Guest

Cisco uBR7200 Series Universal Broadband Routers

End-of-Sale and End-of-Life Announcement for the Cisco uBR7200 Series MC16U, MC28X, and MC16X Broadband Processing Engines

  • Viewing Options

  • PDF (102.3 KB)
  • Feedback

EOL6753

Cisco announces the end-of-sale and end-of life dates for the Cisco® uBR7200 Series MC16U, MC28X, and MC16X Broadband Processing Engines. The last day to order the affected product(s) is December 14, 2009. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco uBR7200 Series MC16U, MC28X, and MC16X Broadband Processing Engines

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

June 15, 2009

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

December 14, 2009

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

March 14, 2010

End of SW Maintenance Releases Date:
HW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

December 14, 2010

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

December 14, 2010

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

December 14, 2010

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

March 11, 2014

Last Date of Support:
HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

December 13, 2014

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

UBR-MC16U

uBR7200 Modem Card, 1 DS w/Upx, 6 US, ATDMA, Adv PHY, CPU

UBR-MC28U

uBR7200 Modem Card, 2 DS w/Upx, 8 US, ATDMA, Adv PHY, CPU

UBR-MC16U=

uBR7200 Universal Card 1 DS w/Upx, 6 US, SpecMgmt, CPU

UBR-MC28U=

uBR7200 Universal Card 2 DS w/Upx, 8 US, SpecMgmt, CPU

UBR-MC16X

uBR7200 Modem Card, 1 DS, 6 US, ATDMA, Adv PHY, CPU, no Upx

UBR-MC28U

uBR7200 Modem Card, 2 DS w/Upx, 8 US, ATDMA, Adv PHY, CPU

UBR-MC16X=

uBR7200 Universal Card 1 DS, 6 US, SpecMgmt, CPU

UBR-MC28U=

uBR7200 Universal Card 2 DS w/Upx, 8 US, SpecMgmt, CPU

UBR-MC28X

uBR7200 Modem Card, 2 DS, 8 US, ATDMA, Adv PHY, CPU, no Upx

UBR-MC28U

uBR7200 Modem Card, 2 DS w/Upx, 8 US, ATDMA, Adv PHY, CPU

UBR-MC28X=

uBR7200 Modem Card, 2 DS, 8 US, ATDMA, Adv PHY, CPU, no Upx

UBR-MC28U=

uBR7200 Universal Card 2 DS w/Upx, 8 US, SpecMgmt, CPU

Product Migration Options

Customers are encouraged to migrate to the Cisco uBR7200 Series MC28U Broadband Processing Engine. Information about this product can be found at: http://www.cisco.com/en/US/prod/collateral/modules/ps4969/product_data_sheet0900aecd8012a71e.html.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the Cisco uBR7200 Series MC16U, MC28X, and MC16X Broadband Processing Engines through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End of Sale date.

For More Information

For more information about the Cisco uBR7200 Series MC28U Broadband Processing Engine, visit http://www.cisco.com/en/US/prod/collateral/modules/ps4969/product_data_sheet0900aecd8012a71e.html, or contact your local account representative.
To request information about the Cisco uBR7200 Series MC28U Broadband Processing Engine, send an e-mail to cmtsbu-pms@cisco.com.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.