Guest

Cisco 7800 Series Media Convergence Servers

Cisco MCS 7816-I3 Unified Communications Manager Appliance

  • Viewing Options

  • PDF (113.6 KB)
  • Feedback

Cisco Unified Communications Solutions unify voice, video, data, and mobile applications on fixed and mobile networks enabling easy collaboration every time from any workspace.

Product Overview

The Cisco MCS 7816-I3 Unified Communications Manager Appliance is an integral part of a complete entry-level architecture for a new generation of high-quality unified communications solutions that operate on enterprise data networks. This powerful platform is a solution that is easy to deploy and highly cost-effective, and it delivers the high performance and availability that today's enterprise networks demand. The server appliance is preinstalled with an operating system and the Cisco Unified Communications Manager application. Formerly known as Cisco Unified CallManager, Cisco Unified Communications Manager is fully operational upon startup, requiring entry of just a few configuration variables such as IP address and domain.

Key Features and Benefits

Performance

The Cisco MCS 7816-I3 is a robust, highly available server platform designed to support today's unified communications applications. It uses a single Intel Celeron D 352, 3.2-GHz processor with a 533-MHz front-side bus (FSB).

Serviceability

Serviceable SATA Disk Drives

The Cisco MCS 7816-I3 is configured with one 160-GB Serial Advanced Technology Attachment (SATA) "cold-pluggable" disk drive, which is accessible through openings in the front bezel of the server. If a drive fails, you can schedule server downtime, power down the server, and replace the failed SATA drive by simply removing it (each drive is equipped with a front latch that positively mates the drive to the server) and replacing it with an unconfigured spare drive.

DAT Tape Drive Support

The Cisco MCS 7816-I3 can support a 36/72-GB universal-serial-bus (USB) external Digital Audio Tape (DAT) drive (part number DAT-USB-EXT-72=) or an optional 36/72-GB USB rack-mount DAT drive (part number DAT-USB-RM-72=). This tape drive connects through one of the USB 2.0 ports provided by the Cisco MCS 7816-I3 server.

Product Specifications

Tables 1 and 2 give specifications of the Cisco MCS 7816-I3.

Table 1. Product Specifications

Component

Value

Product part number

MCS7816I3-K9-CMC1

Preload

Cisco Unified Communications Manager 7.0

OS

Included

Processor

Single Intel Celeron D 352

Memory

2-GB (two 1-GB) PC2-5300 error-correcting code (ECC) double-data-rate 2 (DDR2)

Hard disks

One 160-GB SATA 2.5-inch cold-swap drive

Remote management

IBM Remote Supervisor Adapter (RSA) II Slimline: Supported but not included

Component

Value

Product part number

MCS7816I3-K9-CMB2

Preload

Cisco Unified Communications Manager 6.1

OS

Included

Processor

Single Intel Celeron D 352

Memory

2-GB (two 1-GB) PC2-5300 ECC DDR2

Hard disks

One 160-GB SATA 2.5-inch cold-swap drive

Remote management

IBM RSA II Slimline: Supported but not included

Component

Value

Product part number

MCS7816I3-K9-CMB1

Preload

Cisco Unified Communications Manager 6.0

OS

Included

Processor

Single Intel Celeron D 352

Memory

2-GB (two 1-GB) PC2-5300 ECC DDR2

Hard disks

One 160-GB SATA 2.5-inch cold-swap drive

Remote management

IBM RSA II Slimline: Supported but not included

Component

Value

Product ID

MCS7816I3-K9-CMA2

Preload

Cisco Unified Communications Manager 5.1

OS

Included

Processor

Single Intel Celeron D 352

Memory

2-GB (two 1-GB) PC2-5300 ECC DDR2

Hard disks

One 160-GB SATA 2.5-inch cold-swap drive

Remote management

IBM RSA II Slimline: Supported but not included

Table 2. Specifications of Cisco MCS 7816-I3

Processor at Product Introduction

Maximum processors

1

Processors installed

1

Basic input/output system (BIOS) type

Flash memory

Memory

Memory maximum

8 GB

Memory bus clock

667 MHz

Memory technology

PC2-5300 667 MHz DDR2 synchronous dynamic RAM (SDRAM)

Bit-error mitigation

ECC

Total RAM slots

4

Redundant Array of Independent Disks (RAID) Controller

Controller model

None

Hard disk

Data-transfer rate (burst)

150 MB per second

Hard disk average seek time

9 ms

Hard disk interface type

SATA

Cold-swappable bays

2

Network Connectivity

Ethernet network interface card (NIC)

Dual onboard 10/100/1000

Ethernet connectors

2 RJ-45 connectors on rear of server

10BASE-T cable support

EIA Category 3, 4, or 5 unshielded twisted pair (UTP) (2 or 4 pair) up to 328 ft (100m)

100BASE-TX cable support

EIA Category 5 UTP (2 pair) up to 328 ft (100m)

1000BASE-T cable support

EIA Category 6 UTP (recommended), 5E UTP, or 5 UTP (2 pair) up to 328 ft (100m)

