Cisco announces the end-of-sale and end-of life dates for the Cisco Professional Series LCDs. The last day to order the affected product(s) is February 7, 2013. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco Professional Series LCDs
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
August 9, 2012
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
February 7, 2013
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
May 8, 2013
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.
February 7, 2014
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
February 7, 2014
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
May 5, 2017
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
February 28, 2018
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Remote Control For Cisco Professional LCD, Ver 1, Spare
Semi-Stand For Cisco Professional LCD, Ver 1, 40" LCD
Semi-Stand For Cisco Professional LCD, Ver 1, 40" LCD,Spare
Remote Control, Cisco Professional L-Series LCD, Ver1, Spare
Semi-Stand, Cisco Professional L-Series LCD, Ver1
Semi-Stand, Cisco Professional L-Series LCD, Ver1, Spare
Semi-Stand For Cisco Pro LCD, Ver 1, Spare, NFR
Cisco LCD PRO 110L, 42 inch, 1080p, w/ Remote
Cisco LCD PRO 110L, 42 inch, 1080p, w/ Remote, Spare
Cisco LCD PRO 110L, 47 inch, 1080p, w/ Remote
Cisco LCD PRO 110L, 47 inch, 1080p, w/ Remote, Spare
Remote Control, Cisco Professional 110L-Series LCD, Spare
Mountable Speakers for Cisco Professional 110L-Series LCD
Mountable Speakers for Cisco Prof 110L-Series LCD, HW Spare
Semi-Stand, Cisco Professional 110L-Series 42 inch LCD, Ver
Semi-Stand, Cisco Professional 110L-Series 47 inch LCD, Ver
Semi-Stand, Cisco Professional 110L-Series 42 inch LCD,Spare
Semi-Stand, Cisco Professional 110L-Series 47 inch LCD,Spare
Cisco LCD PRO 110L, 42 inch, 1080p, w/ Remote, NFR
Cisco LCD PRO 110L, 47 inch, 1080p, w/ Remote, NFR
Cisco LCD PRO 110Q, 55 inch, 1080p, w/ Remote
Cisco LCD PRO 110Q, 55 inch, 1080p, w/ Remote, Spare
Remote Control, Cisco Professional 110Q-Series LCD, Spare
Semi-Stand, Cisco Professional 110Q-Series LCD, Ver1
Semi-Stand, Cisco Professional 110Q-Series LCD, Spare
Cisco LCD PRO 110Q, 55 inch, 1080p, w/ Remote, NFR
Product Migration Options
There is no replacement available for the Cisco Professional Series LCDs at this time.
Customers are encouraged to select other potential display vendors.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at
Customers may be able to continue to purchase the Cisco Professional Series LCDs through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to:
Service prices for Cisco products are subject to change after the product End of Sale date.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.