Guest

Cisco 2800 Series Integrated Services Routers

End-of-Sale and End-of-Life Announcement for the Cisco 2800 Series Integrated Services Router Memory

  • Viewing Options

  • PDF (111.0 KB)
  • Feedback

EOL9494

Cisco announces the end-of-sale and end-of-life dates for the Cisco 2800 Series Integrated Services Router Memory. The last day to order the affected product(s) is May 21, 2014. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.

Table 1. End-of-Life Milestones and Dates for the Cisco 2800 Series Integrated Services Router Memory

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.

November 20, 2013

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

May 21, 2014

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

August 19, 2014

End of SW Maintenance Releases Date:
HW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

May 21, 2015

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

May 21, 2015

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

May 21, 2015

End of Service Contract Renewal Date: HW

The last date to extend or renew a service contract for the product.

August 16, 2018

Last Date of Support:
HW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

May 31, 2019

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

MEM2800-128CF=

128MB CF for the Cisco 2800 Series

MEM2800-64CF=

64MB CF for the Cisco 2800 Series

MEM2801-128U384D

128 to 384MB SODIMM DRAM factory upgrade for the Cisco 2801

MEM2801-128U384D=

128 to 384MB SODIMM DRAM factory upgrade for the Cisco 2801

MEM2801-192U256D

192 to 256MB SODIMM DRAM factory upgrade for the Cisco 2801

MEM2821-256U512D

256 to 512MB DDR DRAM factory upgrade for the Cisco 2821

MEM2821-512U768D

512 to 768MB DDR DRAM factory upgrade for the Cisco 2821

MEMUSB-256FT

256MB USB Flash Token for Cisco 1800/2800/3800 series

MEMUSB-256FT=

256MB USB Flash Token for Cisco 1800/2800/3800 series

Product Migration Options

There is no replacement available for the Cisco 2800 Series Integrated Services Router Memory at this time.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase Cisco 2800 Series Integrated Services Router Memory through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.

For More Information

For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to:
http://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cisco/support/notifications.html.

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.