Guest

Cisco 7800 Series Media Convergence Servers

IBM Server Solutions

  • Viewing Options

  • PDF (375.6 KB)
  • Feedback

Note: This webpage describes nonvirtualized "appliance" support for IBM servers. For virtualization support, refer to http://www.cisco.com/go/uc-virtualized.

Cisco is introducing software applications from the Cisco® Unified Communications portfolio that install on specific configurations of customer-provided IBM xSeries x3650-M2 and x3250-M3 servers. Available applications include: Cisco Unified Communications Manager, Cisco Emergency Responder, Cisco Unified Application Environment, Cisco Unity® unified messaging, Cisco Unity Connection, Cisco Unified Presence, Cisco Unified Mobility Advantage, Cisco Unified MeetingPlace® conferencing, Cisco Unified MeetingPlace Express, Cisco Unified Contact Center Express, Cisco Unified Contact Center Enterprise and Hosted, Cisco Unified Intelligent Contact Management Enterprise and Hosted, Cisco Unified Customer Voice Portal, Cisco Unified IP Interactive Voice Response (IP IVR), Cisco Unified Intelligence Center, Cisco Unified Web Interaction Manager, Cisco Unified E-Mail Interaction Manager, Cisco Unified Contact Center Management Portal, and Cisco Unified Expert Advisor.

Cisco also supports the use of HP USB-attached tape drives as local backup devices for these servers. Refer to the "HP Tape Drives" section later in this document for details and ordering instructions.

Note: IBM no longer supports battery replacement on IBM servers, whether the battery is part of an IBM server provided by the customer or a Cisco MCS 7800 server. Please visit this link for more details on IBM's policy for "consumable" components with limited useful lives:
http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=MIGR-5072280.

Customer-provided servers must exactly match the vendor, make, model, specifications, and parts lists in the configurations listed in the following sections to be supported. Deviations are not supported, and may result in an incomplete or failed install, or postinstallation problems. Customer-provided servers must also be on the certified hardware compatibility list for the intended software product and version.
Where equivalent Cisco 7800 Media Convergence Server model numbers are given, they should be interpreted as the configurations used by Cisco Unified Communications Manager. The same MCS model used for other applications (where the MCS model has a different suffix) may use different components and specifications. Contact your local Cisco account team for more details.
Cisco no longer stocks memory and disk drive components for end-of-sale Cisco MCS 7800 models. Please consult the parts lists in the "Older IBM Servers" section later in this document to get the IBM part numbers of these components, and procure them direct from IBM. Remember to remove these parts if the Cisco Technical Assistance Center (TAC) ever performs a return materials authorization (RMA) on the Cisco MCS 7800. If IBM no longer has these parts available, then consider migrating to either a newer appliance or a virtualized solution as described at http://www.cisco.com/go/uc-virtualized.
For purchasing questions not addressed in the following sections, please contact an IBM representative for your country at: http://www.ibm.com/planetwide.

Cisco Approved Hardware Configuration Requirements

Table 1 lists supported platforms for the Cisco Unified Communications products listed previously. Note that the Cisco MCS 7816 and MCS 7828 Media Convergence Servers do not have a software-only supported option.
For additional details about platform support for the following Cisco Unified Communications products, please consult the following references:

• For Cisco Emergency Responder, refer to the release notes at: http://www.cisco.com/en/US/products/sw/voicesw/ps842/products_data_sheets_list.html.

• For Cisco Unity Connection, please visit: http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/data_sheet_c78-491743.html.

• For the Cisco Unity solution, please visit: http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps2237/product_data_sheet0900aecd802132ef.html.

• For Cisco Unified Mobility Advantage, refer to "Ordering Information" in the data sheet for Cisco Unified Mobile Communicator at: http://www.cisco.com/en/US/products/ps7271/products_data_sheets_list.html.

• For Cisco Unified Contact Center Express, please visit: http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_device_support_tables_list.html.

• For Cisco Unified Contact Center Enterprise, refer to Appendix A of the bill of materials at: http://www.cisco.com/en/US/products/sw/custcosw/ps1844/products_implementation_design_guides_list.html.

• For Cisco Unified Customer Voice Portal, refer to the Cisco Unified Customer Voice Portal hardware and software specifications at: http://www.cisco.com/en/US/products/sw/custcosw/ps1006/prod_technical_reference_list.html.

• For Cisco Unified Presence hardware and software compatibility information, please visit: http://www.cisco.com/en/US/products/ps6837/products_device_support_tables_list.html.

• For the Cisco Unified Communications Management Suite, please visit: http://www.cisco.com/go/uc-virtualized.

Please contact IBM for hardware options for rack-mount kits, power supplies, and power cords (also note that Cisco 7800 series Media Convergence Servers from Cisco no longer ship with cable management arms).Tables 2 and 3 list the IBM ordering instructions for the different hardware configurations. Note that although these special "for Cisco" part numbers are available worldwide, they are not generally announced so will not show up in any business partner catalogs or other locations on IBM's general website. They are usually available through the IBM online configurator tool at https://www-01.ibm.com/products/hardware/configurator/americas/bhui/launchNI.wss.

Table 1. Currently Supported Hardware Configurations

Customer-Provided IBM Hardware Configuration (Equivalent to Cisco 7800 Model/Generation)

Equivalent Cisco Hardware-Only Cisco 7800 Model/Generation Product IDs

IBM Label

IBM Part Number

IBM x3650-M2

1 Quad-Core Intel 2.00GHz Nehalem E5504 Processor

4GB RAM

2x 300GB Hard Drives

MCS-7835-I3-IPC2

MCS-7835-I3-CXC1

MCS-7835-I3 V05

7947-PNT

1 Quad-Core Intel 2.53GHz Intel Nehalem E5630 Processor

6GB RAM

4x 146GB Hard Drives

MCS-7845-I3-IPC2

MCS-7845-I3-CXC1

MCS-7845-I3 V05

7947-PNU

IBM x3250-M3
Single Intel X3430 2.4GHz Quad-Core Processor
4GB RAM
2x 250GB Hard Drives

MCS-7825-I5-IPC1

MCS-7825-I5-CCX1

MCS-7825-I5-CCE1

MCS-7825-I5-ECS1

MCS-7825-I5-RC1

MCS-7825-I5-MOB1

MCS-7825-I5

4251-PAF

Table 2. x3650-M2 Ordering Instructions from IBM

IBM x3650-M2

IBM Direct

IBM Reseller

Worldwide

Order IBM CSEO* part number 7947-PML, 7947-PMK, 7947-PMJ, 7947-PMH, or 7947-PNK by contacting an IBM sales representative or the IBM Order Desk in your geography. These single part numbers contains all required components of the Cisco supported configuration.

IBM Contacts by Geography:
http://www.ibm.com/planetwide/

* These part numbers are not generally announced, and are only made available for purchase by customers of these Cisco solutions.

Order IBM CSEO* part number 7947-PML, 7947-PMK, 7947-PMJ, 7947-PMH, or 7947-PNK by contacting an IBM business partner. These single part numbers contains all required components of the Cisco supported configuration.

IBM Business Partner Locator: http://d03bphrb.partner.boulder.ibm.com/bpconnections
/bpcms.nsf/PublicSearchGUI?OpenFrameset&NL=en

Note that since this is a custom "for Cisco" model, business partners may need to create a new part number in their ordering system to match the special IBM part numbers above.

Table 3. x3250-M3 Ordering Instructions from IBM

IBM x3250-M3

IBM Direct

IBM Reseller

Worldwide

Order IBM CSEO* part number 4251-PAF by contacting an IBM sales representative or the IBM Order Desk in your geography. This single part number contains all required components.

IBM Contacts by Geography:
http://www.ibm.com/planetwide/

* These part numbers are not generally announced, and are only made available for purchase by customers of these Cisco solutions.

Order IBM CSEO* part number 4251-PAF by contacting an IBM business partner. This single part number contains all required components.

IBM Business Partner Locator: http://d03bphrb.partner.boulder.ibm.com/bpconnections/
bpcms.nsf/PublicSearchGUI?OpenFrameset&NL=en

Note that since this is a custom "for Cisco" model, business partners may need to create a new part number in their ordering system to match the special IBM part numbers above.

IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 300-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications. When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB of memory is provided. Table 4 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 4. Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 300-GB Hard Drives

Quantity

IBM Part Number (Worldwide)

Description

1

7947-PML

IBM System x3650 M2

1

Standard

System Common planar for 1U/2U

1

Standard

Intel Xeon Processor E5504 4C (2.0GHz 4MB L3 Cache 800MHz 80w)

2

Standard

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

Standard

ServeRAID-MR10i SAS/SATA Controller

1

Standard

ServeRAID-MR10i Li-Ion Battery

1

Standard

8 HDD Enablement Kit

2

Standard

IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

Standard

IBM 675W Redundant Power Supply

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

Standard

IBM Virtual Media Key

1

Standard

8GB USB Key for Cisco Unified Communications Solution

IBM x3650-M2 Server with Single Quad-Core E5630 2.53-GHz Processor and 300-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications. When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB of memory is provided. Table 5 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 5. Hardware for IBM x3650-M2 with Intel Quad-Core E5630 2.53-GHz Processor and 300-GB Hard Drives

Quantity

IBM Part Number (Worldwide)

Description

1

7947-PMK

IBM System x3650 M2

1

Standard

System Common planar for 1U/2U

1

Standard

or Intel Xeon Processor E5630 (2.53 GHz)

3

Standard

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

Standard

ServeRAID-MR10i SAS/SATA Controller

1

Standard

ServeRAID-MR10i Li-Ion Battery

1

Standard

8 HDD Enablement Kit

4

Standard

IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

Standard

IBM 675W Redundant Power Supply

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

Standard

IBM Virtual Media Key

1

Standard

8GB USB Key for Cisco Unified Communications Solution

IBM x3250-M3 with Single Intel X3430 2.4-GHz Quad-Core Processor

The IBM x3250 M3 is a high-performance server platform for today's unified communications applications. When configured properly for Cisco Unified Communications Manager, up to 1,500 devices on a single server and up to 4,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB of memory is provided.
Table 6 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 6. Hardware for IBM x3250 M3 with Single Intel X3430 2.4-GHz Quad-Core Processor

Quantity

IBM Part Number (Worldwide)

Description

1

4251-PAF

IBM System x3250 M3

1

Standard

Base Hardware/Fixed PSU

1

Standard

Quad-Core Intel Xeon X3430 (2.4GHz/1333MHz-8MB Cache)

2

Standard

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

Standard

Simple Swap SATA RAID Kit 3.5"

1

Standard

ServeRAID-BR10il SAS/SATA Controller v2

2

Standard

250GB 7200 RPM 3.5" Simple-Swap SATA II

1

Standard

Internal SATA RAID - Cabled Only, Setup by Customer

1

Standard

Riser Assembly PCI-E

1

Standard

IBM UltraSlim Enhanced SATA Multi-Burner

1

Standard

8GB USB Key (Small Form Factor) fpr Cisco Unified Communications Solution

Older IBM Servers

If you are using older IBM servers and want to upgrade to newer software releases, refer to Table 7 for a list of older configurations that are still supported. Note that IBM has discontinued these models and you can no longer purchase them from IBM or its resellers. Please contact your local Cisco account team for information about replacement models and ordering assistance.

Table 7. Older Supported Hardware Configurations (Not Shipping)

Customer-Provided IBM Hardware Configuration (Equivalent to Cisco 7800 Model/Generation)

Equivalent Hardware-Only Cisco 7800 Model/Generation Product IDs

IBM x3650-M2

1 Quad-Core Intel 2.00GHz Nehalem E5504 Processor

4GB RAM

2x 146GB Hard Drives

MCS-7835-I3-IPC1 (MCS 7835-I3 V01-V04 CUCM variant)

MCS-7835-I3-CCX1

MCS-7835-I3-CCE1

1 Quad-Core Intel 2.53GHz Intel Nehalem E5540 or E5630 Processor

6GB RAM

4x 146GB Hard Drives

MCS-7845-I3-IPC1 (MCS 7845-I3 V01-V04 CUCM variant)

MCS-7845-I3-CCX1

MCS-7845-I3-CCE1

IBM x3650-M2 with DC Power

1 Quad-Core Intel 2.53GHz Intel Nehalem E5540 Processor

6GB RAM

4x 146GB Hard Drives

N/A

1 Quad-Core Intel 2.00GHz Intel Nehalem E5504 Processor

4GB RAM

2x 300GB Hard Drives

MCS-7835-I3-ECS1 (MCS 7835-I3 V01-V04 messaging variant)

2 Quad-Core Intel 2.53GHz Intel Nehalem E5540 Processor

8GB RAM

4x 300GB Hard Drives

MCS-7845-I3-ECS1 (MCS 7845-I3 V01-V04 messaging variant)

MCS-7845-I3-MOB1

MCS-7845-I3-CCE2

IBM x3650-M2

1 Quad-Core Intel 2.00GHz Nehalem E5504 Processor

4GB RAM

2x 146GB Hard Drives

MCS-7835-I3-IPC1

MCS-7835-I3-CCX1

MCS-7835-I3-CCE1

IBM x3650-M2

1 Quad-Core Intel 2.53GHz Intel Nehalem E5540 Processor

6GB RAM

4x 146GB Hard Drives

MCS-7845-I3-IPC1

MCS-7845-I3-CCX1

MCS-7845-I3-CCE1

IBM x3650-M2

1 Quad-Core Intel 2.00GHz Intel NehalemE5504 Processor

4GB RAM

2x 300GB Hard Drives

MCS-7835-I3-ECS1

IBM x3650-M2

2 Quad-Core Intel 2.53GHz Intel Nehalem E5540 Processor

8GB RAM

4x 300GB Hard Drives

MCS-7845-I3-ECS1

MCS-7845-I3-MOB1

MCS-7845-I3-CCE2

x3650 Server
2x Xeon 5140 2.33GHz Processor
4GB RAM
4x 72GB Hard Disk

MCS-7845-I2-IPC1
MCS-7845-I2-CCE1
MCS-7845-I2-CCX1
MCS-7845-I2-ECS2 (4x146GB hard disk)
MCS-7845-I2-ECS1 (8x72GB hard disk)

x346 or 346r Server
2x Xeon 3.4GHz Processor
4GB RAM
4x 72GB Hard Disk

MCS-7845-I1-IPC1
MCS-7845-I1-CC1
MCS-7845-I1-ECS2
MCS-7845-I1-ECS1
(4x72GB and 2x144GB hard disk configuration)

x345 Server
2x Xeon 3.06GHz Processor
4GB RAM
4x 72GB Hard Disk

MCS-7845I-3.0-IPC1
MCS-7845I-3.0-CC1
MCS-7845I-3.0-ECS2 (4x36GB hard disk)
MCS-7845I-3.0-ECS1 (4x36GB and 2x72GB hard disks)

x3650 Server
Single Xeon 5140 2.33GHz Processor
2GB RAM
2x 72GB Hard Disk

MCS-7835-I2-IPC1
MCS-7835-I2-CCE1
MCS-7835-I2-CCX1
MCS-7835-I2-ECS1

x346 Server
Single Xeon 3.4GHz Processor
2GB RAM
2x 72GB Hard Disk

MCS-7835-I1-IPC1
MCS-7835-I1-CC1
MCS-7835-I1-ECS1

x345 Server
Single Xeon 2.4 or 3.0GHz Processor
1GB RAM
2x 36GB Hard Disk

MCS-7835I-2.4-EVV1
MCS-7835I-3.0-IPC1
MCS-7835I-3.0-ECS1

IBM x3250-M2
Single Intel E3110 3.0GHz Dual-Core Processor (Note: MCS equivalent uses long-life equivalent CPU model E8400)
2G RAM
2x 250GB Hard Drives

IBM Part Number: 4190-PAF

MCS-7825-I4-IPC1

MCS-7825-I4-CCX1

MCS-7825-I4-CCE1

MCS-7825-I4-ECS1

MCS-7825-I4-RC1

MCS-7825-I4-MOB1

x3250 Server
Single Intel 3050 Xeon 2.13GHz
2GB RAM
2x 160GB Hard Disk

MCS 7825-I3-IPC1
MCS-7825-I3-CCE1
MCS-7825-I3-CCX1
MCS-7825-I3-ECS1

x306m Server
Single Intel 950 3.4GHz
2GB RAM
80GB Hard Disk

MCS 7825-I2-IPC2
MCS-7825-I2-ECS1

x306m Server
Single Pentium D 2.8GHz
2GB RAM
80GB Hard Disk

MCS-7825-I2-IPC1
MCS-7825-I2-CCE1
MCS-7825-I2-CCX1

x306 Server
Single Pentium 4 3.4GHz
2GB RAM
80GB Hard Disk

MCS-7825-I1-IPC1
MCS-7825-I1-CC1
MCS-7825-I1-ECS1

x306 Server
Single Pentium 4 3.06GHz
1GB RAM
80GB Hard Disk

MCS-7825I-3.0-IPC1
MCS-7825I-3.0-IPC2
MCS-7825I-3.0-CC1
MCS-7825I-3.0-ECS1

IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 146-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications. When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB of memory is provided. Table 8 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 8. Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 146-GB Hard Drives

Quantity

IBM Part Number (Worldwide)

Description

1

7947-PML

IBM System x3650 M2

1

Standard

System Common planar for 1U/2U

1

Standard

Intel Xeon Processor E5504 4C (2.0GHz 4MB L3 Cache 800MHz 80w)

2

Standard

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

Standard

ServeRAID-MR10i SAS/SATA Controller

1

Standard

ServeRAID-MR10i Li-Ion Battery

1

Standard

8 HDD Enablement Kit

2

Standard

IBM 146GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

Standard

IBM 675W Redundant Power Supply

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

Standard

IBM Virtual Media Key

1

Standard

8GB USB Key for Cisco Unified Communications Solution

IBM x3650-M2 Server with Single Quad-Core E5540 or E5630 Processor and 146-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications. When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB of memory is provided. Table 9 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 9. Hardware for IBM x3650-M2 with Intel Quad-Core 5540 2.53-GHz Processor and 146-GB Hard Drives

Quantity

IBM Part Number (Worldwide)

Description

1

7947-PMK

IBM System x3650 M2

1

Standard

System Common planar for 1U/2U

1

Standard

Intel Xeon Processor E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)
or Intel Xeon Processor E5630 (2.53 GHz)

3

Standard

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

Standard

ServeRAID-MR10i SAS/SATA Controller

1

Standard

ServeRAID-MR10i Li-Ion Battery

1

Standard

8 HDD Enablement Kit

4

Standard

IBM 146GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

Standard

IBM 675W Redundant Power Supply

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

Standard

IBM Virtual Media Key

1

Standard

8GB USB Key for Cisco Unified Communications Solution

IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 300-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed for Cisco Unity and Cisco Unity Connection messaging products. No specific memory configuration is required as long as 4 GB of memory is provided. Table 10 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 10. Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 300-GB Hard Drives

Quantity

IBM Part Number (Worldwide)

Description

1

7947-PMJ

IBM System x3650 M2

1

Standard

System Common planar for 1U/2U

1

Standard

Intel Xeon Processor E5504 4C (2.0GHz 4MB L3 Cache 800MHz 80w)

2

Standard

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

Standard

ServeRAID-MR10i SAS/SATA Controller

1

Standard

ServeRAID-MR10i Li-Ion Battery

1

Standard

8 HDD Enablement Kit

2

Standard

IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

Standard

IBM 675W Redundant Power Supply

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

Standard

IBM Virtual Media Key

1

Standard

8GB USB Key for Cisco Unified Communications Solution

IBM x3650-M2 Server with Dual Xeon Nehalem Quad-Core E5540 2.53-GHz Processors and 300-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed only for Cisco Unified Contact Center and Cisco Unity and Cisco Unity Connection messaging products. The required processors are dual Intel Xeon Nehalem quad-core E5540 2.53-GHz processors. No specific memory configuration is required as long as 8 GB of memory is provided (note that some product versions may require more memory). Table 11 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 11. Hardware for IBM x3650-M2 with Intel Dual Quad-Core 5540 2.53-GHz Processor and 300-GB Hard Drives

Quantity

IBM Part Number (Worldwide)

Description

1

7947-PMH

IBM System x3650 M2

1

Standard

System Common planar for 1U/2U

1

Standard

Intel Xeon Processor E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)

1

Standard

Addl Intel Xeon Proc E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)

4

Standard

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

Standard

ServeRAID-MR10i SAS/SATA Controller

1

Standard

ServeRAID-MR10i Li-Ion Battery

1

Standard

8 HDD Enablement Kit

4

Standard

IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

Standard

IBM 675W Redundant Power Supply

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

Standard

IBM Virtual Media Key

1

Standard

8GB USB Key for Cisco Unified Communications Solution

IBM x3650-M2 Server (DC Power) with Single Quad-Core E5540 2.53-GHz Processor and 146-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications, and it is now available with DC power. When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB of memory is provided. Table 12 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 12. Hardware for IBM x3650-M2 (DC Power) with Intel Quad-Core 5540 2.53-GHz Processor and 146-GB Hard Drives

Quantity

IBM Part Number (Worldwide)

Description

1

7947-PNK

IBM System x3650 M2

1

Standard

IBM System x3650 M2 Base with DC power supply

1

Standard

System Common planar for 1U/2U

1

Standard

Intel Xeon Processor E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)

3

Standard

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

Standard

ServeRAID-MR10i SAS/SATA Controller

1

Standard

ServeRAID-MR10i Li-Ion Battery

1

Standard

8 HDD Enablement Kit

4

Standard

IBM 146GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

Standard

IBM 675W Redundant -48V DC Power Supply

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

Standard

IBM Virtual Media Key

1

Standard

8GB USB Key for Cisco Unified Communications Solution

IBM x3250 M2 with Single Intel Xeon E3110 3.0-GHz Processor

The IBM x3250 M2 is a high-performance server platform for today's unified communications applications. When configured properly for Cisco Unified Communications Manager, up to 1,500 devices on a single server and up to 4,000 devices per cluster can be supported. No specific memory configuration is required as long as 2 GB of memory is provided.
Table 13 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 13. Hardware for IBM x3250 M2 with Intel Xeon E3110 3.0-GHz Processor

Quantity

IBM Part Number (Worldwide)

Description

1

4190-PAF*

IBM System x3250 M2

1

Standard

Dual-Core Intel Xeon E3110 (3.0GHz 1333MHz FSB, 6MB L2)

1

Standard

Refresh 1 Base

2

Standard

1GB DDR2 800 SDRAM UDIMM Memory

1

Standard

Simple Swap SATA RAID Kit 3.5"

2

Standard

250GB 7200 RPM 3.5" Simple-Swap SATA II

1

Standard

Internal SATA RAID - Cabled Only, Setup by Customer

1

Standard

Riser Assembly PCI-E

1

Standard

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

* This single part number includes all the required components.

IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 146-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications. When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB of memory is provided. Table 14 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 14. Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 146-GB Hard Drives

Quantity

Part Number (IBM Reseller, Worldwide)

Part Number (IBM Direct, US/CAN/LA)

Part Number (IBM Direct, EMEA/AP)

Description

1

7947-22Y*

7947-AC1**

7947-CTO**

IBM System x3650 M2

1

Standard

5653

44E5176

System Common planar for 1U/2U

1

Standard

6990

46M1035

Intel Xeon Processor E5504 4C (2.0GHz 4MB L3 Cache 800MHz 80w)

2

44T1481***

3964

44T1471

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

43W4296

3571

43W4298

ServeRAID-MR10i SAS/SATA Controller

1

44E8826

5864

44E8840

ServeRAID-MR10i Li-Ion Battery

1

Standard

7553

44X0104

8 HDD Enablement Kit

2

42D0632

5537

42D0634

IBM 146GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

4162

44W3252

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

46M1075

2100

44X0147

IBM 675W Redundant Power Supply

1

Standard

5086

44X0138

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

3734

46M1131

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

46C7526

5080

43V6923

IBM Virtual Media Key

1

41Y8260

9298

41Y8273

8GB USB Key for Cisco Unified Communications Solution

* 7947-22Y is a worldwide Generally Available Variant (GAV) model number that is not orderable as listed and needs to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7947-22Y is 7947-22U. See the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Asia Pacific geographies follow the same pattern - substitute the last character with the country-specific designator.
** This model is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will automatically be configured and may also vary by country (power cords and documentation).
*** Recommended to remove the standard single-rank memory.

IBM x3650-M2 Server with Single Quad-Core E5540 2.53-GHz Processor and 146-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications. When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB of memory is provided. Table 15 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 15. Hardware for IBM x3650-M2 with Intel Quad-Core 5540 2.53-GHz Processor and 146-GB Hard Drives

Quantity

Part Number (IBM Reseller, Worldwide)

Part Number (IBM Direct, US/CAN/LA)

Part Number (IBM Direct, EMEA/AP)

Description

1

7947-62Y*

7947-AC1**

7947-CTO**

IBM System x3650 M2

1

Standard

5653

44E5176

System Common planar for 1U/2U

1

Standard

6993

46M1038

Intel Xeon Processor E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)

3

44T1481***

3964

44T1471

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

Standard

3571

43W4298

ServeRAID-MR10i SAS/SATA Controller

1

Standard

5864

44E8840

ServeRAID-MR10i Li-Ion Battery

1

Standard

7553

44X0104

8 HDD Enablement Kit

4

42D0632

5537

42D0634

IBM 146GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

4162

44W3252

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

46M1075

2100

44X0147

IBM 675W Redundant Power Supply

1

Standard

5086

44X0138

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

3734

46M1131

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

46C7526

5080

43V6923

IBM Virtual Media Key

1

41Y8260

9298

41Y8273

8GB USB Key for Cisco Unified Communications Solution

* 7947-62Y is a worldwide GAV model number that is not orderable as listed and needs to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7947-62Y is 7947-62U. See the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Asia Pacific geographies follow the same pattern - substitute the last character with the country-specific designator.
** This model is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will automatically be configured and may also vary by country (power cords and documentation).
*** Recommended to remove the standard single-rank memory.

IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 300-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed for Cisco Unity and Cisco Unity Connection messaging products. No specific memory configuration is required as long as 4 GB of memory is provided. Table 16 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 16. Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 300-GB Hard Drives

Quantity

Part Number (IBM Reseller, Worldwide)

Part Number (IBM Direct, US/CAN/LA)

Part Number (IBM Direct, EMEA/AP)

Description

1

7947-22Y*

7947-AC1**

7947-CTO**

IBM System x3650 M2

1

Standard

5653

44E5176

System Common planar for 1U/2U

1

Standard

6990

46M1035

Intel Xeon Processor E5504 4C (2.0GHz 4MB L3 Cache 800MHz 80w)

2

44T1481***

3964

44T1471

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

43W4296

3571

43W4298

ServeRAID-MR10i SAS/SATA Controller

1

44E8826

5864

44E8840

ServeRAID-MR10i Li-Ion Battery

1

Standard

7553

44X0104

8 HDD Enablement Kit

2

42D0637

5599

42D0639

IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

4162

44W3252

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

46M1075

2100

44X0147

IBM 675W Redundant Power Supply

1

Standard

5086

44X0138

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

3734

46M1131

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

46C7526

5080

43V6923

IBM Virtual Media Key

1

41Y8260

9298

41Y8273

8GB USB Key for Cisco Unified Communications Solution

* 7947-22Y is a worldwide GAV model number that is not orderable as listed and needs to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7947-22Y is 7947-22U. See the product specific Official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for A.P. Geographies follow the same pattern - substitute the last character with the country-specific designator.
** This is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will automatically be configured and may also vary by country (power cords and documentation).
*** Recommended to remove the standard single-rank memory.

IBM x3650-M2 Server with Dual Xeon Nehalem Quad-Core E5540 2.53-GHz Processors and 300-GB Hard Drives

The IBM x3650-M2 is a robust server solution designed only for Cisco Unified Contact Center and Cisco Unity and Cisco Unity Connection messaging products. The required processors are dual Intel Xeon Nehalem quad-core E5540 2.53-GHz processors. No specific memory configuration is required as long as 8 GB of memory is provided (note that some product versions may require more memory). Table 17 lists the components that must be configured and will ship when you order this system. Note that additional parts are required but are not listed. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 17. Hardware for IBM x3650-M2 with Intel Dual Quad-Core 5540 2.53-GHz Processor and 300-GB Hard Drives

Quantity

Part Number (IBM Reseller, Worldwide)

Part Number (IBM Direct, US/CAN/LA)

Part Number0020
(IBM Direct, EMEA/AP)

Description

1

7947-62Y*

7947-AC1**

7947-CTO**

IBM System x3650 M2

1

Standard

5653

44E5176

System Common planar for 1U/2U

1

Standard

6993

46M1038

Intel Xeon Processor E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)

1

46M1084

7752

46M1042

Addl Intel Xeon Proc E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)

4

44T1481***

3964

44T1471

2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM

1

Standard

3571

43W4298

ServeRAID-MR10i SAS/SATA Controller

1

Standard

5864

44E8840

ServeRAID-MR10i Li-Ion Battery

1

Standard

7553

44X0104

8 HDD Enablement Kit

4

42D0637

5599

42D0639

IBM 300GB 10K 6Gbps SAS 2.5" SFF Slim-HS HDD

1

Standard

4162

44W3252

UltraSlim Enhanced SATA CD-RW/DVD-ROM Combo

1

46M1075

2100

44X0147

IBM 675W Redundant Power Supply

1

Standard

5086

44X0138

IBM System x3650 M2 PCI-Express (2x8) Riser Card

1

Standard

3734

46M1131

IBM System x3650 M2 PCI-Express (2x8) Riser Card 2

1

46C7526

5080

43V6923

IBM Virtual Media Key

1

41Y8260

9298

41Y8273

8GB USB Key for Cisco Unified Communications Solution

* 7947-62Y is a worldwide GAV model number that is not orderable as listed and needs to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7947-62Y is 7947-62U. See the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Asia Pacific geographies follow the same pattern - substitute the last character with the country-specific designator.
** This model is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will automatically be configured and may also vary by country (power cords and documentation).
*** Recommended to remove the standard single-rank memory.

IBM x3650 with Single Intel 5140 2.33-GHz Processor and 146-GB Hard Drives

The IBM x3650 is a robust server solution designed for Cisco Unified Communications Software applications. When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 2 GB of memory is provided (note that some product versions may require more memory).
Note that IBM has discontinued sale of this configuration. Table 18 is only for reference to help you identify which configuration you have deployed.

Table 18. Hardware for IBM x3650 with Intel 5140 2.33-GHz Processor and 146-GB Hard Drives

Quantity

IBM Part Number (North America)

IBM Part Number (Outside North America)

Description

1

7979-AC1

7979-CTO

IBM System x3650

1

1325

41Y8981

Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

2* or 4**

0542

39M5783

1GB PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

1670

25R8077

IBM ServeRAID 8k SAS Controller

2

5534

43X0826

IBM 146GB 2.5" 10K RPM SAS Hot-Swap HDD

1

4144

32R2784

CD-RW/DVD Combo V Ultrabay Enhanced

1

1968

40K0029

835 Watt Redundant Hot-Swap Power Supply Option

1

4334

40K0028

PCI-Express Riser Card

1

1606

39R9504

Remote Supervisor Adapter II Slimline

* Quantity 2 required for Cisco Unified Communications Manager models MCS-7835-I2-IPC2, MCS-7835-I2-CMA2, MCS 7835 I2 CMB1, MCS-7835-I2-CMB2, and MCS-7835-I2-CMC1 as well as Cisco Contact Center models MCS-7835-I2-CCX2 and MCS 7835-I2-CCE2
** Quantity 4 required for Cisco Unity Connection models MCS 7835I2-K9-UCA1A and MCS 7835I2-K9-UCB1

IBM x3650 with Dual Intel 5140 2.33-GHz Processors and 146-GB Hard Drives

The IBM x3650 dual-processor configured server is a robust server solution designed for Cisco Unified Communications Software applications. When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB of memory is provided (note that some product versions may require more memory).
Note that IBM has discontinued sale of this configuration. Table 19 is only for reference to help you identify which configuration you have deployed.

Table 19. Hardware for IBM x3650 with Dual Intel 5140 2.33-GHz Processors and 146-GB Hard Drives

Quantity

IBM Part Number (North America)

IBM Part Number (Outside North America)

Description

1

7979-AC1

7979-CTO

IBM System x3650

1

1325

41Y8981

Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

1

1383

41Y4266

Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

4

0542

39M5783

1GB PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

1670

25R8077

IBM ServeRAID 8k SAS Controller

4

5534

43X0826

IBM 146GB 2.5" 10K RPM SAS Hot-Swap HDD

1

4144

32R2784

CD-RW/DVD Combo V Ultrabay Enhanced

1

1968

40K0029

835 Watt Redundant Hot-Swap Power Supply Option

1

4334

40K0028

PCI-Express Riser Card

1

1606

39R9504

Remote Supervisor Adapter II Slimline

IBM x3650 Dual Quad-Core Intel E5345 2.33-GHz Processors with 146-GB Hard Drives

The IBM x3650 dual-processor quad-core configured server is a robust server solution designed for Cisco Unity and Cisco Unified Contact Center applications. The required processors are dual Intel Xeon Quad-Core 5345 2.33-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided (note that some product versions may require more memory).
Note that IBM has discontinued sale of this configuration. Tables 20 and 21 are only for reference to help you identify which configuration you have deployed.

Table 20. Hardware Variation 1 for Dual IBM x3650 Quad-Core Intel E5345 2.33-GHz Processors with 146-GB Hard Drives (Equivalent of Cisco MCS7845-I2-ECS3 and MCS-7845-I2-CCE3)

Quantity

IBM Part Number (North America)

IBM Part Number (Outside North America)

Description

1

7979-AC1*

7979-CTO*

IBM System x3650

1

2816

43W5827

Quad-Core Intel Xeon Processor E5345 (2.33GHz 8MB L2 1333MHz 80w)

1

3457

43W5819

Additional Quad-Core Intel Xeon Processor E5345 (2.33GHz 1333MHz 80w)

4

0542

39M5783

1GB PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz

1

1670

25R8077

IBM ServeRAID-8k SAS Controller

4

5534

43X0826

146GB 10K 2.5" Hot-Swap SAS HDD

1

4144

32R2784

CD-RW/DVD Combo V Ultrabay Enhanced

1

1968

40K0029

xSeries 835W Redundant Power Option

1

4334

40K0028

PCI-Express Riser Card

1

1606

39R9504

Remote Supervisor Adapter II Slimline

* This IBM build-to-order model must be configured with two Intel E5345 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four 146-GB hot-swap single-attachment-station (SAS) drives, and all the other components itemized in Table 20. Note: Additional parts are required but are not listed in the table. These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).

