Guest

Cisco IPS 4200 Series Sensors

End-of-Sale and End-of-Life Announcement for the Cisco IPS 4200 Series Accessories

  • Viewing Options

  • PDF (133.0 KB)
  • Feedback
EOL9251-Amended

Cisco announces the end-of-sale and end-of life dates for the Cisco IPS 4200 Series Accessories. The last day to order the affected product(s) is November 23, 2013. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.

Table 1. End-of-Life Milestones and Dates for the Cisco IPS 4200 Series Accessories

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

May 25, 2013

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

November 23, 2013

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

February 21, 2014

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

November 23, 2014

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

November 23, 2014

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

February 18, 2018

Last Date of Support:
HW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

November 30, 2018

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

IPS-2SX-INT

2-port fiber interface for the 4260 and 4270

IPS-2SX-INT=

2-port fiber interface for the 4260 and 4270

IPS-2X10GE-SR-INT

IPS 2-Port 10Gigabit Ethernet Interface Card, SR, LC

IPS-2X10GE-SR-INT=

IPS 2-Port 10Gigabit Ethernet Interface Card, SR, LC

IPS-4240-K9-1

IPS 4240 Appliance Sensor

IPS-4260-PWR

Redundant power for 4260

IPS-4260-PWR=

Redundant power for 4260

IPS-4GE-BP-INT

4-Port Copper NIC with bypass for the IPS 4260 and 4270

IPS-4GE-BP-INT=

4-Port Copper NIC with bypass for the IPS 4260 and 4270

IPS4270-FAN=

Spare Fan Module for IPS 4270 appliance

IPS4270-PWR=

Spare Power Supply for IPS 4270 appliance

Product Migration Options

There is no replacement available for the Cisco IPS 4200 Series Accessories at this time.
Customers are encouraged to migrate to the Cisco IPS 4300 or 4500 Series Sensors.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html
Customers may be able to continue to purchase the Cisco IPS 4200 Series Accessories through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html

For More Information

For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/products_end-of-life_policy.html
For more information about the Cisco Product Warranties, go to:
http://www.cisco.com/en/US/products/prod_warranties_listing.html
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cisco/support/notifications.html

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.