PDF(75.1 KB) View with Adobe Reader on a variety of devices
Updated:December 15, 2008
Document ID:1518436781534697
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL6613
Cisco® announces the end-of-sale and end-of life dates for the Selected Cisco Catalyst 6500 Series Line Cards. The last day to order the affected product(s) is December 15, 2009. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Selected Catalyst 6500 Series Line Cards
Table 1. End-of-Life Milestones and Dates for the Selected Cisco Catalyst 6500 Series Line Cards
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
December 15, 2008
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
December 15, 2009
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
March 16, 2010
End of SW Maintenance Releases Date: HW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
December 15, 2010
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
December 15, 2010
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
December 15, 2010
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
March 15, 2014
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
December 14, 2014
Selected Catalyst 6500 Series Line Cards
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
WS-X6148-45AF
Catalyst 6500 PoE 802.3af 10/100, 48 port(RJ45) line card
Customers are encouraged to migrate to the Cisco X6148A line cards suggested in Table 2. Information about these products can be found at:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd8017376e.html. The primary benefit of the Cisco WS-X6148A line card is the larger per-port buffers than the WS-X6148 line card offers. A minimum requirement for the Cisco WS-X6148A line cards is Cisco IOS Software Release 12.2(18)SXF,Cisco Catalyst OS 8.4(1),or Cisco Hybrid Mode OS 12.2(17d)SXB7.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to:
http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the Selected Cisco Catalyst 6500 Series Line Cards through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.
Feedback