Table 21. Hardware Variation 2 for Dual IBM x3650 Quad-Core Intel E5345 2.33-GHz Processors with 146-GB Hard Drives (Equivalent of Cisco MCS7845-I2-ECS4 and MCS-7845-I2-CCE4)

Quantity

IBM Part Number (North America)

IBM Part Number (Outside North America)

Description

1

7979-AC1*

7979-CTO*

IBM System x3650

1

2816

43W5827

Quad-Core Intel Xeon Processor E5345 (2.33GHz 8MB L2 1333MHz 80w)

1

3457

43W5819

Additional Quad-Core Intel Xeon Processor E5345 (2.33GHz 1333MHz 80w)

4

0542

39M5783

1GB PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz

1

1670

25R8077

IBM ServeRAID-8k SAS Controller

8

5534

43X0826

146GB 10K 2.5" Hot-Swap SAS HDD

1

4144

32R2784

CD-RW/DVD Combo V Ultrabay Enhanced

1

1968

40K0029

xSeries 835W Redundant Power Option

1

4334

40K0028

PCI-Express Riser card

1

1606

39R9504

Remote Supervisor Adapter II Slimline

* This IBM build-to-order model must be configured with two Intel E5345 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, eight 146-GB hot-swap SAS drives, and all the other components itemized in Table 21. Note: Additional parts are required but are not listed in Table 21. These parts will automatically be configured and may also vary by country (power cords, documentation).
You can add additional memory to the x3650 systems using the following parts:
46C7418: 2GB (2x1GB) Single Rank PC2-5300 CL5 ECC FBD 667MHz Low Power Memory
46C7419: 4GB (2x2GB) Dual Rank PC2-5300 CL5 ECC FBD 667MHz Low Power Memory
46C7420: 8GB (2x4GB) Quad Rank PC2-5300 CL5 ECC FBD 667MHz Low Power Memory

IBM x3250 M2 with Single Intel Xeon E3110 3.0-GHz Processor

The IBM x3250 M2 is a high-performance server platform for today's unified communications applications. When configured properly for Cisco Unified Communications Manager, up to 1,500 devices on a single server and up to 4,000 devices per cluster can be supported. No specific memory configuration is required as long as 2 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 22 is only for reference to help you identify which configuration you have deployed.

Table 22. Hardware for IBM x3250 M2 with Intel Xeon E3110 3.0-GHz Processor

Quantity

IBM Part Number (North America)

IBM Part Number (Outside North America)

Description

1

4190-AC1* or
4194-AC1

4190-CTO* or
4194-CTO

IBM System x3250 M2

1

3650

44R5766

Dual-Core Intel Xeon E3110 (3.0GHz 1333MHz FSB, 6MB L2)

1

2749

44X1885

Refresh 1 Base

2

3961

46C7424

1GB DDR2 800 SDRAM UDIMM Memory

1

2773

43V7424

Simple Swap SATA RAID Kit 3.5"

2

5292

39M4509

250GB 7200 RPM 3.5" Simple-Swap SATA II

1

9011

32P8874

Internal SATA RAID - Cabled only, Setup by Customer

1

4911

44T2004

Riser assembly PCI-E

1

4162

44W3252

UltraSlim Enhanced CD-RW/DVD-ROM Combo

* The 4190 machine time carries a 1-year limited parts and labor warranty. The 4194 machine type carries a 3-year limited parts and labor warranty.

IBM x3650 Single Intel 5140 2.33-GHz Processor with 73-GB Hard Drives

This server configuration is identical to the IBM x3650 server with a single Intel 5140 2.33-GHz processor and 146-GB hard drives, except that this configuration uses 73-GB hard drives and supports different versions of the IP Telephony OS and Cisco Unified Communications Manager. It is the configuration equivalent of the Cisco MCS 7835-I2.
Note that IBM has discontinued sale of this configuration. Table 23 is only for reference to help you identify which configuration you have deployed.

Table 23. Hardware for IBM x3650 with Intel 5140 2.33-GHz Processor with 73-GB Hard Drives

Quantity

IBM Part Number (North America)

IBM Part Number (Outside North America)

Description

1

7979-AC1*

7979-CTO*

IBM System x3650

1

1325

41Y8981

Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

2

0542

39M5783

1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

1670

25R8077

IBM ServeRAID 8k SAS Controller

2

5159

40K1084

IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD

1

4144

32R2784

CD-RW/DVD Combo V Ultrabay Enhanced

1

1968

40K0029

835 Watt Redundant Hot-Swap Power Supply Option

1

4334

40K0028

PCI-Express Riser Card

1

1606

39R9504

Remote Supervisor Adapter II Slimline

* This IBM build-to-order model must be configured with the Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73-GB hot-swap SAS drives, and all the other components itemized in Table 23. Note: Additional parts are required but are not listed in Table 23. These parts will automatically be configured and may also vary by country (power cords and documentation).

IBM x3650 with Dual Intel 5140 2.33-GHz Processors with 73-GB Hard Drives

This server configuration is identical to the IBM x3650 with dual Intel 5140 2.33-GHz processors with 146-GB hard drives, except that this configuration uses 73-GB hard drives and supports different versions of the IP Telephony OS and Cisco Unified Communications Manager. It is the configuration equivalent of the Cisco MCS 7845-I2.
Note that IBM has discontinued sale of this configuration. Table 24 is only for reference to help you identify which configuration you have deployed.

Table 24. Hardware for IBM x3650 with Dual Intel 5140 2.33-GHz Processors

Quantity

IBM Part Number (North America)

IBM Part Number (Outside North America)

Description

1

7979-AC1*

7979-CTO*

IBM System x3650

1

1325

41Y8981

Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

1

1383

41Y4266

Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

4

0542

39M5783

1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

1670

25R8077

IBM ServeRAID 8k SAS Controller

4

5159

40K1084

IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD

1

4144

32R2784

CD-RW/DVD Combo V Ultrabay Enhanced

1

1968

40K0029

835 Watt Redundant Hot-Swap Power Supply Option

1

4334

40K0028

PCI-Express Riser card

1

1606

39R9504

Remote Supervisor Adapter II Slimline

* This IBM build-to-order model must be configured with dual Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four 73-GB hot-swap SAS drives, and all the other components itemized in Table 24. Note: Additional parts are required but are not listed in Table 24. These parts will automatically be configured and may also vary by country (power cords and documentation).

IBM xSeries 306 with Intel Pentium 4 Xeon 3.06-GHz Processor

The IBM xSeries 306 is a robust server solution designed for Cisco Unified Communications Software applications. As many as 1,000 Cisco Unified IP Phones can be supported by a single x306 server running Cisco Unified Communications Manager. When clustered properly, as many as 4,000 users can be supported. The required processor is an Intel Pentium 4 Xeon 3.06-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 25 is only for reference to help you identify which configuration you have deployed.

Table 25. Hardware for IBM xSeries 306 with Intel Pentium 4 Xeon 3.06-GHz Processor

Quantity

IBM Part Number

Description

1

8836-2SU

IBM x306 Server 3.0GHz/800MHz FSB SATA

1

06P4054

512MB PC2700 ECC DDR SDRAM UDIMM

1

22P7047

8X Slim line DVD-ROM

1

73P8002

80GB 7200-rpm SATA HDD

IBM xSeries 306 with Intel Pentium 4 3.4-GHz Processor

This processor requires the Cisco OS 2000.4.1b, which shipped on October 3, 2005.
The IBM xSeries 306 is a high-performance server platform for today's unified communications applications. It supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered properly. The required processor is an Intel Pentium 4 3.4-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 26 is only for reference to help you identify which configuration you have deployed.

Table 26. Hardware for IBM xSeries 306 with Intel Pentium 3.4-GHz Processor

Quantity

IBM Part Number

Description

1

8836-2SU

IBM x306 Server 3.0GHz/800MHz FSB SATA

1

06P4054

512MB PC2700 ECC DDR SDRAM UDIMM

1

22P7047

8X Slim line DVD-ROM

1

73P8002

80GB 7200-rpm SATA HDD

* Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8836-5SY is 8836-5SU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model numbers.
GAV-to-MTM mapping for Latin America and Asia Pacific geographies: 1Mx > 11X, 1Sx > 15X, 2Mx > 21X, 2Sx > 25X, 4MY > 41X, 4SY > 45X, 5MY > 51X, and 5SY > 55X. Latin America and Asia Pacific models 4xX and 5xY will need the last digit (X) substituted with a country-specific designator. For example, model 31X may become 31L. Please note that Asia Pacific and Latin America models of the 8836-5SY are not supported on OS 2000.4.1b. For those countries, use the x306 3.06-GHz 8836-2SY model listed and OS 2000.2.7.

IBM xSeries 306m with Intel Pentium D 2.8-GHz Processor

This processor requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications Manager 5.0.3. The IBM xSeries 306m is a high-performance server platform for today's unified communications applications. It supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered properly. The required processor is an Intel Pentium D 2.8-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server is the configuration equivalent of the Cisco 7825-I2-IPC1.
Note that IBM has discontinued sale of this configuration. Table 27 is only for reference to help you identify which configuration you have deployed.

