Cisco CRS-3 20-Port 10GE LAN/WAN-PHY Interface Module
Available Languages
The Cisco® CRS-3 Carrier Routing System offers industry-leading performance, advanced services intelligence, environmentally conscious design, and system longevity. The Cisco CRS-3 is powered by the Cisco Flow Array - a chipset architecture based on multidimensional engineering and Cisco IOS® XR Software, a unique self-healing, distributed operating system.
Packet-based data communications are being replaced by video and rich media traversing the IP Next-Generation Network (NGN) in multiple directions, straining the architectural foundations of both public and private networks serving businesses and consumers. As part of the medianet, a media-aware Cisco IP NGN, the Cisco CRS-3 delivers continuous, always-on operations and scales easily from numerous single-chassis form factors to a massive multi-chassis system. Its design provides an industry-leading efficiency consuming lowest power, cooling and rack-space resources for an intelligent service-rich bandwidth capacity. The CRS-3 builds on the CRS-1 being backward and forward compatible, protecting existing and future investments for decades to come.
This data sheet provides detailed product specifications for the Cisco CRS-3 20-Port 10GE LAN/WAN-PHY Interface Module (product number 20X10GBE-WL-XFP). For more information about the Cisco CRS Family or about other available interfaces, visit: http://www.cisco.com/go/crs.
Product Specifications
Table 1 gives specifications for the Cisco CRS-3 20-Port 10GE LAN/WAN-PHY Interface Module.
Table 1. Product Specifications
Approvals and Compliance
Table 2 gives standards compliance information for the Cisco CRS-3 20-Port 10GE LAN/WAN-PHY Interface Module.
Table 2. Compliance and Agency Approvals
| Feature |
Description |
| Safety Standards |
● UL/CSA/IEC/EN 60950-1
● AS/NZS 60950.1
● IEC/EN 60825 Laser Safety
● FDA – Code of Federal Regulations Laser Safety
|
| EMI |
● FCC Class A
● ICES 003 Class A
● AS/NZS CISPR 22 Class A
● CISPR 22 (EN55022) Class A
● VCCI Class A
● IEC/EN 61000-3-2: Power Line Harmonics
● IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
|
| Immunity (Basic Standards) |
● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV contact, 15-kV air)
● IEC/EN-61000-4-3: Radiated Immunity (10V/m)
● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV power, 1-kV signal)
● IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)
● IEC/EN-61000-4-5: Signal Ports (1 kV)
● IEC/EN-61000-4-5: Surge DC Port (1 kV)
● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10 Vrms)
● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
● IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations
|
| ETSI and EN |
● EN300 386: Telecommunications Network Equipment (EMC)
● EN55022: Information Technology Equipment (Emissions)
● EN55024: Information Technology Equipment (Immunity)
● EN50082-1/EN-61000-6-1: Generic Immunity Standard
|
| Network Equipment Building Standards (NEBS) |
This product is designed to meet the following requirements (qualification in progress):
● SR-3580: NEBS Criteria Levels (Level 3)
● GR-1089-CORE: NEBS EMC and Safety
● GR-63-CORE: NEBS Physical Protection
|
Additional Specifications
Table 3. Additional Specifications
| Gigabit Ethernet XFP Optics |
Maximum Distance |
| 10 Gigabit Ethernet short-reach (SR) optics (multimode fiber) |
300 meters |
| 10 Gigabit Ethernet long-reach (LR) optics (single-mode fiber) |
6.2 miles (10 km) |
| 10 Gigabit Ethernet extended-reach (ER) optics (single-mode fiber) |
25 miles (40 km) |
| 10 Gigabit Ethernet long-haul (ZR) optics (single-mode fiber) |
50 miles (80 km) |
| 10 Gigabit DWDM fixed wavelength XFP (100-GHz ITU grid) |
50 miles (80 km) |
| 10 Gigabit DWDM Tunable XFP (50-GHz ITU grid)* |
50 miles (80 km) |
* Not yet qualified on this card; planned for future release
Ordering Information
To place an order, contact your local Cisco representative or visit the Cisco Ordering Home Page. Use the ordering information in Table 4.
Table 4. Ordering Information
| Product Part Number |
Product Name |
| 20X10GBE-WL-XFP(=) |
Cisco CRS-3 20-port 10GbE LAN/WAN-PHY Interface Module |
| XFP-10G-MM-SR(=) |
Cisco 10 Gigabit Ethernet SR (300 meters) Optics |
| XFP10GLR-192SR-L(=) |
Low Power multirate XFP supporting 10GBASE-LR and OC-192 SR |
| XFP10GER-192IR-L(=) |
Low Power multirate XFP supporting 10GBASE-ER and OC-192 IR |
| XFP-10GZR-OC192LR(=) |
Cisco 10 Gigabit Ethernet ZR (80 km) Optics |
| DWDM-XFP-xx.xx(=) |
Cisco 10 Gigabit DWDM (80 km) Optics |
Cisco Services
Cisco Services make networks, applications, and the people who use them work better together.
Today, the network is a strategic platform in a world that demands better integration between people, information, and ideas. The network works better when services, together with products, create solutions aligned with business needs and opportunities.
The unique Cisco Lifecycle approach to services defines the requisite activities at each phase of the network lifecycle to help ensure service excellence. With a collaborative delivery methodology that joins the forces of Cisco, our skilled network of partners, and our customers, we achieve the best results.
Cisco Capital
Financing to Help You Achieve Your Objectives
Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. We can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment. And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.
For More Information
For more information about the Cisco CRS-3 20-Port 10GE LAN/WAN-PHY Interface Module, contact your local Cisco representative or visit: http://www.cisco.com/go/crs.
Feedback