Interface Port Specifications

Video Graphics Array (VGA) ports

1

Serial ports

1

Parallel ports

0

Universal-serial-bus (USB) 2.0 ports

4

Keyboard port

1

Mouse port

1

Audio ports

None

System management ports

None

Security

• Power-on and privileged access password functions that control who has access to the data and server setup program on the server
• A selectable boot sequence that can prevent unauthorized installation of software or removal of data from the diskette drive

Expansion Options

8x PCI-Express full height, three-quarter length

1

8x PCI-Express low profile, half length

1

Power

Power-supply output power

351W

Input requirements (per power supply): Rated line voltage

100 to 127 VAC and 200 to 240 VAC

Rated input current

6A (100 VAC), 6A (120 VAC), and 3A (200 VAC)

Rated input frequency

50 to 60 Hz

Environmental

Air temperature: Server on

50 to 95°F (10 to 35°C) at 0 to 3000 ft (0 to 914.4m)

50 to 89.6°F (10 to 32°C) at 3000 to 6998 ft (914.4 to 2133m)

Air temperature: Server off

50 to 109.4°F (10 to 43°C)

Humidity: Server on

8 to 80% (noncondensing)

Maximum altitude

7000 ft (2133m)

BTU rating (maximum)

1048/hr

Sound emissions, idle

6.5 bels (operating)

Dimensions

Form factor

Rack-mount 1 rack unit (1RU)

Weight: Maximum

28.0 lb (12.7 kg)

Height

1.75 in. (43 mm)

Width

17.32 in. (440 mm)

Depth

22.0 in. (559 mm)

Equipment Approvals and Safety

• FCC-Verified to comply with Part 15 of the FCC Rules, Class A
• Canada ICES-003, issue 4, Class A
• UL/IEC 60950-1*
• CSA C22.2 No. 60950-1-03
• NOM-01913

*This server model is certified by the respective UL and NOM agencies.

Ordering Information

To order this product, visit the Cisco Ordering Home Page and refer to Tables 2 and 3.
You can order the appliance in one of two ways. You can enter UNIFIED-CM-7.0 or UNIFIED-CM-6.1 or UNIFIED_CM_6.0 or CALLMANAGER-5.1 into the Dynamic Configuration tool on Cisco.com and you will view a list of Cisco Unified Communications Manager Appliances and their associated licenses. You can also order the components individually using the following part numbers:

• MCS7816I3-K9-CMC1 (preloaded with Cisco Unified Communications Manager 7.0)

• MCS7816I3-K9-CMB2 (preloaded with Cisco Unified Communications Manager 6.1)

• MCS7816I3-K9-CMB1 (preloaded with Cisco Unified Communications Manager 6.0)

• MCS7816I3-K9-CMA2 (preloaded with Cisco Unified Communications Manager 5.1)

• LIC-CM7.0-7816=

• LIC-CM6.0-7816=

• LIC-CM5.1-7816=

• KEY-CCM-ADMIN-K9= (order a minimum quantity of 2)

• DAT-USB-EXT-72= (optional external USB DAT tape drive)

• DAT-USB-RM-72= (optional rack-mount USB DAT tape drive)

• DAT-USB-ADPT= (required if DAT-USB-EXT-72= or DAT-USB-RM-72= are used)

• MOH-USB-AUDIO= (USB music-on-hold adapter)

Appliance Spares

To order spare appliances, reference Table 2.

Table 3. Ordering Information for Spare Appliances

Application

Spare Part Number

Cisco Unified Communications Manager 7.0

MCS7816-I3-K9-CMC1

Cisco Unified Communications Manager 6.1

MCS7816-I3-K9-CMB2

Cisco Unified Communications Manager 6.0

MCS7816-I3-K9-CMB1

Cisco Unified Communications Manager 5.1

MCS7816-I3-K9-CMA2

Field-Replaceable Spares

Table 3 gives ordering information for server spare parts.

Table 4. Ordering Information for Server Spare Parts

Spare-Part Number

Description

MEM-7816-I3-2GB=

Spare pair 1-GB SDRAM dual in-line memory module (DIMM) for Cisco MCS 7816-I3 server

HDD-7816-I3-160=

Spare 160-GB SATA hard disk drive, cold-pluggable

DAT-USB-EXT-72=

Spare external USB 36-/72-GB DAT drive

DAT-USB-RM-72=

Spare rack-mount USB 36-/73-GB DAT drive

Warranty Information

Cisco offers a 1-year limited hardware warranty on Cisco media convergence servers. For terms and conditions of this warranty, refer to http://www.cisco.com/univercd/cc/td/doc/es_inpck/1y1cen__.htm.

Cisco Unified Communications Services

Cisco Unified Communications Services allows you to accelerate cost savings and productivity gains associated with deploying a secure, resilient Cisco Unified Communications solution. Delivered by Cisco and our certified partners, our portfolio of services is based on proven methodologies for unifying voice, video, data, and mobile applications on fixed and mobile networks. Our unique lifecycle approach to services enhances your technology experience to accelerate true business advantage.