium image, there is a bundle available. The following bundle includes:

• Two MWAMs (WS-SVC-MWAM-1)

• Two bundled images of HA R2.0 Premium (SC-SVC-HA20P)

Table 7. Bundle Product Numbers

Platform

Software Feature Set

Product Code

Image

Flash

DRAM

MWAM
Cisco MWAM Series PDSN R2.0 Premium 2 Unit Bundle
WS-SVC-MWPD20-BDL
WS-SVC-MWPD20-BDL=
c6svc-5mwam-c6is-b21_10.bin
128MB
512GB
MWAM
Cisco MWAM Series HOME AGENT R2.0 Premium 2 Unit Bundle
WS-SVC-MWHA20-BDL
WS-SVC-MWHA20-BDL=
c6svc-5mwam-h1is-b21_10.bin
128MB
512GB

Download Information

Customers can download Cisco IOS Release 12.3(8)XW software for the 7206VXR from Cisco Connection Online (CCO) in the Software Image Library.
Customers can download Cisco IOS Release 12.3(8)XW software for the MWAM from Cisco Connection Online (CCO) in the Software Image Library.

Special Note to Customers

The following are additional ordering guidelines and sample configurations for a Home Agent. Note that the configurations are provided for guidance only and do not include hardware Smartnet contracts, or ancillary equipment such as cables, rack mount kits, or high speed fan trays. Please discuss your desired configuration with your Cisco representative prior to ordering.

HA and PDSN R2.0 on 7206VXR

The PDSN and HA images operate on a 7206VXR; it can be used on the NPE-400, providing backward compatibility to R1.2, and on the NPE-G1. All new orders must utilize the NPE-G1.
Following is the recommended hardware configuration for a 7206VXR to be ordered as a PDSN or HA R2.0.

Table 8. Recommended Hardware Configuration for Cisco 7206VXR to be Ordered as a PDSN or HA R2.0.

Product

Description

Quantity

7206VXR/NPE-G1
7206VXR with NPE-G1 includes 3GigE/FE/E Ports and IP SW
1
PWR-7200-DC+
Cisco 7200 DC Power Supply Option
1
PWR-7200/2-DC+
Cisco 7200 Dual DC Power Supply Option
1
MEM-NPE-G1-FLD128
Cisco 7200 Compact Flash Disk for NPE-G1, 128 MB Option
1
MEM-NPE-G1-1GB
Two 512MB mem modules (1GB total) for NPE-G1 in 7200
1
PA-2FE-TX
2-Port Fast Ethernet 100Base TX Port Adapter
1
S72Pxx-xxxxxx
HA or PDSN Image
1
CON-SAS-S72Pxxxx
SAS Support for HA or PDSN Image
1

Note: The above is the configuration as tested in the Cisco lab. Any variations to this configuration should be discussed with your Cisco representative prior to ordering.

HA and PDSN R2.0 on 7206VXR with DES3 Encryption

The HA and PDSN DES3 images operate on a 7206VXR; they can only be used with the NPE-G1 and SA-VAM2. The SA-ISA is End-of-Sale and End-of-Support and thus are not supported.
One SA-VAM2 is required per chassis. IPSec operation is supported only with hardware acceleration.
Following is the recommended hardware configuration for a 7206VXR to be ordered as a PDSN or HA R2.0.

Table 9. Recommended Hardware Configuration for Cisco 7206VXR to be Ordered as a PDSN or HA R2.0.

Product

Description

Quantity

7206VXR/NPE-G1
7206VXR with NPE-G1 includes 3GigE/FE/E Ports and IP SW
1
PWR-7200-DC+
Cisco 7200 DC Power Supply Option
1
PWR-7200/2-DC+
Cisco 7200 Dual DC Power Supply Option
1
MEM-NPE-G1-FLD128
Cisco 7200 Compact Flash Disk for NPE-G1, 128 MB Option
1
MEM-NPE-G1-1GB
Two 512MB mem modules (1GB total) for NPE-G1 in 7200
1
PA-2FE-TX
2-Port Fast Ethernet 100Base TX Port Adapter
1
SA-VAM2
Cisco VPN Acceleration Module 2
1
S72PxxK9x-xxxxxx
HA or PDSN Image
1
CON-SAS-S72Pxxxx
SAS Support for HA or PDSN Image
1

Note: The above is the configuration as tested in the Cisco lab. Any variations to this configuration should be discussed with your Cisco representative prior to ordering.

HA and PDSN R2.0 on 7600

HA and PDSN operate on separate MWAMs. They can be licensed by MWAM (5 processors), or by processor (single image). Note that PDSN and HA images can not coexist on the same MWAM, though an HA MWAM and a PDSN MWAM can coexist in the same chassis.
The 12.2.17d-SXB1 software version must run on the supervisor. The HA and PDSN on MWAM are only supported with the SUP2/MSFC2.
Following is the recommended hardware configuration for a 7613 to be ordered as an HA and/or PDSN R2.0. Recommended supervisor software is also included.

Table 10. Recommended Hardware Configuration for Cisco 7613 to be Ordered as an HA and/or PDSN R2.0

Product

Description

Quantity

CISCO7613
7613 Chassis Bundles
1
 
7613-DC-BUN
7613 Chassis, Sup2, 4000WDC, 512M memory
1
 
PWR-4000-DC
4000W DC Power Sup for CISCO7609/13, Cat6509/13 chassis
1
 
S762Z-12217SXB
Cisco 7600-SUP2/MSFC2 IOS IP
1
 
WS-X6K-S2U-MSFC2/2
Cat6K Red. Sup2 w/ 256MB DRAM, PFC2, MSFC2
1
 
MEM-C6K-ATA-1-64M
Cat 6500 Supervisor ATA Type1 Flash Mem Card, 64MB
1
 
WS-SVC-MWAM-1
Multi-Processor WAN Application Module
1...10
 
WS-X6548-RJ-45
Catalyst 6500 48-port 10/100, Inline Power, RJ-45
1
 

If the HA-SLB feature is desired, the following must also be ordered as an option to the supervisor image, S762Z-12217SXB1.

Table 11. Supervisor Image Option

Product

Description

Quantity

FR-EXCHDR
Mobile Wireless Exchange Director Load Balancer
1

Depending on network configuration, a GE Interface card can be ordered instead of FE interface. In this case the following would be ordered instead of WS-X6548-RJ45.

Table 12. Gigabit Ethernet Options

Product

Description

Quantity

WS-X6408A-GBIC
Catalyst 6000 8-port GE, Enhanced QoS (Req. GBICs)
1
WS-G5484
1000BASE-SX Short Wavelength GBIC (Multimode Only)
8

Note: The above is the configuration as tested in the Cisco lab. Any variations to this configuration should be discussed with your Cisco representative prior to ordering.

HA and PDSN R2.0 on 7600 with DES3 Encryption

HA and PDSN operate on one MWAM. They can be licensed by MWAM (5 processors), or by processor (single image). Note that PDSN and HA images can not coexist on the same MWAM, though an HA MWAM and a PDSN MWAM can coexist in the same chassis.
The 12.2.17d-SXB1 DES3 software version must run on the supervisor; this is different than the non-DES3 image. The HA and PDSN on MWAM are only supported with the SUP2/MSFC2.
One IPSec VPN security module is required per chassis. IPSec operation is supported only with hardware acceleration.
The same HA and PDSN images support both non-IPSec and IPSec.
Following is the recommended hardware configuration for a 7613 to be ordered as an HA and/or PDSN R2.0. Recommended supervisor software is also included.

Table 13. Recommended Hardware Configuration for Cisco 7613 to be Ordered as an HA and/or PDSN R2.0.

Product

Description

Quantity

CISCO7613
7613 Chassis Bundles
1
 
7613-DC-BUN
7613 Chassis, Sup2, 4000WDC, 512M memory
1
 
PWR-4000-DC
4000W DC Powr Sup for CISCO7609/13, Cat6509/13 chassis
1
 
S762ZK9-12217SXB
Cisco 7600-SUP2/MSFC2 IOS IP W/SSH/3DES
1
 
WS-X6K-S2U-MSFC2/2
Cat6K Red. Sup2 w/ 256MB DRAM, PFC2, MSFC2
1
 
MEM-C6K-ATA-1-64M
Cat 6500 Supervisor ATA Type1 Flash Mem Card, 64MB
1
 
WS-SVC-IPSEC-1
IPSec VPN Security Module
1
 
WS-SVC-MWAM-1
Multi-Processor WAN Application Module
1...9
 
WS-X6548-RJ-45
Catalyst 6500 48-port 10/100, Inline Power, RJ-45
1
 

If the HA-SLB feature is desired, the following must also be ordered as an option to the supervisor image, S762Z-12217SXB1.

Table 14. High Availability Software Load Balancing Option

Product

Description

Quantity

FR-EXCHDR
Mobile Wireless Exchange Director Load Balancer
1

Depending on network configuration, a GE Interface card can be ordered instead of FE interface. In this case the following would be ordered instead of WS-X6548-RJ45.

Table 15. Gigabit Ethernet Option

Product

Description

Quantity

WS-X6408A-GBIC
Catalyst 6000 8-port GE, Enhanced QoS (Req. GBICs)
1
WS-G5484
1000BASE-SX Short Wavelength GBIC (Multimode Only)
8

Note: The above is the configuration as tested in the Cisco lab. Any variations to this configuration should be discussed with your Cisco representative prior to ordering.

HA and PDSN R2.0 on 6500

HA and PDSN operate on one MWAM. They can be licensed by MWAM (5 processors), or by processor (single image). Note that PDSN and HA images can not coexist on the same MWAM, though an HA MWAM and a PDSN MWAM can coexist in the same chassis.
The 12.2.17d-SXB1 software version must run on the supervisor. The HA and PDSN on MWAM are only supported with the SUP2/MSFC2.
Following is the recommended hardware configuration for a 6513 to be ordered as an HA and/or PDSN R2.0. Recommended supervisor software is also included.

Table 16. Recommended Hardware Configuration for Cisco 6513 to be Ordered as an HA and/or PDSN R2.0

Product

Description

Quantity

WS-6513
Cat 6513 Chassis, 13slot, 19RU, No Pow Supply, No Fan Tray
1
 
PWR-4000-DC
4000W DC Powr Sup for CISCO7609/13, Cat6509/13 chassis
2
 
S222A-12217SXB
Cisco CAT6000-SUP2/MSFC2 IOS ENT W/IPV6
1
 
WS-X6K-S2U-MSFC2
Cat6K Sup2 w/ 256MB DRAM, PFC2, MSFC2
1
 
MEM-C6K-ATA-1-64M
Cat 6500 Supervisor ATA Type1 Flash Mem Card, 64MB
1
 
WS-X6K-S2U-MSFC2/2
Cat6K Red. Sup2 w/ 256MB DRAM, PFC2, MSFC2
1
 
MEM-C6K-ATA-1-64M
Cat 6500 Supervisor ATA Type1 Flash Mem Card, 64MB
1
 
WS-SVC-MWAM-1
Multi-Processor WAN Application Module
1...10
 
WS-X6548-RJ-45
Catalyst 6500 48-port 10/100, Inline Power, RJ-45
1
 

If the HA-SLB feature is desired, the following must also be ordered as an option to the supervisor image, S762Z-12217SXB1.

Table 17. High Availability Software Load Balancing Option

Product

Description

Quantity

FR-EXCHDR
Mobile Wireless Exchange Director Load Balancer
1

Depending on network configuration, a GE Interface card can be ordered instead of FE interface. In this case the following would be ordered instead of WS-X6548-RJ45.

Table 18. Gigabit Ethernet Option

Product

Description

Quantity

WS-X6408A-GBIC
Catalyst 6000 8-port GE, Enhanced QoS (Req. GBICs)
1
WS-G5484
1000BASE-SX Short Wavelength GBIC (Multimode Only)
8

Note: The above is the configuration as tested in the Cisco lab. Any variations to this configuration should be discussed with your Cisco representative prior to ordering.

HA R2.0 on 6500 with DES3 Encryption

HA and PDSN operate on one MWAM. They can be licensed by MWAM (5 processors), or by processor (single image). Note that PDSN and HA images can not coexist on the same MWAM, though an HA MWAM and a PDSN MWAM can coexist in the same chassis.
The 12.2.17d-SXB1 DES3 software version must run on the supervisor; this is different than the non-DES3 image. The HA and PDSN on MWAM are only supported with the SUP2/MSFC2.
One IPSec VPN security module is required per chassis. IPSec operation is supported only with hardware acceleration.
The same HA and PDSN images support both non-IPSec and IPSec.
Following is the recommended hardware configuration for a 6513 to be ordered as an HA and/or R2.0. Recommended supervisor software is also included.

Table 19. Recommended Hardware Configuration for Cisco 6513 to be Ordered as an HA with 3DES Encryption

Product

Description

Quantity

WS-6513
Cat 6513 Chassis, 13slot, 19RU, No Pow Supply, No Fan Tray
1
 
PWR-4000-DC
4000W DC Powr Sup for CISCO7609/13, Cat6509/13 chassis
2
 
S222AK9-12217SXB
Cisco CAT6000-SUP2/MSFC2 IOS ENT W/IPV6/SSH/3DES
1
 
WS-X6K-S2U-MSFC2
Cat6K Sup2 w/ 256MB DRAM, PFC2, MSFC2
1
 
MEM-C6K-ATA-1-64M
Cat 6500 Supervisor ATA Type1 Flash Mem Card, 64MB
1
 
WS-X6K-S2U-MSFC2/2
Cat6K Red. Sup2 w/ 256MB DRAM, PFC2, MSFC2
1
 
MEM-C6K-ATA-1-64M
Cat 6500 Supervisor ATA Type1 Flash Mem Card, 64MB
1
 
WS-SVC-IPSEC-1
IPSec VPN Security Module
1
 
WS-SVC-MWAM-1
Multi-Processor WAN Application Module
1...9
 
WS-X6548-RJ-45
Catalyst 6500 48-port 10/100, Inline Power, RJ-45
1
 

If the HA-SLB feature is desired, the following must also be ordered as an option to the supervisor image, S762Z-12217SXB1.

