Guest

Cisco 2600 Series Multiservice Platforms

End-of-Sale and End-of-Life Announcement for the Cisco 2621XM-DC Terminal Server Bundle, 2600XM Multiservice Platform Spares & Accessories

  • Viewing Options

  • PDF (63.1 KB)
  • Feedback

EOL6399

Cisco ® announces the end-of-sale and end-of life dates for the Cisco 2621XM-DC Terminal Server Bundle and 2600XM Multiservice Platform Spares & Accessories. The last day to order the affected product(s) is October 10, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco 2621XM-DC Terminal Server Bundle and 2600XM Multiservice Platform Spares & Accessories

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

April 11, 2008

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

October 10, 2008

Last Ship Date: HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

January 8, 2009

End of Routine Failure Analysis Date: HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

October 10, 2009

End of New Service Attachment Date: HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

October 10, 2009

End of Service Contract Renewal Date: HW

The last date to extend or renew a service contract for the product.

January 5, 2013

Last Date of Support:

HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

October 9, 2013

HW = Hardware        OS SW = Operating System Software        App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Description

CISCO2621XM-16TSDC

Cisco 2621XM-DC With NM-16A and WIC-1T

Cisco 2800 Series Integrated Services Routers

ACS-2600RPS=

RPS Field Upgrade for the Cisco 2600XM/Classic Models

Cisco 2800 Series Integrated Services Routers

ACS-2691RPS

RPS Factory Upgrade kit for the Cisco 2691

Cisco 2800 Series Integrated Services Routers

ACS-2691RPS=

RPS Field Upgrade for the Cisco 2691

Cisco 2800 Series Integrated Services Routers

BOOT-2600=

Boot ROM for Cisco 2600 Series

Cisco 2800 Series Integrated Services Routers

CVPN2600FIPS/KIT=

Kit (Instructions, labels) to configure 2600 for FIPS

Cisco 2800 Series Integrated Services Routers

MEM2600-16FS=

16 MB Flash SIMM for the Cisco 2600 Series

Cisco 2800 Series Integrated Services Routers

MEM2600-32D

32MB DRAM FOR 2600 SERIES

Cisco 2800 Series Integrated Services Routers

MEM2600-32D=

32 MB DRAM DIMM for the Cisco 2600 Series

Cisco 2800 Series Integrated Services Routers

MEM2600XM-32D=

32MB DIMM DRAM for the Cisco 2600XM

Cisco 2800 Series Integrated Services Routers

MEM2600XM-64D=

64MB DIMM DRAM for the Cisco 2600XM

Cisco 2800 Series Integrated Services Routers

MEM2691-128CF=

128MB Cisco 2691 Compact Flash Memory

Cisco 2800 Series Integrated Services Routers

MEM2691-128D=

128MB DIMM DRAM for the Cisco 2691

Cisco 2800 Series Integrated Services Routers

MEM2691-32CF=

32MB Cisco 2691 Compact Flash Memory

Cisco 2800 Series Integrated Services Routers

MEM2691-64CF=

64MB Cisco 2691 Compact Flash Memory

Cisco 2800 Series Integrated Services Routers

MEM2691-64D

64MB DIMM DRAM Memory factory default for the Cisco 2691

Cisco 2800 Series Integrated Services Routers

MEM2691-64D=

64MB DIMM DRAM for the Cisco 2691

Cisco 2800 Series Integrated Services Routers

PWR-2600-AC=

Cisco 2600/2600XM AC power supply spare

Cisco 2800 Series Integrated Services Routers

PWR-2691-AC

AC Power Supply for the Cisco 2691

Cisco 2800 Series Integrated Services Routers

PWR-2691-AC=

AC Power Supply for the Cisco 2691

Cisco 2800 Series Integrated Services Routers

Product Migration Options

Customers are encouraged to migrate to the Cisco 2800 Series Integrated Services Routers. Information about this product can be found at: http://www.cisco.com/en/US/products/ps5854/index.html.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.

For More Information

For more information about the Cisco 2800 Series Integrated Services Routers, visit http://www.cisco.com/en/US/products/ps5854/index.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to:
To subscribe to receive end-of-life/end-of-sale information, go to: