Guest

Cisco 7800 Series Media Convergence Servers

Cisco Media Convergence Server 7825-I1

  • Viewing Options

  • PDF (106.3 KB)
  • Feedback
DATA SHEET

Figure 1. Cisco MCS 7825-I

THIS PRODUCT IS NO LONGER BEING SOLD AND MIGHT NOT BE SUPPORTED. READ THE END-OF-LIFE NOTICE TO LEARN ABOUT POTENTIAL REPLACEMENT PRODUCTS AND INFORMATION ABOUT PRODUCT SUPPORT.

PRODUCT OVERVIEW

The Cisco ® Media Convergence Server 7825-I1 (MCS 7825-I1) is a powerful platform for Cisco IP Communications applications. The Cisco MCS 7825-I1 occupies only 1 rack unit (RU) while providing the features most requested in a server platform at a very economical price point. (Refer to Figure 1.)

• Intel Pentium 4 3.4 GHz processor, an 800 MHz front side bus (FSB), and 1MB of Layer 2 cache

• PC3200 double-data-rate-1 (DDR1) memory with 400 MHz synchronous dynamic RAM (SDRAM)

• Two onboard gigabit network interface cards (NICs)

• Two 80 GB serial advanced technology attachment (SATA) hard-disk drives configured in Redundant Array of Independent Disks (RAID) 1

• Quick-deployment third-party rail kit

• 300W power-factor-correction (PFC) power supply

• 1RU (1.75 in.) form factor, 20 in. depth

SUPPORTED APPLICATIONS

The Cisco MCS 7825-I1 supports the following applications:

• Cisco CallManager-Up to 1000 IP phones per server and 4000 IP phones per cluster

• Cisco Emergency Responder-Up to 12,000 IP phones

• Cisco Intelligent Contact Management (ICM) Enterprise

• Cisco ICM Hosted

• Cisco IP Contact Center (IPCC) Enterprise

• Cisco IPCC Hosted

• Cisco IPCC Express (Integrated Contact Distribution [ICD])

• Cisco IP Interactive Voice Response (IP IVR)

• Cisco Personal Assistant-Up to 2500 users per server

• Cisco Queue Manager

• Cisco Unity Unified Messaging-Up to 24 ports and 1000 mailboxes

PRIMARY FEATURES AND BENEFITS

Performance

The Cisco MCS 7825-I1 is a robust, highly available server platform designed to support today's IP Communications applications. It uses a single Intel Pentium 4 3.4 GHz processor with an 800 MHz FSB.

Memory

The Cisco MCS 7825-I1 supports up to 4 GB of DDR memory. The increased processor performance coupled with DDR memory allows customers to retrieve and process information faster and more efficiently. DDR memory executes twice the number of operations per cycle than traditional SDRAM memory, effectively doubling the data exchange rate between memory and processors.

Variable-Speed Fan Support

The Cisco MCS 7825-I1 includes variable-speed fans to reduce operating noise. Through the use of temperature sensors within the server, the speed of the fans is adjusted to maintain the proper cooling. This reduces the noise generated by the fans by operating them only when required and at a speed based upon the cooling requirements.

SATA and Integrated RAID

The Cisco MCS 7825-I1 server supports enhanced serviceability through integrated RAID level 1 and front-accessible, simple-swap SATA hard-disk drives. If a hard drive fails, user data is preserved on the mirrored drive, and system administrators can easily replace the failing drive without removing the server from the rack. This reduces downtime and provides data reliability in a compact, highly cost-effective server.

System Error LEDs

The Cisco MCS 7825-I1 provides a system error LED and system locator LED on the front of the server to make pinpointing system issues easier than ever. When a system error occurs, this indication is made on the front panel of the Cisco MCS 7825-I1. If no failures have occurred, the system error LED is not lit.

DAT Tape Drive Support

The Cisco MCS 7825-I1 can support an optional 20 or 40 GB external digital-audio-tape (DAT) drive. This tape drive connects through a Small Computer System Interface (SCSI) cable to an external SCSI port. The external DAT drive is orderable (part number MCS-EXT-DAT) and a PCI-based SCSI card is orderable (part number MCS-EXT-SCSI) to provide the external SCSI port. DAT is only supported with Unity applications.

PRODUCT SPECIFICATIONS

Table 1 gives product specifications of the Cisco MCS 7825-I1.

Table 1. Product Specifications of Cisco MCS 7825-I1

Features

Descriptions

Processor at Product Introduction

Processor (CPU)

Prescott Pentium 4

Processor internal clock speed

3.4 GHz (or greater)

Level 2 cache

1 MB

Maximum processors

1

Processors installed

1

Basic input/output system (BIOS) type

Flash memory

Memory

Memory maximum

4 GB

Memory bus clock

400 MHz

Memory technology

PC2700 DDR SDRAM

Bit-error mitigation

Error Checking and Correction (ECC)

Total RAM slots

4

Memory installed

• 1 GB (2 x 512)-ECS1 version
• 2 GB (2 x 1 GB)-CC1 and IPC1 versions
RAID Controller

Controller model

IBM mezzanine ServeRAID-7e controller

Interface

Embedded to planar

Cache

No

Battery-backed write caching

No

RAID levels supported

1

Hard Disk

Hard disk installed

2 x 80 GB

Hard-disk RPM

7200

Hard-disk interface type

SATA, 1.5 Gbps

Network Connectivity

Ethernet NIC

2 onboard 10/100/1000

Connector

2 RJ-45 connectors on back of server

10BASE-T cable support

EIA Categories 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft (100 m)

100BASE-TX cable support

EIA Category 5 UTP (2 pair) up to 328 ft (100 m)

1000BASE-T cable support

EIA Category 6 UTP (recommended), Category 5E UTP, 5 UTP (2 pair) up to 328 ft (100 m)

Expansion Options

PCI-X non-hot plug 66 MHz and 64-bit slots

1 (full height, three-fourths length)

PCI-X non-hot plug 66 MHz and 64-bit slots

1 (half height, half length)

Note: The Cisco 7825-I1 is not qualified for use with Cisco Unity voice cards for traditional PBX integrations.

Interfaces

Serial ports

1 RS-232D

Parallel ports

0

USB 2.0 ports

4 (2 at front and 2 at back of chassis)

Keyboard port

1 PS/2

Mouse port

1 PS/2

Audio ports

None

External SCSI port

None

Security
• Power-on password
• Keyboard password
• Diskette-drive control
• Disk-boot control
• Administrator's password
• Removable DVD-ROM and disk-drive assembly
Power

Maximum input power

300 W

Auto-ranging AC input

Yes

PFC

Yes

Input frequency range

47−63 Hz

Operational input voltage ranges

• 90−139 VAC minimum
• 180−264 VAC maximum

Input current

• 3.0 A (110 VAC)
• 1.5 A (220 VAC)
Environmental

Air temperature-Server on

50 to 95°F (10 to 35°C)

Air temperature-Server off

−104 to 140°F (−40 to 60°C)

Humidity-Server on

8 to 80% (non-condensing)

Humidity-Server off

8 to 80%

BTU rating

853 BTU/hr (per 250W maximum configuration)

Sound emissions, idle

6.5 BELS (operating)

Cooling system

6 fans installed

Dimensions

Form factor

Rack-mount 1RU

Rack-mounting

Included for standard third-party rack

Weight-Maximum

28.0 lb (12.7 kg)

Height

1.75 in. (4.37 cm)

Width

16.69 in. (43.0 cm)

Depth

20.0 in. (50.8 cm)

ORDERING INFORMATION

To place an order, visit the Cisco Ordering Home Page. Table 2 gives the part number for ordering the Cisco Unity Unified Messaging system.

Table 2. Ordering Information for Cisco Applications

Product Name

Part Number

Cisco CallManager 3.3

CALLMANAGER-3.3

Cisco CallManager 4.0

CALLMANAGER-4.0

Cisco CallManager 4.1

CALLMANAGER-4.1

Cisco Emergency Responder

CER-1.2

Cisco ICM Enterprise

ICM-BUNDLE

Cisco ICM Hosted

HOSTED-BUNDLE

Cisco IPCC Enterprise

IPCE-BUNDLE

Cisco IPCC Hosted

HOSTED-BUNDLE

Cisco IPCC Express

PCX-3.Y-STANDARD. PCX-3.Y-ENHANCED, PCX-3.Y-PREMIUM

Cisco IP IVR

IPIVR-3.5=

Cisco Personal Assistant

PASR-BUNDLE

Cisco Queue Manager

IPQM-3.5=

Cisco Unity Unified Messaging System

UNITY-BUNDLE

SERVER SPARES

Table 3 gives information about ordering spare servers.

Table 3. Ordering Information for Spare Servers by Application

Application

Spare Part Number

Cisco CallManager

MCS-7825-I1-IPC1

Cisco Emergency Responder

MCS-7825-I1-IPC1

Cisco ICM Enterprise

MCS-7825-I1-CC1

Cisco ICM Hosted

MCS-7825-I1-CC1

Cisco IPCC Enterprise

MCS-7825-I1-CC1

Cisco IPCC Hosted

MCS-7825-I1-CC1

Cisco IPCC Express

MCS-7825-I1-CC1

Cisco IP IVR

MCS-7825-I1-CC1

Cisco MeetingPlace

MCS-7825-I1-IPC1

Cisco Queue Manager

MCS-7825-I1-CC1

Cisco Unity Unified Messaging System

MCS-7825-I1-ECS1

FIELD-REPLACEABLE SPARES

Table 4 gives ordering information for server spare parts.

Table 4. Ordering Information for Server Spare Parts

Spare-Part Number

Description

MEM-7825-I1-512=

Spare 512 MB SDRAM dual in-line memory module (DIMM) for Cisco MCS 7825-I1 server

MEM-7825-I1-1GB=

Spare Pair 1 GB SDRAM dual in-line memory module (DIMM) for Cisco MCS 7825-I1 server

HDD-7825-I1-80=

Spare 80 GB SATA hard-disk drive, cold-pluggable

IDENTIFYING SERVER CPU SPEED

As the Cisco MCS 7825-I1 matures, the processor speeds will be changed as Intel retires slower processors and replaces them with faster processors. Table 5 provides the Cisco manufacturing part number that is shown on the chassis to help identify any processor speed of any individual server.

Table 5. Manufacturing Part Numbers by Processor Speed

Processor

Manufacturing Part Number Located on Server

Introduction

Intel Pentium 4 3.4 GHz Processor

74-3528-01

Initial production of server:

• MCS-7825-I1-ECS1
Intel Pentium 4 3.4 GHz Processor

74-3909-01

Initial production of server:

• MCS-7825-I1-IPC1
• MCS-7825-I1-CC1

SERVICE AND SUPPORT

Cisco Systems ® offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services.

WARRANTY INFORMATION

Cisco offers a one-year limited hardware warranty on Cisco media convergence servers. For terms and conditions of this warranty, refer to http://www.cisco.com/univercd/cc/td/doc/es_inpck/1y1cen__.htm.
Text Box:  Printed in the USA	C78-367119-01   03/08