End-of-Sale and End-of-Life Announcement for the Cisco MDS 9000 SAN-OS Software Release 3.x

Available Languages

Download Options

PDF (75.4 KB)
View with Adobe Reader on a variety of devices

Updated:January 6, 2010

Document ID:1518515542220464

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

EOL6898

Cisco announces the end-of-sale and end-of life dates for the Cisco MDS 9000 SAN-OS Software Release 3.x. The last day to order the affected product(s) is July 5, 2010. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco MDS 9000 SAN-OS Software Release 3.x


Milestone	Definition	Date
End-of-Life Announcement Date	The date the document that announces the end of sale and end of life of a product is distributed to the general public.	January 4, 2010
End-of-Sale Date	The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.	July 5, 2010
Last Ship Date: OS SW	The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.	October 3, 2010
End of SW Maintenance Releases Date: OS SW	The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.	July 5, 2011
End of New Service Attachment Date: OS SW	For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.	July 5, 2011
End of Service Contract Renewal Date: OS SW	The last date to extend or renew a service contract for the product.	September 30, 2014
Last Date of Support:	The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.	July 4, 2015

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement


End-of-Sale Product Part Number	Product Description	Replacement Product Part Number	Replacement Product Description	Additional Information
M91S1K9-3.2.2	MDS 9100 Supervisor/Fabric-I, SAN-OS Software Release 3.2.2	See the Product Migration Options section below for detailed information on replacing this product.
M91S1K9-3.2.3	MDS 9100 Supervisor/Fabric-I, SAN-OS Software Release 3.2.3	See the Product Migration Options section below for detailed information on replacing this product.
M91S1K9-3.3.1A	MDS 9100 Supervisor/Fabric-I, SAN-OS Software Release 3.3.1A	See the Product Migration Options section below for detailed information on replacing this product.
M91S1K9-3.3.1C	MDS 9100 Supervisor/Fabric-I, SAN-OS Software Release 3.3.1C	See the Product Migration Options section below for detailed information on replacing this product.
M91S1K9-3.3.2	MDS 9100 Supervisor/Fabric-I, SAN-OS Software Release 3.3.2	See the Product Migration Options section below for detailed information on replacing this product.
M91S2K9-3.2.2	MDS 9100 Supervisor/Fabric-2, SAN-OS Software Release 3.2.2	See the Product Migration Options section below for detailed information on replacing this product.
M91S2K9-3.2.3	MDS 9100 Supervisor/Fabric-2, SAN-OS Software Release 3.2.3	See the Product Migration Options section below for detailed information on replacing this product.
M91S2K9-3.3.1A	MDS 9100 Supervisor/Fabric-2, SAN-OS Software Release 3.3.1A	See the Product Migration Options section below for detailed information on replacing this product.
M91S2K9-3.3.1C	MDS 9100 Supervisor/Fabric-2, SAN-OS Software Release 3.3.1C	See the Product Migration Options section below for detailed information on replacing this product.
M91S2K9-3.3.2	MDS 9100 Supervisor/Fabric-2, SAN-OS Software Release 3.3.2	See the Product Migration Options section below for detailed information on replacing this product.
M92S1K9-3.2.2	MDS 9200 Supervisor/Fabric-I, SAN-OS Software Release 3.2.2	See the Product Migration Options section below for detailed information on replacing this product.
M92S1K9-3.2.3	MDS 9200 Supervisor/Fabric-I, SAN-OS Software Release 3.2.3	See the Product Migration Options section below for detailed information on replacing this product.
M92S1K9-3.3.1A	MDS 9200 Supervisor/Fabric-I, SAN-OS Software Release 3.3.1A	See the Product Migration Options section below for detailed information on replacing this product.
M92S1K9-3.3.1C	MDS 9200 Supervisor/Fabric-I, SAN-OS Software Release 3.3.1C	See the Product Migration Options section below for detailed information on replacing this product.
M92S1K9-3.3.2	MDS 9200 Supervisor/Fabric-I, SAN-OS Software Release 3.3.2	See the Product Migration Options section below for detailed information on replacing this product.
