PDF(309.5 KB) View with Adobe Reader on a variety of devices
Updated:December 23, 2013
Document ID:1458423333989123
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Cisco
® CRS-1 Carrier Routing System is the industry's first carrier router offering continuous system operation, unprecedented service flexibility, and system longevity. The Cisco CRS-1 is powered by Cisco IOS
® XR Software, a unique self-healing, distributed operating system. As part of a video-enabled IP Next-Generation Network (NGN), the Cisco CRS-1 Series delivers continuous, always-on operation that easily scales to support the massive bandwidth requirements of visual networking experiences such as high-definition IPTV and Cisco TelePresence
TM. These services demand a platform that delivers predictable forwarding performance and efficient, intelligent fabric-based multicast replication. The Cisco CRS-1 Series enables the Internet and NGNs to handle the approaching zettabyte era of carrier IP communications while protecting network investments for decades to come.
Product Overview
The Cisco CRS-1 Series 2 Port 10 Gigabit Ethernet WAN/LAN-PHY Flexible Interface Module (Figure 1) provides two ports of IEEE 802.3ae-compliant 10 Gigabit Ethernet WAN/LAN-physical (PHY) layer interfaces and two available Cisco I-Flex shared port adapter (SPA) slots. By providing service intelligence, modularity, and configuration flexibility with fully compatible SPAs, the Cisco
I-Flex design offers carriers long-term savings and the ability to handle evolving service delivery requirements, such as SONET-to- Ethernet.
The SPAs can be a mix of Ethernet or Packet over SONET/SDH (POS), and are identical to the SPAs used in other Cisco platforms such as the Cisco XR 12000 Series and the Cisco CRS Carrier Routing System. Gigabit Ethernet physical interface characteristics can be selected using different modular Small Form-Factor Pluggable (SFP) optics: short, long, extra long, and copper interfaces are supported. Extensive per-port and per-VLAN counters simplify network performance monitoring and troubleshooting.
Figure 1. Cisco CRS-1 Series 2 Port 10 Gigabit Ethernet WAN/LAN Flexible Interface Module
Features and Benefits
• Two 10 GE WAN/LAN-PHY interfaces
• Two half-height SPA bays
• Per-port flexibility for distance, selected using the appropriate SFP optical or copper modules
• Compatible with all Cisco CRS Series chassis
• Supports in-use insertion and removal without the need to power down the chassis
• Simple configuration, monitoring, and maintenance
Product Specifications
Table 1. Product Specifications
Feature
Description
Chassis compatibility
Compatible with all Cisco CRS-1 and CRS-3 chassis
Requires one of the following forwarding engines (for CRS-1 chassis): CRS-FP40 (on CRS-4/S and CRS-8/S only), CRS-MSC-40G-B (on CRS-4/S, CRS-8/S, CRS-16/S, and CRS Multi-chassis)
Software compatibility
Cisco IOS XR Software Release 3.8.1 or later for CRS-1
Cisco IOS XR Software Release 4.0.0 or later for CRS-3
Interface types
Integrated Gigabit Ethernet using SFPs for physical interfaces
XFPs supported:
• LR (10 km), ER (40 km), and ZR (80 km)
SPAs can be Packet over SONET/SDH (PoS) or Ethernet. The following SPAs are supported:
• SPA-5X1GE-V2
• SPA-8X1GE
• SPA-8X1GE-V2
• SPA-10X1GE-V2
• SPA-1X10GE-L-V2
• SPA-1X10GE-WL-V2
• SPA-4XOC3-POS
• SPA-8XOC12-POS
• SPA-2XOC48POS/RPR
• SPA-4XOC48POS/RPR
• SPA-OC192POS-VSR
• SPA-OC192POS-XFP
Port density
Two ports of integrated 10 Gigabit Ethernet WAN/LAN-PHY per card, each using XFP physical interfaces
Short-term: 5% to 90%, but not to exceed 0.024 kg water/kg of dry air
Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This refers to a total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period.)
Approvals and Compliance
Table 2. Compliance and Agency Approvals
Feature
Description
Safety standards
UL/CSA/IEC/EN 60950-1
IEC/EN 60825 Laser Safety
AS/NZS 60950.1
FDA - Code of Federal Regulations Laser Safety
EMI
FCC Class A
ICES 003 Class A
AS/NZS 3548 Class A
CISPR 22 (EN55022) Class A
VCCI Class A
BSMI Class A
IEC/EN 61000-3-2: Power Line Harmonics
IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
Cisco CRS-1 Series 2x10GE WAN/LAN Flexible Interface Module
XFP-10GLR-OC192SR (=)
Cisco 10 Gigabit Ethernet LR (10 km) Optics
XFP-10GER-OC192IR (=)
Cisco 10 Gigabit Ethernet ER (40 km) Optics
XFP-10GER-OC192LR (=)
Cisco 10 Gigabit Ethernet ZR (80 km) Optics
Service and Support
Cisco offers numerous innovative services programs to accelerate customer success. These programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, see
Cisco Technical Support Services or
Cisco Advanced Services.
For More Information
For more information about the Cisco CRS-1 Series 2 Port 10Gigabit Ethernet WAN/LAN-PHY Flexible Interface Module, contact your local account representative or visit:
www.cisco.com/go/crs.
Feedback