Guest

Cisco 2600 Series Multiservice Platforms

End-of-Sale and End-of-Life Announcement for the Cisco 2621XM-DC Multiservice Router

  • Viewing Options

  • PDF (50.7 KB)
  • Feedback

EOL7246

Cisco announces the end-of-sale and end-of life dates for the Cisco 2621XM-DC Multiservice Router. The last day to order the affected product(s) is May 16, 2011. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco 2621XM-DC Multiservice Router

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

November 15, 2010

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

May 16, 2011

Last Ship Date: HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

August 14, 2011

End of SW Maintenance Releases Date: HW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

May 15, 2012

End of Routine Failure Analysis Date: HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

May 15, 2012

End of New Service Attachment Date: HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

May 15, 2012

End of Service Contract Renewal Date: HW

The last date to extend or renew a service contract for the product.

August 11, 2015

Last Date of Support: HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

May 31, 2016


HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

CISCO2621XM-DC

Mid Perf Dual 10/100 Ethernet Rtr w/Cisco IOS IP,32F/128D-DC

CISCO2911/K9

Cisco 2911 w/3 GE,4 EHWIC,2 DSP,1 SM,256MB CF,512MB DRAM,IPB

--

MEM2600XM-128DBOT=

128MB DRAM and BOOTROM for 2600XM Series

There is currently no replacement product available for this product.

   

MEM2600XM-128U160D

128 to 160MB DRAM factory upgrade for Cisco 2600XM

There is currently no replacement product available for this product.

   

MEM2600XM-128U256D

128 to 256MB DRAM factory upgrade for Cisco 2600XM

There is currently no replacement product available for this product.

   

MEM2600XM-16FS=

16MB Flash SIMM for the Cisco 2600XM

There is currently no replacement product available for this product.

   

MEM2600XM-16U32FS

16 to 32 MB Flash Factory Upgrade for the Cisco 2600XM

There is currently no replacement product available for this product.

   

MEM2600XM-16U32FS1

16 to 32MB Flash Factory Upgrade for the Cisco 2600XM

There is currently no replacement product available for this product.

   

MEM2600XM-32FS=

32MB Flash SIMM for the Cisco 2600XM

There is currently no replacement product available for this product.

   

PWR-2600-DC=

Cisco 2600/2600XM DC power supply spare

PWR-2911-DC

Cisco 2911 DC Power Supply

--

Product Migration Options

Customers are encouraged to migrate to the Cisco 2911 Integrated Services Router with the DC power option. Information about the Cisco 2900 Series Routers can be found at: http://www.cisco.com/en/US/products/ps10537/index.html.
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html
Customers may be able to continue to purchase the Cisco 2621XM-DC Multiservice Router through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html

For More Information

For more information about the Cisco 2911 Integrated Services Router, visit http://www.cisco.com/en/US/products/ps10537/index.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/products_end-of-life_policy.html
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cisco/support/notifications.html

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.