Table 20. High Availability Software Load Balancing Option

Product

Description

Quantity

FR-EXCHDR
Mobile Wireless Exchange Director Load Balancer
1

Depending on network configuration, a GE Interface card can be ordered instead of FE interface. In this case the following would be ordered instead of WS-X6548-RJ45.

Table 21. Gigabit Ethernet Option

Product

Description

Quantity

WS-X6408A-GBIC
Catalyst 6000 8-port GE, Enhanced QoS (Req. GBICs)
1
WS-G5484
1000BASE-SX Short Wavelength GBIC (Multimode Only)
8

Note: The above is the configuration as tested in the Cisco lab. Any variations to this configuration should be discussed with your Cisco representative prior to ordering.

Text Box:  Corporate HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAwww.cisco.comTel:	408 526-4000	800 553-NETS (6387)Fax:	408 526-4100	European HeadquartersCisco Systems International BVHaarlerbergparkHaarlerbergweg 13-191101 CH AmsterdamThe Netherlandswww-europe.cisco.comTel:	31 0 20 357 1000Fax:	31 0 20 357 1100	Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAwww.cisco.comTel:	408 526-7660Fax:	408 527-0883	Asia Pacific HeadquartersCisco Systems, Inc.168 Robinson Road#28-01 Capital Tower Singapore 068912www.cisco.comTel: +65 6317 7777Fax: +65 6317 7799Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed onthe Cisco Web site at www.cisco.com/go/offices.Argentina · Australia · Austria · Belgium · Brazil · Bulgaria · Canada · Chile · China PRC · Colombia · Costa Rica · Croatia · Cyprus · Czech Republic Denmark · Dubai, UAE · Finland · France · Germany · Greece · Hong Kong SAR · Hungary · India · Indonesia · Ireland · Israel · Italy · Japan · Korea Luxembourg · Malaysia · Mexico · The Netherlands · New Zealand · Norway · Peru · Philippines · Poland · Portugal · Puerto Rico · Romania · Russia Saudi Arabia · Scotland · Singapore · Slovakia · Slovenia · South Africa · Spain · Sweden · Switzerland · Taiwan · Thailand · Turkey · Ukraine United Kingdom · United States · Venezuela · Vietnam · ZimbabweCopyright  2005 Cisco Systems, Inc. All rights reserved. CCIP, CCSP, the Cisco Powered Network mark, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherSwitch, Fast Step, GigaStack, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MGX, MICA, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, RateMUX, Registrar, ScriptShare, SlideCast, SMARTnet, StrataView Plus, Stratm, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0502R) 	205309.Z_ETMG_CC_6.05Printed in the USA Text Box:  Corporate HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAwww.cisco.comTel:	408 526-4000	800 553-NETS (6387)Fax:	408 526-4100	European HeadquartersCisco Systems International BVHaarlerbergparkHaarlerbergweg 13-191101 CH AmsterdamThe Netherlandswww-europe.cisco.comTel:	31 0 20 357 1000Fax:	31 0 20 357 1100	Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAwww.cisco.comTel:	408 526-7660Fax:	408 527-0883	Asia Pacific HeadquartersCisco Systems, Inc.168 Robinson Road#28-01 Capital Tower Singapore 068912www.cisco.comTel: +65 6317 7777Fax: +65 6317 7799Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed onthe Cisco Web site at www.cisco.com/go/offices.Argentina · Australia · Austria · Belgium · Brazil · Bulgaria · Canada · Chile · China PRC · Colombia · Costa Rica · Croatia · Cyprus · Czech Republic Denmark · Dubai, UAE · Finland · France · Germany · Greece · Hong Kong SAR · Hungary · India · Indonesia · Ireland · Israel · Italy · Japan · Korea Luxembourg · Malaysia · Mexico · The Netherlands · New Zealand · Norway · Peru · Philippines · Poland · Portugal · Puerto Rico · Romania · Russia Saudi Arabia · Scotland · Singapore · Slovakia · Slovenia · South Africa · Spain · Sweden · Switzerland · Taiwan · Thailand · Turkey · Ukraine United Kingdom · United States · Venezuela · Vietnam · ZimbabweCopyright  2005 Cisco Systems, Inc. All rights reserved. CCIP, CCSP, the Cisco Powered Network mark, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherSwitch, Fast Step, GigaStack, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MGX, MICA, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, RateMUX, Registrar, ScriptShare, SlideCast, SMARTnet, StrataView Plus, Stratm, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0502R) 	205309.Z_ETMG_CC_6.05Printed in the USA