EOL/EOS for the Cisco MDS 9000 2-Gbps Fibre Channel SFP Optics

Available Languages

Download Options

PDF (68.0 KB)
View with Adobe Reader on a variety of devices

Updated:January 9, 2014

Document ID:1518507999540370

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

EOL6895

Cisco announces the end-of-sale and end-of life dates for the Cisco MDS 9000 2-Gbps Fibre Channel SFP Optics. The last day to order the affected product(s) is May 1, 2010. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco MDS 9000 2-Gbps Fibre Channel SFP Optics


Milestone	Definition	Date
End-of-Life Announcement Date	The date the document that announces the end of sale and end of life of a product is distributed to the general public.	October 31, 2009
End-of-Sale Date	The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.	May 1, 2010
Last Ship Date: HW	The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.	July 30, 2010
End of Routine Failure Analysis Date: HW	The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.	May 1, 2011
End of New Service Attachment Date: HW	For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.	May 1, 2011
End of Service Contract Renewal Date: HW	The last date to extend or renew a service contract for the product.	July 27, 2014
Last Date of Support: HW	The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.	April 30, 2015

HW = Hardware, OS SW = Operating System Software, App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement


End-of-Sale Product Part Number	Product Description	Replacement Product Part Number	Replacement Product Description	Additional Information
DS-SFP-FC-2G-LW	2Gbps Fibre Channel-LW SFP, LC, RESTRICTED PRODUCT	See the Product Migration Options section below for detailed information on replacing this product.
DS-SFP-FC-2G-LW=	2Gbps Fibre Channel-LW SFP, LC, Spare, RESTRICTED PRODUCT	See the Product Migration Options section below for detailed information on replacing this product.
DS-SFP-FC-2G-SW	2Gbps Fibre Channel-SW SFP, LC, RESTRICTED PRODUCT	See the Product Migration Options section below for detailed information on replacing this product.
DS-SFP-FC-2G-SW=	2Gbps Fibre Channel-SW SFP, LC, Spare, RESTRICTED PRODUCT	See the Product Migration Options section below for detailed information on replacing this product.

Product Migration Options

Customers are encouraged to migrate from the Cisco MDS 9000 2-Gbps Fibre Channel modules with 2-Gbps Small Form-Factor Pluggable (SFP) optics to Cisco MDS 9000 4-Gbps and 8-Gbps Fibre Channel modules. Cisco MDS 9000 4-Gbps modules support 4-Gbps SFP optics. Cisco MDS 9000 8-Gbps Fibre Channel modules support both 4-Gbps SFP and 8-Gbps Enhanced SFP optics. For more information about this product,go to: http://www.cisco.com/en/US/prod/collateral/ps4159/ps6409/ps4358/product_data_sheet09186a00801bc698.html

Customers may purchase the Cisco MDS 9000 4-Gbps and 8-Gbps Fibre Channel Switching Modules and 4-Gbps SFP and 8-Gbps SFP+ optics from EMC Corporation, IBM Corporation, Hitachi Data Systems, Hewlett-Packard, Xiotech, Sun, Network Appliance, Dell, NEC, or Fujitsu, all of whom are designated original storage manufacturer (OSM) or solution technology integrator (STI) partners, or from any of these companies' resellers. Cisco does not offer trade-in credits or a trade-in program for Cisco MDS 9000 family products.

For More Information

For more information about the Cisco MDS 9000 4-Gbps Fibre Channel SFP and 8-Gbps Fibre Channel SFP+ optics, visit http://www.cisco.com/en/US/prod/collateral/ps4159/ps6409/ps4358/product_data_sheet09186a00801bc698.html, or contact your local account representative.

For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html

To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml

Contact Cisco

Was this Document Helpful?

Feedback