Guest

Digital Receivers/Decoders

End-of-Sale and End-of-Life Announcement for the Continuum DVP Decoder Model D9010

  • Viewing Options

  • PDF (125.8 KB)
  • Feedback

EOL7533

Cisco announces the end-of-sale and end-of-life dates for the Continuum DVP Decoder Model D9010. The last day to order the affected product(s) is October 28, 2011. Customers with active service contracts or active warranties will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active service contracts or active product warranties, support will be available for the shown dates as stated in the applicable service contracts or product warranty terms and conditions, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Continuum DVP Decoder Model D9010

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.

April 29, 2011

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

October 28, 2011

Last Ship Date: HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

January 26, 2012

End of SW Maintenance Releases Date: HW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

October 27, 2012

End of Routine Failure Analysis Date: HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

October 27, 2012

End of New Service Attachment Date: HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

October 27, 2012

End of Service Contract Renewal Date: HW

The last date to extend or renew a service contract for the product.

January 23, 2016

Last Date of Support: HW

The last expected date to receive service and support for the product as entitled by applicable service contracts or warranty terms and conditions **. After this date, all support services for the product are unavailable, and the product becomes obsolete. Warranty duration is based on product ship dates; refer to warranty terms and conditions for details.

October 31, 2016

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

4003499

D9010 Continuum DVP Dec,MPEG2,ASI In,B/B Out,NA

4005964

D9850 Prgm Rx,SDI,AES-3id,ASI In,NA P/C

-

4003499

D9010 Continuum DVP Dec,MPEG2,ASI In,B/B Out,NA

401943801060001

D9854 4xDVB-S/S2,ASI In,SD MP2/4 PVu Def,NA

-

4008906

D9010 Continuum DVP Dec,MPEG2,ASI In,B/B Out,No P/C

See Product Migration Options section for details.

Cisco PowerVu Model D9850 Program Receiver (PID 4006897) and Cisco Model D9854 Advanced Program Receiver (PID 4019438010600xx - for exact PID,pls refer to D9854 Datasheet)

-

Product Migration Options

The PowerVu Model D9850 Program Receiver and Model D9854 Advanced Program Receiver are the direct replacements for this product. If the D9010 part number that you normally purchase is not listed in Table 2,please contact Cisco to identify a D9850 or D9854 replacement part number. Please review the PowerVu Model D9850 Program Receiver or Model D9854 Advanced Program Receiver data sheet to ensure the unit meets the requirements of your application prior to ordering.
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html.
Customers may be able to continue to purchase the Continuum DVP Decoder Model D9010 through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.

For More Information

For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/products_end-of-life_policy.html.
** For more information about the Cisco Product Warranties, go to: http://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html.

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.