M92S2K9-3.2.2	MDS 9200 Supervisor/Fabric-2, SAN-OS Software Release 3.2.2	See the Product Migration Options section below for detailed information on replacing this product.
M92S2K9-3.2.3	MDS 9200 Supervisor/Fabric-2, SAN-OS Software Release 3.2.3	See the Product Migration Options section below for detailed information on replacing this product.
M92S2K9-3.3.1A	MDS 9200 Supervisor/Fabric-2, SAN-OS Software Release 3.3.1A	See the Product Migration Options section below for detailed information on replacing this product.
M92S2K9-3.3.1C	MDS 9200 Supervisor/Fabric-2, SAN-OS Software Release 3.3.1C	See the Product Migration Options section below for detailed information on replacing this product.
M92S2K9-3.3.2	MDS 9200 Supervisor/Fabric-2, SAN-OS Software Release 3.3.2	See the Product Migration Options section below for detailed information on replacing this product.
M95S1K9-3.2.2	MDS 9500 Supervisor/Fabric-I, SAN-OS Software Release 3.2.2	See the Product Migration Options section below for detailed information on replacing this product.
M95S1K9-3.2.3	MDS 9500 Supervisor/Fabric-I, SAN-OS Software Release 3.2.3	See the Product Migration Options section below for detailed information on replacing this product.
M95S1K9-3.3.1A	MDS 9500 Supervisor/Fabric-I, SAN-OS Software Release 3.3.1A	See the Product Migration Options section below for detailed information on replacing this product.
M95S1K9-3.3.1C	MDS 9500 Supervisor/Fabric-I, SAN-OS Software Release 3.3.1C	See the Product Migration Options section below for detailed information on replacing this product.
M95S1K9-3.3.2	MDS 9500 Supervisor/Fabric-I, SAN-OS Software Release 3.3.2	See the Product Migration Options section below for detailed information on replacing this product.
M95S2K9-3.2.2	MDS 9500 Supervisor/Fabric-2, SAN-OS Software Release 3.2.2	See the Product Migration Options section below for detailed information on replacing this product.
M95S2K9-3.2.3	MDS 9500 Supervisor/Fabric-2, SAN-OS Software Release 3.2.3	See the Product Migration Options section below for detailed information on replacing this product.
M95S2K9-3.3.1A	MDS 9500 Supervisor/Fabric-2, SAN-OS Software Release 3.3.1A	See the Product Migration Options section below for detailed information on replacing this product.
M95S2K9-3.3.1C	MDS 9500 Supervisor/Fabric-2, SAN-OS Software Release 3.3.1C	See the Product Migration Options section below for detailed information on replacing this product.
M95S2K9-3.3.2	MDS 9500 Supervisor/Fabric-2, SAN-OS Software Release 3.3.2	See the Product Migration Options section below for detailed information on replacing this product.
SSI-M9K9-322	3.2(2) SSI Image	See the Product Migration Options section below for detailed information on replacing this product.
SSI-M9K9-323	3.2(3) SSI Image	See the Product Migration Options section below for detailed information on replacing this product.
SSI-M9K9-331A	3.3(1A) SSI Image	See the Product Migration Options section below for detailed information on replacing this product.
SSI-M9K9-331C	3.3(1C) MDS SSI Image	See the Product Migration Options section below for detailed information on replacing this product.
SSI-M9K9-332	MDS SSI 3.3(2) Image	See the Product Migration Options section below for detailed information on replacing this product.

Product Migration Options

Customers are encouraged to migrate to the Cisco MDS 9000 NX-OS Software Release 4.1x. Information about this product can be found at: http://www.cisco.com/en/US/products/ps9898/index.html .

Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html

Customers may be able to continue to purchase the Cisco MDS 9000 SAN-OS Software Release 3.x through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos

Service prices for Cisco products are subject to change after the product End of Sale date.

The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html

For More Information

For more information about the Cisco MDS 9000 NX-OS Software Release 4.1x, visit http://www.cisco.com/en/US/products/ps9898/index.html., or contact your local account representative.

For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/prod_end_of_life.html

To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cisco/support/notifications.html

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml

Contact Cisco

Was this Document Helpful?

Feedback