Guest

Cisco SCE 2000 Series Service Control Engine

EoS/EoL for the Cisco SCE 2020 SCE FE Chassis with 4 Copper FE Interfaces

  • Viewing Options

  • PDF (107.3 KB)
  • Feedback

EOL5845 - Amended

Cisco® announces the end-of-sale and end-of life dates for the Cisco SCE 2020 Service Control Engine FE Chassis with 4 Copper FE Interfaces. The last day to order the affected product(s) is October 30, 2007. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco SCE 2020 Service Control Engine FE Chassis with 4 Copper FE Interfaces

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

July 31, 2007

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

October 30, 2007

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

January 28, 2008

End of SW Maintenance Releases Date: App. SW

The last date that Cisco Engineering may release any final software maintenance releases, protocol pack updates or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

October 29, 2008

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

October 29, 2008

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

October 29, 2008

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

January 26, 2012

Last Date of Support:
HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

October 28, 2012


HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

SCE2020-4/8XFE

Cisco SCE 2020 Service Control Engine, 4-port FE

SCE2020-4XGBE-MM

Cisco SCE 2020 Service Control Engine, Multi Mode, 4-port GE

SCE2020-4/8XFE

Cisco SCE 2020 Service Control Engine, 4-port FE

SCE2020-4XGBE-SM

Cisco SCE2020 Service Control Engine, Single Mode, 4-port GE

SCE2020-4/8XFE-Z

Cisco SCE2020, 4/8xFE, Zero Priced

SCE2020-4XGBE-MM

Cisco SCE 2020 Service Control Engine, Multi Mode, 4-port GE

SCE2020-4/8XFE-Z

Cisco SCE2020, 4/8xFE, Zero Priced

SCE2020-4XGBE-SM

Cisco SCE2020 Service Control Engine, Single Mode, 4-port GE

SCE2020-4/8XFE=

Cisco SCE 2020 4/8xFE Chassis - Spare

SCE2020-4XGBE-MM

Cisco SCE 2020 Service Control Engine, Multi Mode, 4-port GE

SCE2020-4/8XFE=

Cisco SCE 2020 4/8xFE Chassis - Spare

SCE2020-4XGBE-SM

Cisco SCE2020 Service Control Engine, Single Mode, 4-port GE

Product Migration Options

Customers are encouraged to migrate to the Cisco SCE 2020 Service Control Engine Single-mode or Multimode Chassis with GBE interfaces. Information about these products can be found at: http://www.cisco.com/en/US/products/ps6151/index.html
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the Cisco SCE 2020 Service Control Engine FE Chassis with 4 Copper FE Interfaces through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos

For More Information

For more information about the Cisco SCE 2020 Service Control Engine Single-mode or Multimode Chassis, visit http://www.cisco.com/en/US/products/ps6151/index.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/prod_end_of_life.html
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice