Cisco 880VA Series Integrated Services Routers Data Sheet
Available Languages
Product Overview
The new Cisco 880VA Series Integrated Services Routers (ISRs) are part of the Cisco Integrated Services Routers Generation 2 (ISR G2) portfolio. The Cisco 880VA Series Routers support DSL multimode, including very-high-speed DSL 2 (VDSL2) and asymmetric DSL 2+ (ADSL2+). The routers support VDSL2 and ADSL2+ on a single WAN interface, thus providing secure, cost-effective connectivity to small businesses, enterprise small branch offices, and teleworker sites (Figure 1).
Features and Benefits
Cisco 880VA Series ISRs are fixed-configuration routers that provide collaborative business solutions for secure voice and data communications to small businesses and enterprise teleworkers. They offer concurrent broadband services over multiple DSL technologies to provide business continuity. The routers provide the performance required for concurrent services, including firewall, intrusion prevention, content filtering, and encryption for VPNs; and quality-of-service (QoS) features for optimizing voice and video applications. In addition, the web-based Cisco Configuration Professional configuration tool simplifies setup and deployment. Centralized management capabilities give network managers visibility and control of the network configurations at the remote site.
Cisco 880 Series Integrated Services Routers offer:
● High performance for broadband access in small offices and small branch-office and teleworker sites
● Collaborative services with secure analog, digital voice, and data communications
● Business continuity with redundant WAN links: Multimode DSL (VDSL2 and ADSL2 and 2+) over telephone service and ISDN
● Enhanced security, including:
◦ Firewall with advance application and control for email, Instant Messaging (IM), and HTTP traffic
◦ Site-to-site remote-access and dynamic VPN services: IP Security (IPsec) VPNs (Triple Data Encryption Standard [3DES] or Advanced Encryption Standard [AES]), Dynamic Multipoint VPN (DMVPN), Group Encrypted Transport VPN with onboard acceleration, and Secure Sockets Layer (SSL) VPN
◦ Intrusion prevention system (IPS): An inline, deep-packet inspection feature that effectively mitigates a wide range of network attacks
◦ Content filtering: A subscription-based integrated security solution that offers category-based reputation rating; keyword blocking; and protection against adware, malware, spyware, and URL blocking
● Four-port 10/100 Fast Ethernet managed switch with VLAN support; two ports support Power over Ethernet (PoE) for powering IP phones or external access points
● CON/AUX port for console or external modem
● One USB 1.1 port
● Easy setup, deployment, and remote-management capabilities through web-based tools and Cisco IOS® Software
Figure 1 shows a Cisco 880VA Integrated Services Router, and Table 1 lists the data models.
Table 1. Cisco 880VA Series Data Models
| Models |
WAN Interface |
LAN Interfaces |
802.11g/n Option |
Integrated Third-Generation (3G) WAN Capabilities |
Integrated ISDN Dial Backup |
| Cisco 886VA |
Multimode VDSL2/ |
4-port 10/100-Mbps managed switch |
No |
No |
Yes |
| Cisco 887VA |
Multimode VDSL2/ |
4-port 10/100-Mbps managed switch |
No |
No |
No |
| Cisco 887VA-M |
Multimode VDSL2/ |
4-port 10/100-Mbps managed switch |
No |
No |
No |
| Cisco 886VA-J |
Multimode VDSL2/ |
4-port 10/100-Mbps managed switch |
No |
No |
No |
Features and Benefits
Table 2 lists the features and benefits of the Cisco 880VA Series Integrated Services Routers.
Table 2. Features and Benefits of Cisco 880VA Series Routers
Summary
Cisco 880VA Series Integrated Services Routers combine increased network performance with advanced security to allow small-office customers to get the most from their broadband connections. You can deploy Cisco 880VA Series Routers at any small-office location. With the Cisco 880VA Series, enterprise IT managers and service providers can take advantage of a solution that they can easily set up at the remote site and centrally manage to reduce ongoing operating costs.
Product Specifications
Cisco IOS Software Support
Table 3 lists the minimum Cisco IOS Software releases and the default Cisco IOS Software feature sets.
Table 3. Cisco IOS Software Releases and Default Cisco IOS Software Feature Sets
| Models |
Universal Image |
Default Feature Set |
First Cisco IOS Software Release |
| Cisco 886VA, 887VA, and 887VA-M |
Data |
Advanced Security |
15.1(2)T |
| Cisco 886VA and 887VA SEC |
Data |
Advanced IP |
15.1(2)T |
| Cisco 886VA-J |
Data |
Advanced Security |
15.1(4)M |
| C886VA-K9, C886VAJ-K9, C887VA-K9, C887VAM-K9 |
Data |
Advanced Security |
15.3(3)M2, 15.4(1)T |
Tables 4 and 5 list software features of the Cisco 880VA Series.
Table 4. Cisco IOS Software Features on Cisco 880 Series: Advanced Security Feature Set (Default)
Cisco IOS Software Advanced IP Services Feature Set (Optional Software Upgrade)
The Advanced IP Services software image has all the features of the Advanced Security software image, in addition to the features listed in Table 4.
Table 5. Cisco IOS Software Features on Cisco 880 Series: Advanced IP Services Feature Set (Optional Software Upgrade)
| Feature |
Description |
| IP and IP services features |
● Layer 2 Tunneling Protocol Version 3 (L2TPv3)
|
| Switch features |
|
| Security features |
|
| QoS features |
|
| IPv6 features |
System Specifications
Table 6 lists the system specifications for the Cisco 880 Series Routers.
Table 6. System Specifications
| Feature |
Description |
| Default DRAM |
● 256 MB on Cisco 880 Series data models
|
| Maximum DRAM |
768 MB |
| Default and maximum flash memory |
● 128 MB on Cisco 880 Series data models
|
| WAN |
● Multimode VDSL2 and ADSl2 and 2+ over ISDN with ISDN backup
● Multimode VDSL2 and ADSl2 and 2+ over basic telephone service
|
| LAN switch |
Managed 4-port 10/100BASE-T with autosensing MDI/MDX for autocrossover |
| Console or auxiliary port |
RJ-45 |
| One USB 1.1 port for advanced security features such as security tokens or USB flash memory |
● One USB 1.1 port on Cisco 880 Series Routers
● USB devices supported:
◦ USB eTokens
◦ USB flash memory
Note: USB 1.1 port cannot be used for connecting external devices other than those specified at: http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.html. |
| ISDN Basic Rate Interface (BRI) S/T |
Available on:
● Cisco 886VA for out-of-band management and dial backup or primary
|
| External power supply |
Universal 100- to 240-VAC input; 60W, 12-VDC output |
| Physical dimensions and weight |
Product dimensions, nonwireless models:
● H x W x D = 1.9 x 12.8 x 9.8 in. (48 x 325 x 249 mm) (includes rubber feet)
● H x W x D = 1.75 x 12.8 x 9.8 in. (44 x 325 x 249 mm) (without rubber feet)
Product dimensions, wireless models:
● H x W x D = 1.9 x 12.8 x 10.4 in. (48 x 325 x 264 mm) (includes rubber feet)
● H x W x D = 1.75 x 12.8 x 10.4 in. (44 x 325 x 264 mm) (without rubber feet; excludes antennas)
● Weight: 5.5 lb (2.5 kg) maximum
|
| Power |
Product power specifications:
● AC input voltage: 100 to 240 VAC
● Frequency: 50 to 60 Hz
● Maximum output power: 60W
● Output voltages: 12 VDC
Optional internal PoE with external adapter:
● Maximum output power: 80W
● External output voltage: 48 VDC
|
| Approvals and compliance |
Emissions:
●
47 CFR Part 15: 2006
●
CISPR22: 2005
●
EN300386: V1.3.3: 2005
●
EN55022: 2006
●
EN61000-3-2: 2000 [Inc amd 1 and 2]
●
EN61000-3-3: 1995 [+ amd 1: 2001]
●
ICES-003 Issue 4: 2004
●
KN 22: 2005
●
VCCI: V-3/2006.04
Immunity:
●
CISPR24: 1997 [+ amd 1 and 2]
●
EN300386: V1.3.3: 2005
●
EN50082-1: 1992
●
EN50082-1: 1997
●
EN55024: 1998 [+ amd 1 and 2]
●
EN61000-6-1: 2001
The following are supported on teleworker models:
● AS/NRZ 3548: 1992 Class B
● CFR 47 Part 15 Class B
● EN60555-2 Class B
● EN55022 Class B
● ICES-003, Issue 2, Class B, April 1997S
|
| Environmental operating range |
● Nonoperating temperature: -4 to 149°F (-20 to 65°C)
● Nonoperating humidity: 5 to 95% relative humidity (noncondensing)
● Nonoperating altitude: 0 to 15,000 ft (0 to 4570m)
● Operating temperature
◦ At sea level: 32 to 104°F (0 to 40°C)
◦ Up 10,000ft: 32 to 77 °F (0 to 25°C)
◦
Derating 2.7°F/10000 ft (1.5°C [304.8m])
● Operating humidity: 10 to 85% relative humidity (noncondensing)
● Operating altitude: 0 to 10,000 ft (0 to 3000m)
|
DSL Specifications
Tables 7 through 10 list the DSL feature specifications and DSL access multiplexer (DSLAM) interoperability support for the Cisco 880 Series Routers. For more information and details about DSLAM and line-card interoperability, please refer to the following document: What Is Cisco ISR and ISR G2 xDSL Interoperability?
Table 7. DSL Features Specifications
| DSL Specifications |
|
| Multimode DSL (VDSL2 and ADSL2 and 2+) |
● Broadcom chipset
● Dying gasp
● IEEE 802.1q VLAN tagging
● Independent DSL firmware loading
VDSL2:
● ITU G.993.2 (VDSL2)
● 997 and 998 band plans
● VDSL2 profiles: 8a, 8b, 8c, 8d, 12a, 12b, and 17a
● U0 band support (25-276 kHz)
● Ethernet PTM mode only based on IEEE 802.3ah 64/65 octet encapsulation
● DELT diagnostics mode
ADSL2 and 2+:
● ADSL over basic telephone service with Annex A T1.413, ITU
G.992.1 (ADSL 1 G.Dmt), G.992.3 (ADSL2 and G.DMT bis), and G.992.5 (ADSL2+ and G.DMT bis 2+)
● Cisco 887VA: Optimized for Annex A
● C887VA: Optimized for Annex A
● ADSL over basic telephone service with Annex M (extended upstream bandwidth) G.992.3 (ADSL2) and G.992.5 (ADSL2+)
● Cisco 887VA-M: Optimized for PSD Mask EU-64 M9; also compatible with Annex A
● Cisco 887VA-M: Supports UK Annex M
● C887VAM: Optimized for PSD Mask EU-64 M9; also compatible with Annex A
● C887VAM: Supports Annex M
● ADSL over ISDN with Annex B ITU G.992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)
● Cisco 886VA: Optimized for Annex B
● C886VA: Optimized for Annex B
● ADSL over ISDN with Annex J Full Digital ISDN ITU-T G.992.3 (ADSL2) and G.992.5 (ADSL2+)
● Cisco 886VA-J: Optimized for Annex J
● C886VAJ: Optimized for Annex J
● G.994.1 ITU G.hs
● Reach-extended ADSL2 (G.922.3) Annex L for increased performance on loop lengths greater than 16,000 feet (4876.8m) from central office
● T1.413 ANSI ADSL DMT issue 2 compliance
● DSL Forum TR-067, TR-100, and TR-112 compliance
● Inpulse Noise Protection (INP) and extended INP-Delay
● Seamless Rate Adaptation
● Physical Layer Retransmission (PhyR)
● Downstream Power Back Off (DPBO)
● ATM mode only
|
Table 8. VDSL2 over ISDN and Basic Telephone Service DSLAM Interoperability for Cisco 886VA and 887VA
| DSLAM |
VDSL2 over ISDN and Basic Telephone Service Line-Card Chipset |
| ZTE 9806 |
Broadcom |
| Alcatel ISAM 7302 |
Ikanos |
| Alcatel ISAM 7302 |
Conexant |
| Huawei 5603 |
Broadcom |
Table 9. ADSL over ISDN DSLAM Interoperability for Cisco 886VA
| DSLAM |
ADSL2 and 2+ over ISDN Line-Card Chipset |
| Alcatel ASAM7300 |
Broadcom |
| ECI Hi-Focus 480 |
Infineon |
| Ericsson ECN320 |
Broadcom |
| Siemens HiX 5300 |
Infineon |
Table 10. ADSL over Basic Telephone Service DSLAM Interoperability for Cisco 887VA
| DSLAM |
ADSL2 and 2+ over Basic Telephone Service Line-Card Chipset |
| Alcatel ASAM7300 |
Broadcom |
| Alcatel ISAM 7302 |
Broadcom |
| Ericsson EDA2.1 |
Broadcom |
| ECI Hi-Focus 480 |
Infineon |
| Fujitsu FDX Hub 1000 |
Infineon |
| Fujitsu FDX Hub 1000 |
Texas Instruments |
| Huawei MA5600 |
Conexant |
| Lucent Stinger |
Conexant |
| Nokia D500 |
Globespan |
Table 11 lists ordering information for the Cisco 880 Series. To place an order, visit the Cisco ordering homepage.
Table 11. Ordering Information
| CISCO886VA-K9 |
Cisco 886VA router with VDSL2/ADSL2+ over ISDN |
| CISCO886VA-SEC-K9 |
Cisco 886VA Secure router with VDSL2/ADSL2+ over ISDN |
| C886VA-K9 |
Cisco 886VA router with VDSL2/ADSL2+ over ISDN - Lead Free |
| CISCO886VA-J-K9 |
Cisco 886VA router with VDSL2/ADSL2+ over ISDN Annex J |
| C886VAJ-K9 |
Cisco 886VA router with VDSL2/ADSL2+ over ISDN Annex J – Lead Free |
| CISCO887VA-K9 |
Cisco 887VA router with VDSL2/ADSL2+ over POTS |
| CISCO887VA-SEC-K9 |
Cisco 887VA Secure router with VDSL2/ADSL2+ over POTS |
| C887VA-K9 |
Cisco 887VA router with VDSL2/ADSL2+ over POTS - Lead Free |
| CISCO887VA-M-K9 |
Cisco 887VA router with VDSL2/ADSL2+ over POTS Annex M router |
| C887VAM-K9 |
Cisco 887VA router with VDSL2/ADSL2+ over POTS Annex M router – Lead Free |
| POE |
|
| DRAM |
|
| FL-8XX-512U1GB* |
CISCO800 DRAM Upgrade from 512MB to 1GB (For |
| Cisco IOS Universal Software for Cisco 880 |
|
| S880DUDK9[1] |
Cisco 880 Series IOS UNIVERSAL DATA |
| Software License for Cisco 880 Data |
|
| SL-880-ADVSEC-NPE |
Cisco 880 Advanced Security NPE License PAK (Paper) |
| SL-880-AIS-NPE (upgrade option) |
Cisco 880 Advanced IP Services NPE License PAK (Paper) |
| Software License for Cisco 880 Data (Bulk) |
|
| L-SL-800-SEC-K9 |
Advanced IP e-Delivery PAK for Cisco 800 Series |
| Security Services |
|
| One year subscription to Content Filtering for Cisco 881/888-URL/Phishing |
|
| SSL |
|
| Feature License SSL VPN for Up to 10 Users (incremental), for 12.4T based IOS releases only |
|
| FL-SSLVPN10-K9 |
Feature License SSL VPN for Up to 10 Users (incremental), for 15.x based IOS releases only |
| Router Software |
|
| C880data-universalk9-mz |
Universal image for Cisco 880 ISR Data Router Series |
| C800data-universalk9-mz** |
Universal image for Cisco 880 ISR Data Router Series |
* This Memory license is only valid for C881-K9, C886VA-K9, C886VAJ-K9, C887VA-K9, and C887VA-M-K9
** This universal image is valid for C881-K9, C886VA-K9, C886VAJ-K9, C887VA-K9, and C887VA-M-K9
Cisco License Manager is a secure client- and server-based application used to manage Cisco IOS Software activation and licenses. For more information about Cisco License Manager, visit http://www.cisco.com/go/clm.
Cisco Services for the Branch Office
Services from Cisco and our certified partners can help you reduce the cost and complexity of branch-office deployments. We have the depth and breadth of experience across technologies to architect a blueprint for a branch-office solution to meet your company's needs. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help maintain operational health, strengthen software application functions, solve performance problems, and lower expenses. Optimization services are designed to continually improve performance and help your team succeed with new technologies. For more information, please visit http://www.cisco.com/go/services.
Warranty Information
Warranty information is available on Cisco.com at the Product Warranties page.
Feedback