Table 27. Hardware for IBM xSeries 306m with Intel Pentium D 2.8-GHz Processor

Quantity

IBM Part Number

Description

1

8849-G2Y or 8491-G2Y*

x306m, Intel PD 2.8GHz/800MHz, 2 x 2MB Layer 2, 2x 512MB, O/Bay SS S-ATA, 24x-10x, 350W p/s, Rack

2

30R5148

512MB PC2-4200 (1 x 512MB) ECC DDR2 SDRAM DIMM

1

39Y6824

IBM CD-RW/DVD-ROM Combo Ultrabay Enhanced Drive

2

39M4500

80GB S-ATA Simple-swap 3Gb/s HDD

* Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8849-G2Y is 8849-G2U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Latin America and Asia Pacific geographies follow the same pattern. Substitute the last character with the country-specific designator.

IBM xSeries 306m with Intel 950 3.4-GHz Processor

This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This server is not supported in Cisco Unified Communications Manager 5.0.
The IBM xSeries 306m is a high-performance server platform for today's unified communications applications. It supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered properly. The required processor is an Intel 950 3.4-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7825-I2-IPC2.
Note that IBM has discontinued sale of this configuration. Table 28 is only for reference to help you identify which configuration you have deployed.

Table 28. Hardware for IBM xSeries 306m with Intel 950 3.4-GHz Processor

Quantity

IBM Part Number

Description

1

8849-K2Y or
8491-K2Y* or
8849-AC1** or
8491-AC1**

Express x306m, Intel PD 950, 3.4GHz/800MHz, 4MB Layer 2, 2 x 512MB, O/Bay SS S-ATA, 24x-10x, 350W p/s, Rack

2

30R5148

512MB PC2-4200 (1 x 512MB) ECC DDR2 SDRAM DIMM

1

39Y6824

IBM CD-RW/DVD-ROM Combo Ultrabay Enhanced Drive

2

39M4500

80GB S-ATA Simple-swap 3Gb/s HDD

* Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8849-K2Y is 8849-K2U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Latin America and Asia Pacific geographies follow the same pattern. Substitute the last character with the country-specific designator.
** This IBM build-to-order model must be configured with an Intel 950 3.4-GHz processor, 2-GB RAM, two 80-GB simple-swap Serial ATA (SATA) drives, and IBM CD-RW/DVD-ROM Combo Ultrabay Enhanced Drive. Use of this model requires an IBM technician to reset the MTM to 8849-K2Y if Cisco Unified Communications Manager 5.1 is being installed. The 8849 machine type carries a 1-year limited parts and labor warranty. The 8491 machine type carries a 3-year limited parts and labor warranty.

IBM x3250 with Intel 3050 Xeon 2.13-GHz Processor

This processor requires Cisco Windows OS 2000.4.5 or OS 2003.1.2 or Cisco Unified Communications Manager 6.0.1. This server is not supported in Cisco Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco MCS 7825-I3.
The IBM x3250 is a high-performance server platform for today's unified communications applications. It supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered properly. The required processor is an Intel Dual-Core 3050 Xeon 2.13-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 29 is only for reference to help you identify which configuration you have deployed.

Table 29. Non-Country-Specific Hardware for IBM x3250 with Intel 3050 Xeon 2.13-GHz Processor*

Quantity

IBM Type-Model Feature

Description

1

4364-AC1** or 4365-AC1

IBM System x3250

1

0992

CPU Retention Module

1

1128

x3250 Revision 1 System Planar

1

1272

Dual Core Intel Xeon 3050 (2.13GHz/2M L2)

2

1903

1GB DDR2 667 SDRAM DIMM Memory

1

2007

BIOS GBM

1

2046

Front Bezel

1

2088

3.5inch DASD Cage

2

2091

SATA Filler 3.5inch

1

2268

Base Hardware

1

4144

CDRW/DVD Combo V UltraBay Enhanced

1

4256

Rack Mount Kit

1

4367

Simple Swap SATA RAID Kit

2

5291

160GB 7200 RPM 3.5inch Simple Swap SATA HDD

1

9011

Internal RAID - Cabled Only - Setup by Customer

* This table lists common hardware for the supported server model and does not include power cables and country-specific items. The IBM build-to-order tool should automatically include the required country-specific parts for the order. This model must be configured with an Intel Dual-Core 3050 Xeon 2.13-GHz processor, 2-GB RAM, two 160-GB simple-swap SATA drives, and an IBM CD-RW/DVD-ROM Combo Ultrabay Enhanced Drive.
** The 4364 machine time carries a 1-year limited parts and labor warranty. The 4365 machine type carries a 3-year limited parts and labor warranty.

IBM xSeries 330 with Intel Pentium III 800-MHz Processor

The xSeries 330 is a high-performance server platform designed for today's unified communications applications. When clustered properly, 2,000 users can be supported. The minimum required processor is an Intel Pentium III 800-MHz processor. No specific memory configuration is required as long as 512 MB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 30 is only for reference to help you identify which configuration you have deployed.

Table 30. Hardware for IBM xSeries 330 with Intel Pentium III 800-MHz Processor

Quantity

IBM Part Number

Description

1

865451Y

IBM x330 Server 1000MHz/256 256/Open 24X

1

37L7205

18.2 Ultra 160 SCSI HS SL HD

1

10K0020

256MB ECC SDRAM RDIMM Memory

1

06P4792

xSeries Cable Chain Tech Kit

Other supported processors are listed as follows. Replace part number 865451Y with one of the following.

1

865411Y

IBM x330 800MHz/256 256/Open 24X

1

865431Y

IBM x330 866MHz/256 256/Open 24X

1

865441Y

IBM x330 933MHz/256 256/Open 24X

IBM xSeries 330 with Intel Pentium III 1.2-GHz Processor

The IBM xSeries 330 is a high-performance server platform designed for today's unified communications applications. As many as 500 Cisco Unified IP Phones can be supported on a single x330 server running Cisco Unified Communications Manager. When clustered properly, 2,000 users can be supported.
Note that IBM has discontinued sale of this configuration. Table 31 is only for reference to help you identify which configuration you have deployed.

Table 31. Hardware for IBM xSeries 330 with Intel Pentium III 1.2-GHz Processor

Quantity

IBM Part Number

Description

1

867431X

x330 1.26GHz/133 256M

1

10K0020

256MB DIMM

1

06P5754

18GB Ultra 160 10K Wap HD

1

06P4792

Cable Chain Kit

IBM xSeries 340 with Intel Pentium III 1-GHz Processor

The IBM xSeries 340 is a robust server solution designed for Cisco Unified Communications Software applications. When clustered properly, 10,000 users can be supported. The required processor is an Intel Pentium III 1-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 32 is only for reference to help you identify which configuration you have deployed.

Table 32. Hardware for IBM xSeries 340 with Intel Pentium III 1-GHz Processor

Quantity

IBM Part Number

Description

1

86566RY

IBM x340 1000MHz/256 128/Open 24X

2

37L7205

18.2 Ultra 160 SCSI HS SL HD

1

10K0018

128MB ECC SDRAM RDIMM

1

10K0020

256MB ECC SDRAM RDIMM

1

10K0022

512MB ECC SDRAM RDIMM

1

06P5740

ServerRAID-4Lx Ultra 160 SCSI

1

37L6880

270W Redundant Power Supply

1

00N7991

20/40GB DDS/4 4-mm Int Tape Drive (Optional)

1

86566RY

IBM x340 1000MHz/256 128/Open 24X

IBM xSeries 342 with Intel Pentium III 1.26-GHz Processor

The IBM xSeries 342 is a robust server solution designed for Cisco Unified Communications Software applications. When clustered properly, 10,000 users can be supported. The required processor is an Intel Pentium III 1.26-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 33 is only for reference to help you identify which configuration you have deployed.

Table 33. Hardware for IBM xSeries 342 with Intel Pentium III 1.26-GHz Processor

Quantity

IBM Part Number

Description

1

86694RX

IBM x342 1.26GHz/133MHz

2

33L3324

512MB DIMM

2

06P5754

18GB Ultra 160 10K Hot-Swap HD

1

06P5740

ServeRAID 4Lx

1

37L6880

270W Hot-Swap Power Supply

1

00N7991

20/40GB DAT) Drive (Optional)

1

10K2340

Media Bay Tray/LVD Cable Kit (Required for Tape Drive)

IBM xSeries 345 with Intel Pentium 4 Xeon 2.4-GHz Processor

The xSeries 345 is a robust server solution designed for Cisco Unified Communications Software applications. As many as 2,500 Cisco Unified IP Phones can be supported by a single x345 server running Cisco Unified Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required processor is an Intel Pentium 4 Xeon 2.4-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 34 is only for reference to help you identify which configuration you have deployed.

Table 34. Hardware for IBM xSeries 345 with Intel Pentium 4 Xeon 2.4-GHz Processor

Quantity

IBM Part Number

Description

1

867031X

IBM x345 512MB, CD-ROM

2

33L5037

256MB DIMM

1

25P3492

ServeRAID-5i SCSI Controller

2

06P5755

36GB Ultra 160 10K Hot-Swap HD

1

22P7047

8X Max Slimline DVD-ROM Drive

1

59P4057

350W H/Swap Redundant Power Supply

IBM xSeries 345 with Intel Pentium 4 Xeon 3.06-GHz Processor

The xSeries 345 is a robust server solution designed for Cisco Unified Communications Software applications. As many as 2,500 Cisco Unified IP Phones can be supported by a single x345 server running Cisco Unified Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required processor is an Intel Pentium 4 Xeon 3.06-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 35 is only for reference to help you identify which configuration you have deployed.

Table 35. Hardware for IBM xSeries 345 with Intel Pentium 4 Xeon 3.06-GHz Processor

Quantity

IBM Part Number

Description

1

867071X or 8670M1X

x345 Xeon 3.06GHz/533MHz, 512KB, 512MB, OB, Ultra 320

2

33L5037

256MB DIMM

1

25P3492 or 13N2190

ServeRAID-5i SCSI Controller or ServeRAID-6i+

2

32P0726

36GB Ultra 320 10K Hot-Swap HD

1

22P7047

8X Max Slimline DVD-ROM Drive

1

74P4965

514W H/Swap Power Supply (Non-North American Part Number is 74P4955)

IBM xSeries 346 with Intel Pentium Xeon 3.4-GHz Processor

This processor requires Cisco OS 2000.2.7.
The IBM xSeries 346 is a robust server solution designed for Cisco Unified Communications Software applications. As many as 2,500 Cisco Unified IP Phones can be supported by a single x346 server running Cisco Unified Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required processor is an Intel Pentium Xeon 3.4-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 36 is only for reference to help you identify which configuration you have deployed.

Table 36. Hardware for IBM xSeries 346 with Intel Pentium Xeon 3.4-GHz Processor

Quantity

IBM Part Number

Description

1

8840-31Y*

IBM x346, Xeon 3.4GHz/800MHz, 1MB Layer 2, 2 x 512MB, O/Bay U320 SCSI, 625W p/s, rack

1

73P3522

2 x 512MB PC2-3200 ECC DDR2 Non Chipkill SDRAM RDIMM Kit

1

71P8642

IBM ServeRAID 7k Adapter Option

2

90P1319 or
90P1381

IBM 73GB Hot-Swap U320 15K SCSI Drive

IBM 73GB Hot-Swap U320 15K SCSI Drive

1

26K5097

IBM xSeries 625W Hot-Swap Power Supply (North America)

(26K5098 is the Worldwide Part Number, Which Ships without a Line Cord)

* Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8840-31Y is 8840-31U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character with the country-specific designator.

IBM xSeries 346 with Intel Pentium Xeon 3.4-GHz Processor

This processor requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications Manager 5.0.3. The IBM xSeries 346 is a robust server solution designed for Cisco Unified Communications Software applications. As many as 2500 Cisco Unified IP Phones can be supported by a single x346 server running Cisco Unified Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required processor is an Intel Pentium Xeon 3.4-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7835-I1.
Note that IBM has discontinued sale of this configuration. Table 37 is only for reference to help you identify which configuration you have deployed.

Table 37. Hardware for IBM xSeries 346 with Intel Pentium Xeon 3.4-GHz Processor

Quantity

IBM Part Number

Description

1

8840-3RY* or
8840-AC1**

IBM x346, Xeon 3.4GHz/800MHz, 2MB Layer 2, 2 x 512MB, O/Bay U320 SCSI, 625W p/s, Rack

1

39M5818

2 x 512MB PC2-3200 ECC DDR2 Non Chipkill SDRAM RDIMM Kit

1

39R8800

IBM ServeRAID 7k Adapter Option

2

40K1027

IBM 73.4GB Hot-Swap U320 15K SCSI Drive

1

40K1915

IBM xSeries 625W Hot-Swap Power Supply

* Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8840-3RY is 8840-3RU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character with the country-specific designator.
** This IBM build-to-order model must be configured with an Intel Xeon 3.4-GHz or 2-MB Layer 2 processor, 2-GB RAM, ServeRAID 7k, two 73-GB 15k hot-swap Small Computer System Interface (SCSI) drives, and a redundant power supply.

IBM xSeries 345 with Dual Intel Xeon 3.06-GHz Processors

The x345 dual-processor configured server is a robust server solution designed for Cisco Unified Communications Software applications. As many as 7,500 Cisco Unified IP Phones can be supported on a single server running Cisco CallManager 3.3 or later and any version of Cisco Unified Communications Manager. The required processors are dual Intel Xeon 3.06-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 38 is only for reference to help you identify which configuration you have deployed.

Table 38. Hardware for IBM xSeries 345 with Dual Intel Xeon 3.06-GHz Processors

Quantity

IBM Part Number

Description

1

8670M1X

IBM x345 Xeon 3.06GHz/533MHz, 512KB, 512MB, OB, Ultra 320

1

02R1988

3.06GHz/533MHz, 512-KB Upgrade with Intel Xeon

4

33L5039

1GB PC2100 CL2.5 ECC DDR SDRAM RDIMM DIMM

1

13N2190

ServeRAID-6i+ SCSI Controller

4

32P0727

73.4GB 10k-RPM Ultra320 SCSI HS SL HDD

1

22P7047

8X Max Slimline DVD-ROM Drive

1

74P4965

514W H/Swap Redundant Power Supply

IBM xSeries 346 with Dual Intel Xeon 3.4-GHz Processors

This processor requires Cisco OS 2000.2.7.
The IBM x346 dual-processor configured server is a robust server solution designed for Cisco Unified Communications Software applications. As many as 7,500 Cisco Unified IP Phones can be supported on a single server running Cisco Unified Communications Manager. The required processors are dual Intel Xeon 3.4-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 39 is only for reference to help you identify which configuration you have deployed.

Table 39. Hardware for IBM xSeries 346 with Dual Intel Xeon 3.4-GHz Processors

Quantity

IBM Part Number

Description

1

8840-31Y*

IBM x346, Xeon 3.4GHz/800MHz, 1MB Layer 2, 2 x 512MB, O/Bay HS U320 SCSI, 625W p/s, Rack

1

13N0684

3.4GHz/800MHz, 1MB Layer 2 Cache Xeon Processor

3

73P3522

2 x 512MB PC2-3200 ECC DDR2 Non-Chipkill SDRAM RDIMM Kit

1

71P8642

IBM ServeRAID 7k Adapter Option

4

90P1319 or
90P1381

IBM 73GB Hot-Swap U320 15K SCSI Drive

IBM 73GB Hot-Swap U320 15K SCSI Drive

1

26K5097

IBM xSeries 625W Hot-Swap Power Supply (North America)

(26K5098 is the Worldwide Part Number, Which Ships without a Line Cord)

* Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8840-31Y is 8840-31U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character with the country-specific designator.

IBM xSeries 346 with Dual Intel Xeon 3.4-GHz Processors

This processor requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications Manager 5.0.3. The IBM x346 dual-processor configured server is a robust server solution designed for Cisco Unified Communications Software applications. As many as 7,500 Cisco Unified IP Phones can be supported on a single server running Cisco CallManager 3.3 or later or any version of Cisco Unified Communications Manager. The required processors are dual Intel Xeon 3.4-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7845-I1.
Note that IBM has discontinued sale of this configuration. Table 40 is only for reference to help you identify which configuration you have deployed.

Table 40. Hardware for IBM xSeries 346 with Dual Intel Xeon 3.4-GHz Processors

Quantity

IBM Part Number

Description

1

8840-3RY* or 8840-AC1**

IBM x346, Xeon 3.4GHz/800MHz, 2MB Layer 2, 2 x 512MB, O/Bay HS U320 SCSI, 625W p/s, rack

1

40K2506

3.4GHz/800MHz, 2MB Layer 2 Cache Xeon Processor

1

39M5818

2 x 512MB PC2-3200 ECC DDR2 Non-Chipkill SDRAM RDIMM Kit

1

39M5809

2 x 1GB PC2-3200 ECC DDR2 SDRAM RDIMM Kit

1

39R8800

IBM ServeRAID 7k Adapter Option

4

40K1027

IBM 73.4GB Hot-Swap U320 15K SCSI Drive

1

40K1915

IBM xSeries 625W Hot-Swap Power Supply (North America)

* Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8840-3RY is 8840-3RU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character with the country-specific designator.
** This IBM build-to-order model must be configured with two Intel Xeon 3.4-GHz or 2-MB Layer 2 processors, 4-GB RAM, ServeRAID 7k, four 73-GB 15k hot-swap SCSI drives, and a redundant power supply.

IBM x3650 with Intel Xeon 5140 2.33-GHz Processor

This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This server is not supported in Cisco Unified Communications Manager 5.0.
The IBM x3650 is a robust server solution designed for Cisco Unified Communications Software applications. As many as 2,500 Cisco Unified IP Phones can be supported by a single x3650 server running Cisco Unified Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required processor is an Intel Xeon 5140 2.33-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7835-I2.
Note that IBM has discontinued sale of this configuration. Table 41 is only for reference to help you identify which configuration you have deployed.

Table 41. Hardware for IBM x3650 with Intel Xeon 5140 2.33-GHz Processor

Quantity

IBM Part Number

Description

1

7979-5AY* or 7979-AC1**

Express x3650, Dual-Core Intel Xeon 5140 2.33GHz/1333MHz, 2x2MB, 2X512MB Chipkill, O/Bay 2.5in HS SAS, SR-8k-1, CD-RW/DVD, 835W p/s

1

39M5782

1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

25R8064

IBM ServeRAID 8k SAS Controller

2

40K1052

IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD

1

40K1905*

835 Watt Hot-Swap Power Supply Option (US)

1

40K1908

PCI Riser Card PCI-X Option

1

39Y9566

Remote Supervisor Adapter II Slimline Refresh 1

* Model numbers provided are worldwide GAV model numbers, which are not orderable as listed and need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7979-5AY is 7979-5AU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character with the country-specific designator. For countries using a worldwide power supply, use IBM part number 40K1906 instead of 40K1905.
** This IBM build-to-order model must be configured with an Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73-GB hot-swap SAS drives, and all the other components itemized in Table 41.

IBM x3650 with Intel Xeon 5140 2.33-GHz Processor (Special Order)

This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This server is not supported in Cisco Unified Communications Manager 5.0.
The IBM x3650 is a robust server solution designed for Cisco Unified Communications Software applications. As many as 2,500 Cisco Unified IP Phones can be supported by a single x3650 server running Cisco Unified Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required processor is an Intel Xeon 5140 2.33-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server is the configuration equivalent of the Cisco 7835-I2.
Note that IBM has discontinued sale of this configuration. Tables 42 and 43 are only for reference to help you identify which configuration you have deployed.
Use Table 42 for systems ordered within North America and Table 43 for systems ordered outside of North America.

Table 42. Hardware for IBM x3650 with Intel Xeon 5140 2.33-GHz Processor

Quantity

IBM Part Number

Description

1

7979-AC1*

IBM System x3650

1

1325

Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

2

0542

1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

1670

IBM ServeRAID 8k SAS Controller

2

5159

IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD

1

4144

CD-RW/DVD Combo V Ultrabay Enhanced

1

1968

835 Watt Redundant Hot-Swap Power Supply Option

1

4334

PCI-Express Riser Card

1

1606

Remote Supervisor Adapter II Slimline

* This IBM build-to-order model must be configured with Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73-GB hot-swap SAS drives, and all the other components itemized in Table 42. Note: Additional parts are required but are not listed in Table 42. These parts will automatically be configured and may also vary by country (power cords and documentation).

Table 43. Hardware for IBM x3650 with Intel Xeon 5140 2.33-GHz Processor

Quantity

IBM Part Number

Description

1

7979-CTO*

IBM System x3650

1

41Y8981

Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

2

39M5783

1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

25R8077

IBM ServeRAID 8k SAS Controller

2

40K1084

IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD

1

32R2784

CD-RW/DVD Combo V Ultrabay Enhanced

1

40K0029

835 Watt Redundant Hot-Swap Power Supply Option

1

40K0028

PCI-Express Riser Card

1

39R9504

Remote Supervisor Adapter II Slimline

* This IBM build-to-order model must be configured with an Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73-GB hot-swap SAS drives, and all the other components itemized in Table 43. Note: Additional parts are required but are not listed in Table 43. These parts will automatically be configured and may also vary by country (power cords and documentation).

IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors

This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This server is not supported in Cisco Unified Communications Manager 5.0.
The IBM x3650 dual-processor configured server is a robust server solution designed for Cisco Unified Communications Software applications. As many as 7,500 Cisco Unified IP Phones can be supported on a single server running Cisco CallManager 3.3 or later or any version of Cisco Unified Communications Manager. The required processors are dual Intel Xeon 5140 2.33-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7845-I2.
Note that IBM has discontinued sale of this configuration. Table 44 is only for reference to help you identify which configuration you have deployed.

Table 44. Hardware for IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors

Quantity

IBM Part Number

Description

1

7979-5AY* or 7979-AC1**

Express x3650, Dual-Core Intel Xeon 5140 2.33GHz/1333MHz, 2x2MB, 2X512MB Chipkill, O/Bay 2.5in HS SAS, SR-8k-1, CD-RW/DVD, 835W p/s

1

40K1234

Dual-Core Intel Xeon Processor 5140 2.33GHz/1333MHz FSB, 2x2MB L2

1

39M5782

1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

39M5785

2GB (2 x 1GB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

25R8064

IBM ServeRAID 8k SAS Controller

4

40K1052

IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD

1

40K1905*

835 Watt Hot-Swap Power Supply Option (US)

1

40K1908

PCI Riser Card PCI-X Option

1

39Y9566

Remote Supervisor Adapter II Slimline Refresh 1

* Model numbers provided are worldwide GAV model numbers, which are not orderable as listed and need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7979 -5AY is 7979-5AU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character with the country-specific designator. For countries using a worldwide power supply, use IBM part number 40K1906 instead of 40K1905.
** This IBM build-to-order model must be configured with two Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four 73-GB hot-swap SAS drives, and all the other components itemized in Table 44.

IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors (Special Order)

This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This server is not supported in Cisco Unified Communications Manager 5.0. The IBM x3650 dual-processor configured server is a robust server solution designed for Cisco Unified Communications Software applications. As many as 7,500 Cisco Unified IP Phones can be supported on a single server running Cisco CallManager 3.3 or later or any version of Cisco Unified Communications Manager. The required processors are dual Intel Xeon 5140 2.33-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7845-I2.
Note that IBM has discontinued sale of this configuration. Tables 45 and 46 are only for reference to help you identify which configuration you have deployed.
Use Table 45 for systems ordered within North America and Table 46 for systems ordered outside of North America.

Table 45. Hardware for IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors

Quantity

IBM Part Number

Description

1

7979-AC1*

IBM System x3650

1

1325

Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

1

1383

Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

4

0542

1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

1670

IBM ServeRAID 8k SAS Controller

4

5159

IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD

1

4144

CD-RW/DVD Combo V Ultrabay Enhanced

1

1968

835 Watt Redundant Hot-Swap Power Supply Option

1

4334

PCI-Express Riser Card

1

1606

Remote Supervisor Adapter II Slimline

* This IBM build-to-order model must be configured with dual Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four 73-GB hot-swap SAS drives, and all the other components itemized in Table 45. Note: Additional parts are required but are not listed in Table 45. These parts will automatically be configured and may also vary by country (power cords and documentation).

Table 46. Hardware for IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors

Quantity

IBM Part Number

Description

1

7979-CTO*

IBM System x3650

1

41Y8981

Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

1

41Y4266

Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)

4

39M5783

1GB (2 x 512MB) PC2-5300 667MHz ECC Chipkill DDR2 FBDIMM

1

25R8077

IBM ServeRAID 8k SAS Controller

4

40K1084

IBM 73GB 2.5" 10K RPM SAS Hot-Swap HDD

1

32R2784

CD-RW/DVD Combo V Ultrabay Enhanced

1

40K0029

835 Watt Redundant Hot-Swap Power Supply Option

1

40K0028

PCI-Express Riser card

1

39R9504

Remote Supervisor Adapter II Slimline

* This IBM build-to-order model must be configured with dual Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four 73-GB hot-swap SAS drives, and all the other components itemized in Table 46. Note: Additional parts are required but are not listed in Table 46. These parts will automatically be configured and may also vary by country (power cords and documentation).

HP Tape Drives

Cisco supports certain models of USB-attached DAT tape drives for software backups to a local tape instead of to a network location. These tapes drives are supported with select models of Cisco MCS 7800 Series Media Convergence Servers. These tape drives were formerly sold as Cisco part numbers DAT-USB-RM-72 and DAT-USB-EXT-72.
Ordering instructions from HP: Please order from HP the part numbers of one of the supported models in Table 47. These part numbers are orderable through HP or HP authorized resellers in all regions. For media for these DAT drives, please consult: http://h18004.www1.hp.com/products/quickspecs/11843_div/11843_div.HTML.

Table 47. Supported HP USB DAT Drives

HP Part Number

Description

Rack-mount tape drive

DW026A 

DAT 72 USB Internal Tape Drive

A8007A

1U USB Rack-Mount Kit

External tape drive (free-standing)

DW027A

DAT 72 USB External Tape Drive

Cisco Application Software Ordering Information

For ordering information of the various Cisco Unified Communications applications, please consult the datasheets and ordering guides for those applications.