End-of-Sale and End-of-Life Announcement for Specific products of the Cisco IAD2400 Series

Available Languages

Download Options

PDF (74.8 KB)
View with Adobe Reader on a variety of devices

Updated:June 4, 2008

Document ID:1518394798866524

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

EOL1198

Cisco® announces the end-of-sale and end-of life dates for specific product of the Cisco IAD2400 Series. The last day to order the affected product(s) is October 20, 2004. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco IAD2400 Series


Milestone	Definition	Date
End-of-Life Announcement Date	The date the document that announces the end of sale and end of life of a product is distributed to the general public.	April 21, 2004
End-of-Sale Date	The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.	October 20, 2004
Last Ship Date: HW	The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.	January 18, 2005
End of SW Maintenance Releases Date: HW	The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.	October 20, 2005
End of Routine Failure Analysis Date: HW	The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.	October 20, 2005
End of New Service Attachment Date: HW	For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.	October 20, 2005
End of Service Contract Renewal Date: HW	The last date to extend or renew a service contract for the product.	January 15, 2009
Last Date of Support: HW	The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.	October 19, 2009

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement


End-of-Sale Product Part Number	Product Description
IAD2420-16FXS	IAD2420 with 16 FXS ports and 1 Ethernet Port
IAD2421-16FXS	Cisco IAD2400 with T1 WAN and 16 FXS Analog Voice Ports
IAD2421-16FXS8FXO	Cisco IAD2400 w/ T1 WAN / 16FXS / 8 FXO Analog Voice Ports
IAD2421-1T1	Cisco IAD2400 with T1 WAN and T1 PBX Digital Voice Port
IAD2423-8FXS	Cisco IAD2400 with ADSL WAN and 8 FXS Analog Voice Ports
IAD2424-16FXS	Cisco IAD2400 with G.shdsl WAN and 16 FXS Analog Voice Ports
IAD2424-16FXS8FXO	Cisco IAD2400 with G.shdsl, 16 FXS and 8 FXO Voice Ports
IAD2424-1T1	Cisco IAD2400 with G.shdsl WAN and T1 PBX Digital Voice Port
IAD2424-8FXS	Cisco IAD2400 with G.shdsl WAN and 8 FXS Analog Voice Ports

Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.

Customers may be able to continue to purchase the Elements of Cisco IAD2400 through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos

For More Information

For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/prod_end_of_life.html

To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice

Contact Cisco

Was this Document Helpful?

Feedback