Guest

Cisco 7800 Series Media Convergence Servers

Cisco MCS 7845-H1 Unified CallManager Appliance

  • Viewing Options

  • PDF (123.3 KB)
  • Feedback
Data Sheet

THIS PRODUCT IS NO LONGER BEING SOLD AND MIGHT NOT BE SUPPORTED. READ THE END-OF-LIFE NOTICE TO LEARN ABOUT POTENTIAL REPLACEMENT PRODUCTS AND INFORMATION ABOUT PRODUCT SUPPORT.

The Cisco® Unified Communications system of voice and IP Communications products and applications helps organizations communicate more effectively-by helping them streamline business processes, reach the right resource the first time, and increase profitability. The Cisco Unified Communications portfolio is an important part of the Cisco Business Communications Solution-an integrated solution for organizations of all sizes that also includes network infrastructure, security, and network management products; wireless connectivity; and a lifecycle services approach-along with flexible deployment and outsourced management options, end-user and partner financing packages, and third-party communications applications.

PRODUCT OVERVIEW

The Cisco MCS 7845-H1 Unified CallManager Appliance is a high-availability server platform for Cisco Unified CallManager 5.0 and an integral part of a complete, scalable architecture for a new generation of high-quality IP Communications solutions for enterprise data networks. It delivers the high performance and availability that today's enterprise networks demand-and it is easy to deploy and highly cost-effective. The server appliance is preinstalled with an operating system and Cisco Unified CallManager 5.0. It is fully operational upon startup, requiring entry of just a few configuration items such as IP address and domain. At just 2 rack units (2RU) high, the Cisco MCS 7845-H1 offers tremendous power in a low-profile chassis that minimizes rack space. The appliance supports up to 7500 IP phones per appliance and 30,000 IP phones per cluster, and includes the following features and components:

• Two Intel Xeon 3.4-GHz or higher processors, an 800-MHz front side bus (FSB), and 2 MB of Layer 2 cache

• PC2-3200R 4-GB 400-MHz Double Data Rate 2 (DDR2) memory with online spare capabilities

• Integrated Ultra320 Smart Array 6i Redundant Array of Independent Disks (RAID) Controller with 64-MB read cache plus 128-MB battery-backed write cache

• Dual-port Gigabit Ethernet controller (embedded)

• Quick-deployment third-party rail kit

• Support for Integrated Lights Out (iLO) server management

• Support for up to six 1-inch Ultra320 Small Computer System Interface (SCSI) hot-plug hard drives

• Hot-plug redundant power supplies

• Hot-plug redundant fans

KEY FEATURES AND BENEFITS

Performance

The Cisco MCS 7845-H1 is a robust, highly available server platform designed to support today's IP Communications applications. It uses an Integrated Smart Array 6i Controller with a 64-MB cache to provide onboard RAID support without using one of the peripheral-component-interconnect (PCI)-X slots on the server. The appliance occupies only 2RU of space while providing the features most requested in a high-availability server platform. At product introduction, the Cisco MCS 7845-H1 includes two Intel Xeon 3.4-GHz processors, and the processor speed will be increased as Intel retires the 3.4-GHz processor and introduces new processors.

High Availability

High availability on the Cisco MCS 7845-H1 is achieved through the following mechanisms:

• Redundant hot-swap 575W power supplies

• Redundant hot-swap fans

• Hot-swap SCSI hard drives configured using RAID 1

Serviceability

System Health LEDs

The Cisco MCS 7845-H1 provides system health LEDs and unit identification lights on the front and back of the server to ease identification of system problems. When an internal component fails, this indication is made on an internal component LED (amber) and on the front panel of the appliance. If the item can be serviced without removing the server hood, as in the case of a redundant power supply, the external health LED illuminates. If the item can be serviced by removing the hood, as in the case of a fan failure, the internal health LED illuminates. If no failures have occurred, the system health LEDs are green. If a failure has occurred but a redundant feature has enabled the system to continue running, the LED is amber. If the failure is critical and has caused the system to shut down, the LED is red.

Integrated Lights Out

The iLO standard is included on the motherboard. Combining essential management functions and diagnostics with basic lights-out functions as standard components of the server, iLO is available at no charge. It offers maximum security, availability, and control over business-critical servers without the need to visit the systems physically.
The iLO standard also provides fundamental server control and monitoring by integrating essential lights-out technology directly into the Cisco MCS 7845-H1 architecture.
Essential lights-out features include remote power control, text-based console, logs, status, and alert forwarding.
The easy-to-use, dedicated lights-out LAN port is accessible through a browser interface.
The iLO standard provides the following additional features:

• It saves a valuable PCI slot for additional functions and reduces installation and setup time.

