Cisco announces the end-of-sale and end-of life dates for the Cisco® BTS 10200 Specified Hardware. The last day to order the affected product(s) is March 16, 2007. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
The information in this Cisco BTS 10200 end-of-life/end-of-sale product bulletin is limited to Cisco direct and Cisco approved reseller purchases and is applicable only to the product part numbers in Table 2. For non Cisco purchases, please refer to the original equipment manufacturer's website for hardware service and support terms and conditions.
Table 1. End-of-Life Milestones and Dates for the Cisco BTS 10200 Specified Hardware
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
September 15, 2006
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
March 16, 2007
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
June 14, 2007
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
March 15, 2008
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
March 15, 2008
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
June 11, 2011
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
March 14, 2012
Table 2. Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Sunfire 1280 with 4 CPU - AC Power
Netra 1280 with 4 CPU - DC Power
Additional 4 Processors, 8 GB Memory for 1280 Expansion
Sunfire V240, 2 Processors, 8 GB Memory
Sun Netra 240, 2 Processors, 8 GB Memory
Sunfire V440 with 4 Processors, 8 GB Memory
Sun Netra 440, 4 Processors, 8 GB Memory
Product Migration Options
There is no replacement available for the Cisco BTS 10200 Specified Hardware at this time.
Customers should order the Cisco specified Sun hardware from Sun Microsystems or a Sun dealer.
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html
Customers may be able to continue to purchase the Cisco BTS 10200 Specified Hardware through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to:
Service prices for Cisco products are subject to change after the product End of Sale date.