Guest

Cisco Secure Access Control Server Solution Engine

EOS/EOL for the Cisco Secure Access Control Server Solution Engine 1113 Hardware

  • Viewing Options

  • PDF (103.4 KB)
  • Feedback

EOL6834

Cisco announces the end-of-sale and end-of life dates for the Cisco Secure Access Control Server Solution Engine 1113 Hardware. The last day to order the affected product(s) is February 5, 2010. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
The Cisco Secure Access Control Server (ACS) Solution Engine is composed of the Solution Engine hardware and the ACS software. This is an end-of-sale announcement for the 1113 Solution Engine hardware. The ACS software has separate end-of-sale and end-of-life timetables. For more information, go to: http://cisco.com/en/US/products/sw/secursw/ps2086/prod_eol_notices_list.html

Table 1. End-of-Life Milestones and Dates for the Cisco Secure Access Control Server Solution Engine 1113 Hardware

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

August 7, 2009

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

February 5, 2010

Last Ship Date: HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

May 6, 2010

End of Routine Failure Analysis Date: HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

February 5, 2011

End of New Service Attachment Date: HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

February 5, 2011

End of Service Contract Renewal Date: HW

The last date to extend or renew a service contract for the product.

May 3, 2014

Last Date of Support: HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

February 4, 2015

HW = Hardware, OS SW = Operating System Software, App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

CSACSE-1113-K9

Cisco Secure ACS 4.X Solution Engine 1113 Appliance

CSACS-1120-K9

Cisco 1120 Secure ACS Appliance with 5.0 Software

-

CSACSE-1113-UP-K9

Upgrade any ACS version to ACS SE 4.X 1113 Appliance

CSACS-1120-UP-K9

ACS 1120 Appliance And 5.0 SW Upgrade From 1113 Appliance

-

Product Migration Options

Customers are encouraged to migrate to the Cisco Secure 1120 Access Control System. The Cisco 1120 hardware is a replacement for the Cisco 1113 hardware. In addition to the Cisco Secure ACS 5.0 pre-installed software, the Cisco 1120 includes ACS 4.2 software which can be used for customers who still require this release. Information about this product can be found at: http://cisco.com/en/US/products/ps9911/index.html
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html
Customers may be able to continue to purchase the Cisco Secure Access Control Server Solution Engine 1113 Hardware through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html

For More Information

For more information about the Cisco Secure 1120 Access Control System, visit http://www.cisco.com/en/US/products/ps9911/index.html, or contact your local account representative .
To request information about the Cisco Secure 1120 Access Control System, send an e-mail to acs-mkt@cisco.com .
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html
Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices
To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml