Guest

Cisco Carrier Routing System

Cisco CRS Modular Power System

  • Viewing Options

  • PDF (312.7 KB)
  • Feedback

The Cisco® CRS Carrier Routing System offers industry-leading performance, advanced services intelligence, environmentally conscious design, and system longevity.

Packet-based data communications are being replaced by video and rich media traversing the IP Next-Generation Network (NGN) in multiple directions, straining the architectural foundations of both public and private networks serving businesses and consumers. As part of the medianet, a media-aware Cisco IP NGN, the Cisco CRS delivers continuous, always-on operations and scales easily from numerous single-chassis form factors to a massive multi-chassis system. Its design provides an industry-leading efficiency consuming lowest power, cooling, and rack-space resources for an intelligent service-rich bandwidth capacity. The CRS-3 platform builds on the CRS-1 being backward and forward compatible, protecting existing and future investments for decades to come.

This data sheet provides detailed product specifications for the Cisco CRS Modular Power System. For more information about the Cisco CRS Family and other available interfaces, visit: http://www.cisco.com/go/crs.

Figure 1. Cisco CRS Modular Power System

The Cisco CRS Modular Power System offers the following key benefits:

Modular design for easy power-capacity growth

Pay-as-you-grow model (add power in tandem with bandwidth-capacity increase)

Standard power module across 8 slots, 16 slots, and fabric chassis

Single-phase AC input allowing granular addition of power module

Two shelves per chassis, providing 1+1 redundancy

Non-disruptive, hitless upgrade of modules

No power zone restrictions

Reduced maximum power capacity requirements for lower operational expenses

Intelligent control with Power Management Software(future)

Product Specifications

Table 1. Product Specifications

Feature

Description

Chassis compatibility

Compatible with 8-slot, 16-slot and fabric card chassis

Software compatibility

Cisco IOS XR Software Release 3.9.0 or later

AC power module

Single phase, 200 to 240 VAC, 16A

DC power module

–48VDC/50A, –60VDC/40A

8 slots AC

9 KW

8 slots DC

8.4 KW

16 slots AC

15 KW

16 slots DC

12.6 KW

Fabric chassis AC

9 KW

Fabric chassis DC

8.4 KW

Approvals and Compliance

Table 2 gives standards compliance information for the Cisco CRS Modular Power System.

Table 2. Compliance and Agency Approvals

Feature

Description

Safety Standards

UL/CSA/IEC/EN 60950-1
IEC/EN 60825 Laser Safety
ACA TS001
AS/NZS 60950
FDA—Code of Federal Regulations Laser Safety

EMI

FCC Class A
ICES 003 Class A
AS/NZS 3548 Class A
CISPR 22 (EN55022) Class A
VCCI Class A
BSMI Class A
IEC/EN 61000-3-2: Power Line Harmonics
IEC/EN 61000-3-3: Voltage Fluctuations and Flicker

Immunity (Basic Standards)

IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV contact, 15-kV air)
IEC/EN-61000-4-3: Radiated Immunity (10V/m)
IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV power, 1-kV signal)
IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)
IEC/EN-61000-4-5: Signal Ports (1 kV)
IEC/EN-61000-4-5: Surge DC Port (1 kV)
IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10 Vrms)
IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations

ETSI and EN

EN300 386: Telecommunications Network Equipment (EMC)
EN55022: Information Technology Equipment (Emissions)
EN55024: Information Technology Equipment (Immunity)
EN50082-1/EN-61000-6-1: Generic Immunity Standard

Network Equipment Building

Standards (NEBS)

This product is designed to meet the following requirements (qualification in progress):

SR-3580: NEBS Criteria Levels (Level 3)
GR-1089-CORE: NEBS EMC and Safety
GR-63-CORE: NEBS Physical Protection

Ordering Information

To place an order, contact your local Cisco representative or visit the Ordering page on http://www.cisco.com. Use the ordering information in Table 3.

Table 3. Ordering Information

Production ID

Description

CRS-16-ACKIT-M(=)

CRS Modular power AC kit for 16 slots Chassis, 15KW

CRS-16-ACKIT-M-B(=)

CRS Modular power AC kit for 16 slots Chassis Enhanced, 15KW

CRS-16-DCKIT-M(=)

CRS Modular power DC kit for 16 slots Chassis, 12.6KW

CRS-16-DCKIT-M-B(=)

CRS Modular power DC kit for 16 slots Chassis Enhanced, 12.6KW

CRS-FCC-ACKIT-M(=)

CRS Modular power AC kit for Fabric Chassis, 9KW

CRS-FCC-DCKIT-M(=)

CRS Modular power DC kit for Fabric Chassis, 8.4KW

CRS-8-ACKIT-M(=)

CRS Modular power AC kit for 8 slots Chassis, 9KW

CRS-8-ACKIT-M-B(=)

CRS Modular power AC kit for 8 slots Chassis Enhanced, 9KW

CRS-8-DCKIT-M(=)

CRS Modular power DC kit for 8 slots Chassis, 8.4KW

CRS-8-DCKIT-M-B(=)

CRS Modular power DC kit for 8 slots Chassis Enhanced, 8.4KW

Service and Support

Cisco delivers innovative services programs through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, contact your local Cisco representative or visit http://www.cisco.com.

For More Information

For more information about the Cisco CRS Modular Power System, please contact your local Cisco representative or visit: http://www.cisco.com/go/crs.