PDF(74.4 KB) View with Adobe Reader on a variety of devices
Updated:March 13, 2015
Document ID:1458444902835762
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
1077-Amended
Cisco announces the end-of-sale and end-of life dates for the Cisco NetRanger Sensor Software, No. 1077. The last day to order the affected product(s) is September 13, 2000. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco NetRanger Sensor Software, No. 1077
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
March 15, 2000
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
September 13, 2000
Last Ship Date: App. SW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
December 12, 2000
End of SW Maintenance Releases Date: HW, App. SW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
September 13, 2001
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
September 13, 2001
End of New Service Attachment Date: App. SW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
September 13, 2001
End of Service Contract Renewal Date: App. SW
The last date to extend or renew a service contract for the product.
December 10, 2002
Last Date of Support: HW, App. SW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
September 13, 2003
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
Additional Information
NETRANGER-D1207
NetRanger Director Software - CDROM
See Product Migration Options section for details.
See Product Bulletin
NETRANGER-D1307
NetRanger Director Data Management Software Package
See Product Migration Options section for details.
See Product Bulletin
NETRANGER-H1101
Netranger Sensor - Pentium Pro Platform
See Product Migration Options section for details.
See Product Bulletin
NETRANGER-H1102
Netranger Sensor - AXIL Ultrasparc Clone Platform
See Product Migration Options section for details.
See Product Bulletin
NETRANGER-S1001
NetRanger Sensor Software - CDROM
See Product Migration Options section for details.
See Product Bulletin
Product Migration Options
We encourage hardware and software Sensor customers who are affected by this end-of-life announcement to upgrade to a Cisco-manufactured appliance Sensor before December 2000. The Cisco Technology Migration Program provides trade-in discounts to assist with the process of upgrading. See your Cisco sales representative for information on the Technology Migration Program. Director customers who are affected by this end-of-life announcement are encouraged to upgrade through either a maintenance contract or by purchasing the software upgrade (part number IDS-DIR-U). The following Cisco reference-sold hardware appliances are included in this end-of-life action:
• NETRANGER-H1101-Pentium Pro platform
• NETRANGER-H1102-Axil and Tatung UltraSparc clone platforms
The following WheelGroup hardware appliances are included in this end-of-life action:
• H1101 (all hardware platforms including the Pentium Pro platform)
• H1102 (all hardware platforms including the Axil and Tatung UltraSparc clone platforms)
Any Sensor software that was purchased individually (not bundled with Sensor hardware) that is installed on customer-supplied hardware (such as a Sun Sparc Workstation) is included in this end-of-life action. Included Sensor software part numbers are:
• Cisco NETRANGER-S1001 (along with all the Device Management Options)
• WheelGroup S1001 (along with all the Device Management Options)
Customers who purchased Sensor software using the above part numbers and have upgraded their Sensor software to the Cisco-released Version 2.2 are still affected by this end-of-life action if they are running the software on non-Cisco-manufactured appliance Sensors. All versions of the Director software prior to the 2.2 release are included in this end-of-life action. Director software part numbers include:
• Cisco NETRANGER-D1207
• Cisco NETRANGER-D1307
• WheelGroup D1201 through D1206
• WheelGroup D1301 through D1304
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at
http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html
Customers may be able to continue to purchase the Cisco NetRanger Sensor Software, No. 1077 through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to:
http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html
Feedback