• It eliminates the need for an external power adapter or any other internal or external cables.

• It provides a rich suite of security features, including Secure Sockets Layer (SSL).

• It provides a scalable solution by allowing group administration of iLO processors.

Redundant ROM

In the Cisco MCS 7845-H1, the ROM is divided into two logical sections. When the system boots, the primary ROM section is executed and used in server operation. During a ROM flash, the backup section is flashed. When the flash is fully completed, the backup section becomes the primary. If the flash does not complete safely, potentially because of power interruption, the backup is available to boot the system. In the situation in which both images are valid, the user can select which image to use at boot time.

Tape Drive Support

The Cisco MCS 7845-H1 can support an optional 36-/72-GB universal-serial-bus (USB) external Digital Audio Tape (DAT) drive (part number DAT-USB-EXT-72=) or an optional USB rack-mount DAT drive (part number DAT-USB-RM-72=). This tape drive connects through one of the 4 USB 2.0 ports provided by the Cisco MCS 7845-H1 server.

Product Specifications

Table 1 lists product specifications for the Cisco MCS 7845-H1 Unified CallManager Appliance.

Table 1. Product Specifications

Processor at Product Introduction

Processor (CPU)

Xeon DP

Processor internal clock speed

3400 MHz (or higher)

Level 2 cache

2048 KB

Maximum processors

2

Processors installed

2

Basic input/output system (BIOS) type

Flash

Memory

Memory maximum

12 GB

Memory bus clock

400 MHz

Memory technology

PC2-3200R 400-MHz DDR2 synchronous dynamic RAM (SDRAM)

Multibit error mitigation

Advanced error correction code (AECC)

Total RAM slots

6

Memory installed

4 GB (4 x 1-GB dual in-line memory modules [DIMMs])

RAID Controller

Controller model

HP Integrated Smart Array 6i Controller

Interface

PCI-X 133-MHz, 64-bit

Cache

64 MB

Battery-backed write cache

Yes-128 MB

RAID levels supported

0, 1, 1+0, and 5

SCSI protocols supported

Ultra2, Ultra3, and Ultra320

SCSI peak data-transfer rate

320 MB per channel

Maximum quantity hard disk drives

6

SCSI ports (external/internal)

0/2

Hard Disk Capacities

Hot-swappable bays

6

Hard disk interface type

Ultra320 SCSI

Maximum hard drive capacity

880.8 GB with six 146.8-GB internal disks

Hard Disk-72 GB

Hard disk installed

4 72 GB (2 x RAID 1)-all product IDs of server

Hard disk route processor module (RPM)

15,000

Hard disk average seek time

3.8 ms

Network Connectivity

Ethernet network interface card (NIC)

Dual onboard 10/100/1000

Ethernet connectors

Two RJ-45 connectors on rear of server

10BASE-T cable support

EIA Category 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft (100m)

100BASE-TX cable support

EIA Category 5 UTP (2 pair) up to 328 ft (100m)

1000BASE-T cable support

EIA Category 6 UTP (recommended), 5E UTP, or 5 UTP (2 pair) up to 328 ft (100m)

Interfaces

Serial ports

1 RS-232D

Parallel ports

0

Universal-serial-bus (USB) 2.0 ports

3 (1 at front and 2 at rear of chassis)

Keyboard ports

1 PS/2

Mouse ports

1 PS/2

Audio ports

None

System management ports

RJ-45 for HP iLO dedicated Ethernet port

External SCSI Ports

1 Ultra320

Security
• Power-on password
• Keyboard password
• Selectable boot device
• Diskette drive control
• QuickLock, network server mode
• Serial interface control
• Administrator's password
• Disk configuration lock
Industry Standard Compliance
• Advanced Configuration and Power Interface (ACPI) 2.0 compliant
• PCI 2.2 compliant
• Wake On LAN (WOL) support
• Microsoft Logo certifications
• USB 2.0 support
Expansion Options

PCI-X non-hot plug 133-MHz 64-bit slots

1

PCI-X non-hot plug 100-MHz 64-bit slots

2

Power

Maximum input power

735W

Steady-state output power

575W

Autoranging AC mains input

Yes

Power Factor Correction (PFC)

Yes

Maximum hot-swap power supplies

2

Hot-swap power supplies installed

2

Mains input frequency range

47-63 Hz

Operational input voltage ranges

• 90-132 VAC minimum
• 200-264 VAC maximum

Input current range

• 7.5A (at 100 VAC nominal)
• 3.8A (at 240 VAC nominal)
Environmental

Air temperature-server on

50.0 to 95.0°F (10 to 35°C)

Air temperature-server off

−40.0 to 158°F (−40 to 70°C)

Humidity-server on

10 to 90%

Humidity-server off

5 to 95%

BTU rating (maximum configuration)

2508 BTU per hour

Sound emissions idle

7.4 bel

Sound emissions maximum

7.4 bel

Bystander sound pressure idle

58 dBa

Bystander sound pressure operating

58 dBa

Cooling system

8 fans installed

Dimensions

Form factor

Rack-mount 2RU

Rack-mounting

Included for standard third-party rack

Weight-maximum

60 lb (27.22 kg)

Weight-no drives

47.18 lb (20.41 kg)

Height

3.38 in. (8.59 cm)

Width

17.54 in. (44.54 cm)

Depth

26.01 in. (66.07 cm)

ORDERING INFORMATION

To order this product, visit the Cisco Ordering Home Page or visit http://www.cisco.com/en/US/ordering/index.shtml.
You may order the appliance in one of two ways. You can enter CALLMANAGER-5.0 into the Dynamic Configuration tool on Cisco.com and view a list of Cisco MCS Unified CallManager Appliances and their associated licenses. You can also order the components individually using the following product part numbers:

• MCS7845H1-K9-CM50

• LIC-CM5.0-K9-7845-H1=

• KEY-CCM-ADMIN-K9= (order a minimum quantity of 2)

• DAT-USB-EXT-72= (optional external USB DAT tape drive)

• DAT-USB-RM-72= (optional rack-mount USB DAT tape drive)

• DAT-USB-ADPT= (required if DAT-USB-EXT-72= or DAT-USB-RM-72= are used)

• LIC-CCM5.X-2500= (optional-order if you want another 2500 users per appliance)

APPLIANCE SPARES

To order spare appliances, refer to Table 2.

Table 2. Ordering Information for Spare Appliances

Application

Spare Part Number

Cisco Unified CallManager 5.0

MCS7845H1-K9-CM50

FIELD-REPLACEABLE SPARES

To order spare parts for the appliance, refer to Table 3.

Table 3. Ordering Information for Appliance Spare Parts

Spare Part Number

Description

Spare 72-GB Ultra320 hot-plug SCSI drive for Cisco MCS 7845-H1

HDD-7845-H1-72=

Spare 575W power supply for Cisco MCS 7845-H1

PWR-7845-H1=

Spare fan for Cisco MCS 7845-H1

FAN-7845-H1=

Spare external USB 36-/72-GB DAT drive

DAT-USB-EXT-72=

Spare rack-mount USB 36-/73-GB DAT drive

DAT-USB-RM-72=

PCI-to-USB DAT adapter

DAT-USB-ADPT=

(required for DAT-USB-EXT-72= or DAT-USB-RM-72=)

IDENTIFYING CPU SPEED OF APPLIANCE

As the Cisco MCS 7845-H1 Unified CallManager Appliance matures, the processor speeds will be changed as Intel replaces slower processors. Table 4 provides the Cisco manufacturing part number shown on the chassis to help identify the processor speed of any individual appliance.

Table 4. Manufacturing Part Numbers by Processor Speed

Processor

Manufacturing Part Number Located on Server

Introduction

Intel Xeon 3.4 GHz

74-4388-01

Initial production of appliance

Intel Xeon 3.4 GHz

74-4388-02

Revised server with CPU containing 2-MB Layer 2 cache

CISCO UNIFIED COMMUNICATIONS SERVICES AND SUPPORT

Using the Cisco Lifecycle Services approach, Cisco Systems ® and its partners offer a broad portfolio of end-to-end services to support the Cisco Unified Communications system. These services are based on proven methodologies for deploying, operating, and optimizing IP Communications solutions. Initial planning and design services, for example, can help you meet aggressive deployment schedules and minimize network disruption during implementation. Operate services reduce the risk of communications downtime with expert technical support. Optimize services enhance solution performance for operational excellence. Cisco and its partners offer a system-level service and support approach that can help you create and maintain a resilient, converged network that meets your business needs.

WARRANTY INFORMATION

Cisco offers a one-year limited hardware warranty on Cisco Media Convergence Servers. For terms and conditions of this warranty, refer to http://www.cisco.com/univercd/cc/td/doc/es_inpck/1y1cen__.htm.
Text Box:  Printed in the USA	C78-331848-02   03/08