Guest

Cisco UCS B-Series Blade Servers

Cisco UCS B-Series M2 Blade Servers Data Sheet

  • Viewing Options

  • PDF (509.3 KB)
  • Feedback

Cisco Unified Computing System Overview

The Cisco® Unified Computing System is a next-generation data center platform that unites compute, network, storage access, and virtualization into a cohesive system designed to reduce total cost of ownership (TCO) and increase business agility. The system integrates a low-latency, lossless 10 Gigabit Ethernet unified network fabric with enterprise-class, x86-architecture servers. The system is an integrated, scalable, multichassis platform in which all resources participate in a unified management domain (Figure 1).

Figure 1. The Cisco Unified Computing System Is a Highly Available Cohesive Architecture

Building on the success of the Cisco UCS B200 M1 and UCS B250 M1 servers, the Cisco UCS B200 M2 and UCS B250 M2 servers extend the capabilities of the Cisco Unified Computing System with the next generation of Intel processor technology: Intel® Xeon® 5600 series processors. These powerful processors deliver more cores, threads, and cache, all within a similar power envelope, with even faster payback, greater productivity, and better energy efficiency. When put into production, Cisco Unified Computing System and Intel Xeon 5600 series processors together offer further reductions in TCO, increased business agility, and another big leap forward in data center virtualization.

Product Overview

The Cisco UCS B-Series Blade Servers are crucial building blocks of the Cisco Unified Computing System, delivering scalable and flexible computing for today’s and tomorrow’s data center while helping reduce TCO.

The Cisco UCS B-Series Blade Servers are based on industry-standard server technologies and provide:

Up to two Intel Xeon Series 5600 multicore processors

Two optional front-accessible, hot-swappable SAS hard drives

Support for up to two dual-port mezzanine card connections for up to 40 Gbps of redundant I/O throughput

Industry-standard double-data-rate 3 (DDR3) memory

Remote management through an integrated service processor that also executes policy established in Cisco UCS Manager software

Local keyboard, video, and mouse (KVM) access through a front console port on each server

Out-of-band access by remote KVM, Secure Shell (SSH) Protocol, and virtual media (vMedia) as well as Intelligent Platform Management Interface (IPMI)

The Cisco UCS B-Series offers two blade server models: the Cisco UCS B200 M2 2-Socket Blade Server and the Cisco UCS B250 M2 2-Socket Extended Memory Blade Server (Figure 2). The Cisco UCS B200 M2 is a half-width blade with 12 DIMM slots for up to 192 GB of memory; it supports one mezzanine adapter. The Cisco UCS B250 M2 is a full-width blade with 48 DIMM slots for up to 384 GB of memory; it supports up to two mezzanine adapters.

Figure 2. Cisco UCS B200 M2 and UCS B250 M2 Blade Servers

Table 1 compares the features of the Cisco UCS B-Series Blade Servers.

Table 1. Comparison of Cisco UCS B200 M2 and UCS B250 M2 Features

Model

Maximum Memory Capacity

Memory Size and Speed

Size and Form Factor

Maximum Number of Servers per Chassis

Maximum Number of Servers per System

Mezzanine Adapters

Throughput

Cisco UCS B200 M2

12 DIMMs; up to 192 GB

4-, 8-, and 16-GB DDR3; 1333 MHz

Half-width

8

160

1

Up to 20 Gbps of redundant I/O throughput

Cisco UCS B250 M2

48 DIMMs; up to 384 GB

4- and 8-GB DDR3; 1066 MHz and 1333 MHz

Full width

4

80

2

Up to 40 Gbps of redundant I/O throughput

Features and Benefits

The Cisco UCS B-Series Blade Servers are designed to increase performance, energy efficiency, and flexibility for demanding virtualized and nonvirtualized applications. Based on Intel Xeon 5600 Series processors, Cisco UCS BSeries Blade Servers adapt processor performance to application demands and intelligently scale energy use based on utilization.

Each Cisco UCS B-Series Blade Server uses converged network adapters (CNAs) for access to the unified fabric. This design reduces the number of adapters, cables, and access-layer switches while still allowing traditional LAN and SAN connectivity. This Cisco innovation reduces capital expenditures and operating expenses, including administrative overhead and power and cooling costs.

Cisco’s innovative service profile technology embedded in the Cisco UCS Manager, provisions Cisco UCS B-Series Blade Servers and their I/O properties (for more information, please see Cisco UCS Manager At-a-Glance). Infrastructure policies needed to provision servers and deploy applications, such as policies for power and cooling, security, identity, hardware health, and Ethernet and storage networking, are encapsulated in the service profiles. Use of service profiles helps reduce the number of manual steps needed for provisioning, the opportunities for human error, and server and network deployment times. In addition, service profiles improve policy consistency and coherency across the entire Cisco Unified Computing System.

The Cisco UCS B250 M2 increases performance and capacity for demanding virtualization and large-data-set workloads with up to 384 GB of industry-standard memory. This technology offers a cost-effective memory footprint for demanding workloads.

The Cisco UCS B200 M2 balances simplicity, performance, and density for production-level virtualization and other mainstream data center workloads.

Table 2 summarizes the features and benefits of the Cisco UCS B-Series.

Table 2. Features and Benefits

Feature

Benefit

Unified fabric

Decreases TCO by reducing the number of network interface cards (NICs), host bus adapters (HBAs), switches, and cables needed

Service profile support

Contains all the infrastructure policies required to deploy applications and provision servers
Helps reduce the number of manual steps required and the opportunity for human error, improving server policy consistency and coherency.
Allows servers and support infrastructure to be provisioned in minutes instead of days, shifting IT’s focus from maintenance to strategic initiatives

Autodiscovery

Requires no configuration; like all components in the Cisco Unified Computing System, blades are automatically recognized and configured by Cisco UCS Manager

Cisco Extended Memory Technology

With Cisco UCS B250 M2, provides up to 384 GB of DDR3 memory
Substantially increases the memory footprint, increasing performance and capacity for demanding virtualization and large-data-set workloads
Helps reduce the number of servers and decrease licensing costs with higher virtual to physical consolidation ratios
Offers a more cost-effective memory footprint as smaller-density DIMMs can be substituted for more expensive, higher-density DIMMs

Two server blade types

Provides memory and I/O bandwidth flexibility to meet application requirements

Mezzanine adapters

Provides flexibility, increased performance, compatibility with industry standards, and network policy coherence for virtualized environments

Hot-swappable SAS drives

Each blade supports up to two front-access hot-swappable drives for local storage, providing redundancy options and ease of serviceability
Supports 10,000-RPM drives for value and capacity. and 15,000-RPM drives for performance

Embedded RAID 0 and 1 support

Provides data protection at no additional cost

Intel Xeon Series 5600 multicore processors

Adapts processor performance to application demands, and intelligently scales energy use based on utilization
Cisco UCS B200 M2 provides up to 192 GB of DDR3 memory

Intel Intelligent Power Technology

Reduces energy costs by automatically putting processor and memory in the lowest available power state while still delivering the performance required

Intel Next-Generation Virtualization Technology

Enables best-in-class virtualization performance, superb scalability, enhanced flexibility, and simplified server management

Extensive monitoring

For each blade, provides extensive environmental monitoring
Allows use of user thresholds to optimize environmental management of the blade

Specifications

The Cisco UCS B-Series Blade Servers are designed for use in the Cisco Unified Computing System environment and require Cisco UCS Manager, UCS 6100 Series Fabric Interconnects, UCS 5100 Series Blade Server Chassis, and UCS 2100 Series Fabric Extenders to function in this integrated environment.

Table 3 summarizes the specifications for the Cisco UCS B-Series. Table 4 summarizes regulatory standards compliance.

Table 3. Product Specifications

Item

Specification

Processors

1 or 2 Intel Xeon Series 5600 processors
Choice of Cisco UCS B250 M2 processors: Intel Xeon X5690, X5680, X5675, X5670, X5650, E5649, E5640, or E5620
Choice of Cisco UCS B200 M2 processors: Intel Xeon X5690, X5680, X5675, X5670, X5650, E5649, E5640, or E5620

Memory

Up to 12 DIMM slots per Cisco UCS B200 M2
Up to 48 DIMM slots per Cisco UCS B250 M2
Support for DDR3 registered DIMMs
Support for DDR3 low voltage DIMMs

Mezzanine adapters slots

1 per Cisco UCS B200 M2
1 or 2 per Cisco UCS B250 M2

Mezzanine adapter types

Cisco UCS 82598KR-10 Gigabit Ethernet Network Adapter:
Cisco UCS M71KR-Q QLogic Converged Network Adapter
Cisco UCS M71KR-E Emulex Converged Network Adapter
Cisco UCS M81KR Virtual Interface Card

Hard drives

Up to 2 front-accessible, hot-swappable, 2.5-inch SAS or SATA Solid State Disk (SSD) drives per blade

Hard drive options

73-GB SAS; 15,000 rpm
146-GB SAS; 10,000 rpm and 15,000 rpm
300-GB SAS; 10,000 rpm
100-GB 15mm SATA SSD

Management

Managed from the Cisco UCS 6100 Series Fabric Interconnects by Cisco UCS Manager

Temperature: Operating

50 to 95°F (10 to 35°C)

Temperature: Nonoperating

-40 to 149°F (-40 to 65°C)

Humidity: Operating

5 to 93% noncondensing

Humidity: Nonoperating

5 to 93% noncondensing

Altitude: Operating

0 to 10,000 ft (0 to 3,000 m) Maximum ambient temperature decreases by 1°C per 300m)

Altitude: Nonoperating

40.000 ft (12,000m)

Table 4. Regulatory Standards Compliance: Safety and EMC

Specification

Description

Regulatory compliance

Products should comply with CE Markings according to directives 2004/108/EC and 2006/108/EC

Safety

UL 60950-1
CAN/CSA-C22.2 No. 60950-1
EN 60950-1
IEC 60950-1
AS/NZS 60950-1
GB4943

EMC: Emissions

47CFR Part 15 (CFR 47) Class A
AS/NZS CISPR22 Class A
CISPR2 2 Class A
EN55022 Class A
ICES003 Class A
VCCI Class A
EN61000-3-2
EN61000-3-3
KN22 Class A
CNS13438 Class A

EMC: Immunity

EN50082-1
EN61000-6-1
EN55024
CISPR24
EN300386
KN 61000-4 Series

Ordering Information

This section helps customers understand all the components they need to purchase to install and use the product. This section also provides a direct link to the Cisco Ordering Tool and lists part numbers for customer convenience (Table 5).

To place an order, visit the Cisco Ordering homepage. To download software, visit the Cisco Software Center.

Table 5. Ordering Information

Product Name

Part Number

Cisco UCS B200 M2 Blade Server

N20-B6625-1

Cisco UCS B250 M2 Blade Server

N20-B6625-2

Warranty Information

Find warranty information at Cisco.com on the Product Warranties page.

Cisco Unified Computing Services

Using a unified view of data center resources, Cisco and our industry-leading partners deliver services that accelerate your transition to a unified computing environment. Cisco Unified Computing Services help you quickly deploy your data center resources and optimize ongoing operations to better meet your business needs. For more information about these and other Cisco Data Center Services, visit http://www.cisco.com/go/dcservices.

Why Cisco?

Cisco has significant experience in listening to customer requirements and providing solid technology innovation for the enterprise data center. Cisco delivers standards-based solutions backed by a broad partner ecosystem of industry leaders to provide end-to-end customer solutions. Unified computing elevates the traditional product classification of network, server, storage, operating systems, and applications to a data center-wide vision. Cisco, as one of the largest technology providers in the world, has the resources, expertise, and customer focus to deliver on the unified computing vision.

For More Information

For more information about Cisco UCS B-Series Blade Servers, visit http://www.cisco.com/en/US/products/ps10280/index.html or contact your local Cisco representative.