Guest

Cisco Aironet 1130 AG Series

End-of-Sale/End-of-Life for the Power Supply for Cisco Aironet 1130, 1140, 1240 and 1300 Series Access Point

  • Viewing Options

  • PDF (110.4 KB)
  • Feedback

EOL6781

Cisco ® announces the end-of-sale and end-of life dates for the Power Supply for Cisco Aironet 1130, 1140, 1240 and 1300 Series Access Point. The last day to order the affected product(s) is November 20, 2009. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Power Supply for Cisco Aironet 1130, 1140, 1240 and 1300 Series Access Point

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

May 22, 2009

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

November 20, 2009

Last Ship Date: HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

February 18, 2010

End of Routine Failure Analysis Date: HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

November 20, 2010

End of New Service Attachment Date: HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

November 20, 2010

End of Service Contract Renewal Date: HW

The last date to extend or renew a service contract for the product.

February 15, 2014

Last Date of Support: HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

November 19, 2014

HW = Hardware, OS SW = Operating System Software, App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

AIR-PWR-A

Pwr Sply In: 100-240VAC Out: 48VDC 380mA-1100, 1130AG, 1200, 521

There is currently no replacement product available for this product.

   

AIR-PWR-A=

Pwr Sply In: 100-240VAC Out: 48VDC 380mA-1100, 1130AG, 1200, 1300

AIR-PWR-B=

Power Sply: 100-240 VAC, Out: 48VDC, 380 mA: 1130, 1140, 1240, 1300

 

Product Migration Options

As we transition to more power-efficient products, the power supply options and availability of spares have changed for the following products, effective immediately:

• Cisco Aironet 1130 Series Access Point

• Cisco Aironet 1140 Series Access Point

• Cisco Aironet 1240 Series Access Point

• Cisco Aironet 1300 Series Outdoor Access Point/Bridge

For these products only, product AIR-PWR-A will continue to be the power supply offered when ordered as an option. However, when a power supply is ordered as a spare, an Energy Star-rated power supply (product AIR-PWR-B=) will be offered, and product AIR-PWR-A= will no longer be available as a spare.

Note: The Cisco Aironet 1140 Series Access Point power supply can be ordered only as a spare, not as an option. By the middle of this calendar year we expect the inventory for product AIR-PWR-A to be depleted, and "option" ordering will be discontinued. At this time it will be replaced by the Energy Star-rated product AIR-PWR-B. Functionally, AIR-PWR-A and AIR-PWR-B are identical, providing 48 VDC output to a 100-240 VAC input. We are in the process of updating all collateral materials and the ordering tool to reflect the addition of the new power supply.

Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the Power Supply for Cisco Aironet 1130, 1140, 1240 and 1300 Series Access Point through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.

For More Information

For more information about the Cisco Aironet Access Point Energy Star-Rated Power Supply, visit http://www.cisco.com/en/US/products/ps6131/index.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to:
To subscribe to receive end-of-life/end-of-sale information, go to: