PDF(177.7 KB) View with Adobe Reader on a variety of devices
Updated:September 10, 2009
Document ID:1458169286318373
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL6849
Cisco announces the end-of-sale and end-of life dates for the Cisco 7200VXR and uBR7200 Series NPE-400 Network Processing Engine. The last day to order the affected product(s) is September 4, 2010. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco 7200VXR and uBR7200 Series NPE-400 Network Processing Engine
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
September 9, 2009
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
September 9, 2010
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
December 9, 2010
End of SW Maintenance Releases Date: HW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
September 9, 2011
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
September 9, 2011
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
September 9, 2011
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
December 8, 2014
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
September 8, 2015
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
Additional Information
7204VXR/400
7204VXR with NPE-400 and I/O Controller with 2FE/E Ports
7206VXR/NPE-G1
7206VXR with NPE-G1 includes 3GigE/FE/E Ports and IP SW
--
7204VXR/400
7204VXR with NPE-400 and I/O Controller with 2FE/E Ports
7206VXR/NPE-G2
7206VXR with NPE-G2 includes 3GigE/FE/E Ports and IP SW
--
MEM-NPE-400-256MB
256MB Memory for NPE-400 in 7200 Series
There is currently no replacement product available for this product.
MEM-NPE-400-256MB=
256MB Memory for NPE-400 in 7200 Series
There is currently no replacement product available for this product.
MEM-NPE-400-512MB
512MB Memory for NPE-400 in 7200 Series
There is currently no replacement product available for this product.
MEM-NPE-400-512MB=
512MB Memory for NPE-400 in 7200 Series
There is currently no replacement product available for this product.
NPE-400
7200VXR NPE-400
NPE-G1
7200 Network Processing Engine with 3 GE/FE/E ports
--
NPE-400
7200VXR NPE-400
NPE-G2
7200 series NPE-G2 engine with 3 GE/FE/E ports
--
NPE-400=
7200VXR NPE-400, SPARE
NPE-G1=
7200 Network Processing Engine with 3 GE/FE/E ports
--
NPE-400=
7200VXR NPE-400, SPARE
NPE-G2=
7200 series NPE-G2 engine with 3 GE/FE/E ports, SPARE
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at
http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html
Customers may be able to continue to purchase the Cisco 7200VXR and uBR7200 Series NPE-400 Network Processing Engine through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to:
http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html
Feedback